Fairmont drag car build - Strut repair & setting on four tires! 5/25/15
Posted 25 August 2012 - 03:33 PM
Thanks Darryl. I'm planning to get another pic update, here shortly, but wanted to let you know I appreciate your comment.
Hey Dave - Some new stuff will be coming shortly!
Posted 25 August 2012 - 04:01 PM
As you can see above, I used masking tape to make sure I the pieced diagonals are straight. Sighting across them, I think it worked! LOL
The main lower control arm is .050 stainless tubing with RB Motion 1504 rod end and nut where it will attach to the chassis bracket. .8MM brass nut, bolt and washers are from Scale Hardware. Lower strut mount is .100" styrene rod, drilled to accept the stainless tubing and provide a receiver for the lower strut mount. I cut tiny pieces of .080 brass to serve as spacers between the photo etch A-arm mounting tabs. The tabs slide over the .062 tubing and positively locate them. The width of the tabs matches (more or less) with the .080 OD of the rails. I'll have to do a tiny bit of gap filling, but it shouldn't be much.
The front frame rails are constructed out of .063 brass tubing telescoped inside .080 brass. I tried to use a file to gnurl the .063 to make the fit a bit tighter. You can see where the scuffed area is.
Hopefully I'll get another update posted before the end of the weekend...
Posted 25 August 2012 - 05:14 PM
Posted 26 August 2012 - 01:35 PM
Posted 27 August 2012 - 07:51 AM
Hey Ben - Yeah, getting those roller rockers adjusted is a pain because I can't find a feeler gauge that is thin enough...
Thanks for the kind words, Dave. I'm going to be doing several things on this that I've never done before and I'm sure you and others will be called upon to (hopefully) get some of the details right.
Posted 27 August 2012 - 08:14 AM
By the way I have the first coats of paint on mine and should have it done in the next couple weeks.
Everybody the casting on this car is the BEST I have ever seen. Thank you Scott. Good luck and waiting
for the next update.
Posted 27 August 2012 - 10:00 AM
Posted 27 August 2012 - 05:26 PM
Posted 05 September 2012 - 05:06 PM
Chris, Jim and Bill - thanks for your kind words. I've been plugging away on this as time has allowed and have made a bit of progress.
Here are the semi-finished forward rails with part of the lower A-arms attached.
I built a jig to get the frame rail spacing uniform front to rear and to match the central frame rail section.
This shows the forward frame rails assembled with the front crossmember and the PE foldable tabs I'm using to attach the diagonal portion of the lower A-arms. Because I'm planning/hoping to use this frame section as a master for resin-cast pieces, the A-arm material and RB Motion joints are a bit larger than they would be in 1:1, but I feel better about building in a bit more cross-sectional strength since these will be somewhat delicate pieces to cast.
I've got everything more or less attached together. There is a bit more filling and finishing that I plan to do around joints but you get the idea.
Here are a couple mockup shots under the body with a 351C setting between the rails.
This is an interesting detail I discovered a long time ago. The spacing for the shift towers on the 1/24th scale Monogram Glidden Lenco is identical to the spacing of the 1/25th scale Revell pro sportsman chassis. Who'd have figured that?
Posted 05 September 2012 - 06:16 PM
Posted 06 September 2012 - 12:29 PM
Posted 06 September 2012 - 02:35 PM
Posted 06 September 2012 - 05:44 PM
Niko - I appreciate your comments. I'm trying to do this as cleanly as I can. It still doesn't measure up to the work that many builders on here do, but it's where I'm at currently.
Hey Tyrone - thanks much bro. It's very much appreciated. I've admired the work you do on all your builds, so it means a lot...
Thanks Dave. Slow progress, but it's getting there. Thanks for your comment about my 351C. Lots of guys these days don't appreciate the "C" engine for it's role in Ford's success in the 70s and early 80s. BTW, I'm going to draw up some lower strut arm mounts. I think your suggestion is a keeper!
Thanks Todd. I know where you're coming from, but I've been a Cleveland fan since they first showed up in Ford Pro Stock, Modified and Comp classes back in the 70s, plus I own a 1:1 Cleveland, so I have an allegiance to them...
Edited by futurattraction, 07 September 2012 - 07:29 AM.
Posted 09 September 2012 - 03:25 AM