long shot probably
Posted 08 December 2012 - 07:17 PM
Posted 08 December 2012 - 09:37 PM
The DOH kit was based on a Dodge Daytona racer. It was a later body style, though.
Edited by lordairgtar, 08 December 2012 - 09:39 PM.
Posted 09 December 2012 - 03:12 AM
Yep . This is my own conversion , but Resin Motor Replicas makes a kit with the nose , wing , and fender scoops for $25 .
Edited by TooOld, 09 December 2012 - 03:22 AM.
Posted 09 December 2012 - 08:29 AM
Posted 09 December 2012 - 10:18 AM
What did you do about the window plug ?
I cut out that section of the body and used sheet styrene to make a plug .
Is the off set in the engine block supposed to be there or is that from age of the molds
The engine in mine is centered in the chassis . Or are you talking about the engine itself ? The driver side cylinder head is slightly forward of the passenger side .
Posted 09 December 2012 - 10:40 AM
Posted 09 December 2012 - 02:57 PM
Christopher , I checked a new DOH kit and two Street Charger kits and they are all the same . I had to remove the alignment pins to assemble the halves of my engine block , and the rear is too long on the drivers side . It needs to be filed down till it is flush so that the rear plate and bellhousing will mount properly . In the two photos , the black engine block is the new DOH and the white primered one is an old DOH block . I know I did some sanding on the old one but it wasn't as bad as the new ones are . Just make sure the front is flush as shown so the cylinder heads and intake manifold will fit properly .
Posted 09 December 2012 - 08:11 PM
Posted 10 December 2012 - 05:41 AM
Looks like basic model building to me. Gotta do your research.
Posted 10 December 2012 - 07:18 AM