One of my peeves about this kit is how thin the motor appears. I know the SBF is a smaller motor but this little cobra kit has a 289 on a diet! So, I glued both motor halves to a thicker piece of plastic to give it some bulk.
I noticed the oil pan did not match the racing ones utilized so I grabbed some exoxy putty and went to town on the kit supplied one.
I also started doing some other work like smoothing the chassis, removing seam lines and filing these springs to look more presentable.
I also started working on cleaning up the body. This is an older kit designed in the '60s and it shows its age in some places. I added the rear fender flares but have not added the fronts yet. I glued in a thin filler in the door spaces to create the door sills but decided not to cut it to minimize chassis flex. Here is the fender flares and the intial shaping. I'll let the putty cure a while longer then sand them to their final shape.
Since I widened the engine, I would have to source a new intake manifold or modify the kit one. Comapring the kit and parts box units I had to the actual hardware on the 1:1, I decided to scratch one up as the available ones look downright tragic. I also grabbed a parts box water pump/front cover to replace the anemic kit supplied one though I did use the kit one as a spacer and timing cover. I have also sourced a thicker set of valve covers to replace the anemic ones from the kit. The intake and oil pan are not complete as they need details, flanges, water necks and such but you get the idea from the pictures of what they will eventually look like.
I plan to use the Goodyear Blue Streaks with Parts Pack Halibrands and some white metal knock-offs I found. The rear wheels will be deepened. I have also cut the half-shafts off the rear end and replaced them with a pair out of a parts Vette. I don't plan to go total nuts on this kit, just want to make it look much better and maybe raise a few eyebrows.
Thanks for looking and please let me know if you see any mistakes I am making before they get too far... I done a lot of research but somethings are just hard to find reference for.
Edited by torinobradley, 20 November 2012 - 06:11 PM.