truckabilly Posted May 8, 2014 Author Share Posted May 8, 2014 I guess I´ve just killed this project. I forgot to paint the yellow stripe beforehand, so I did over the red coat. I had to run the masking tape over the rivets and other surface details and decals. I was afraid of bleeding colour under the masking tape. So, the first layer was clear. Then the white base to kill the red. And finally the yellow. Unfortunatelly, I´ve never done this before and when I peeled the tape off, I got this: I should have used decal instead. Now, I don´t know. I don´t think I´m able to fix it unless I strip the coat completely off. Suggestions are welcome. Quote Link to comment Share on other sites More sharing options...
Bowtienutz Posted May 8, 2014 Share Posted May 8, 2014 try taking some wax or rubbing compound to the area with a fine tipped swabbed. They are made just for this purpose but if you done have them try making some by cutting a swab down with an Xacto knife take your time. I've rubbed out worse than that before Quote Link to comment Share on other sites More sharing options...
kilrathy10 Posted May 8, 2014 Share Posted May 8, 2014 Very nice looking work.....Definitely, a lot of kit.....I've thought about purchasing one of these, but never did....I just might have to break down and get one.... Quote Link to comment Share on other sites More sharing options...
Dave Van Posted May 8, 2014 Share Posted May 8, 2014 To be honest the yellow just looks like world weary paint that has been hastily repair a number of times!!! I have yet to start mine....the kit is intimidating! Quote Link to comment Share on other sites More sharing options...
Trucker_tim Posted May 8, 2014 Share Posted May 8, 2014 How did you get your PE parts are you in the states or over seas. Looks like a great job by the way. Quote Link to comment Share on other sites More sharing options...
truckabilly Posted May 8, 2014 Author Share Posted May 8, 2014 Tim, I am in the middle of Europe, in the Czech Republic. The home country of CTM, the Czech Truck Model Team. They produce and sell these PE parts. You can order straight from them or through the Model Maker Shop. Quote Link to comment Share on other sites More sharing options...
Trucker_tim Posted May 9, 2014 Share Posted May 9, 2014 Thanks I have started on the kit but was interested in the PE parts. Just didn't know how to get my hands on them Quote Link to comment Share on other sites More sharing options...
Old Albion Posted May 10, 2014 Share Posted May 10, 2014 Jarda, Before you strip all the paint off and start again. Have you considered getting some yellow stripes from Microscale Details www.microscale.com These would cover all the imperfections in the yellow paint and give a very crisp fine edge to the yellow stripe. I have started using their stripes on many of my builds, the quality is excellent. By the way excellent work so far! Quote Link to comment Share on other sites More sharing options...
Trucker_tim Posted May 10, 2014 Share Posted May 10, 2014 Hey Truck I was looking over the modelmakershop all I can find are the floor boards Quote Link to comment Share on other sites More sharing options...
Trucker_tim Posted May 10, 2014 Share Posted May 10, 2014 Just e-mailed with the Czech guys will be placing an order soon Quote Link to comment Share on other sites More sharing options...
truckabilly Posted July 5, 2014 Author Share Posted July 5, 2014 Thanks for your tips. I stripped off the yellow stripes and replaced them by decals. The edges are straight now but the decals do not cover the mess I left underneath them. I added yet another layer to make it look a little better. I hope it´ll be okay after weathering. I attached the body panels to the skeleton and it finally starts looking like a bus. I replaced the kit grab handles on both decks by pieces of stainless wire cut to length. My alclad chrome just didn´t look too well. Here is the upper deck with the original handles cut off. A peep look to the lower deck. I´ll be back in a minute... Quote Link to comment Share on other sites More sharing options...
truckabilly Posted July 5, 2014 Author Share Posted July 5, 2014 With the front upper part having the PE grille I had to paint the area behind it black real quick. The commercials on the sides was another challenge. First I wanted to cut the decals to smaller pieces and apply them one by one. But then I changed my mind and placed them as a whole. The crackers worked pretty well but the museum gave some hard times. The decal was slightly bigger then the area it was supposed to squeeze in. There were too many air bubbles trapped in. So I took a needle and jabbed the air pockets one by one to release the air and then I brushed the whole decal with hypersol which is one of the magic liquids to help set the decal and copy all the surface details like panel joints, grooves, rivets and such. The roof is just resting on top. I have to make up my mind if I should cement it and strengthen the body or just snap it in. Quote Link to comment Share on other sites More sharing options...
David G. Posted July 5, 2014 Share Posted July 5, 2014 Impressive work! I admire your dedication. David G. Quote Link to comment Share on other sites More sharing options...
Petetrucker07 Posted July 5, 2014 Share Posted July 5, 2014 This just amazing, this is awesome. The detail, the paint, the weathering, im in aww. Truly beautiful work. You have skill there bud. Cant wait to see it done Quote Link to comment Share on other sites More sharing options...
slusher Posted July 7, 2014 Share Posted July 7, 2014 Fantastic model. Excellent detail. Looks like a very tuff model to build..... Quote Link to comment Share on other sites More sharing options...
tbill Posted July 8, 2014 Share Posted July 8, 2014 remember looking at this awhile back, unbelievable work so far, just outstanding! Quote Link to comment Share on other sites More sharing options...
Pavel A. Posted July 8, 2014 Share Posted July 8, 2014 Jarda, your another excellent build. Great. Quote Link to comment Share on other sites More sharing options...
Tesla Posted July 8, 2014 Share Posted July 8, 2014 There's so many details with this build...you bring modeling to a new level...beautiful!!! Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted July 8, 2014 Share Posted July 8, 2014 This is a very cool build. I did check and one of those will fit on the top shelf in my display case! I'm waiting until I see one at a show at a decent price. Eventually someone who bought one new will get tired of that huge box banging around in their model collection! Quote Link to comment Share on other sites More sharing options...
Jairus Posted July 9, 2014 Share Posted July 9, 2014 Excellent build and nice weathering. Infact, I like the fact that you choose light weathering. The company prides themselves in keeping the busses clean and in good working order. That said... now you need some people inside. Quote Link to comment Share on other sites More sharing options...
kilrathy10 Posted July 9, 2014 Share Posted July 9, 2014 Very nice....Great job on this one, Man....Excellent..... Quote Link to comment Share on other sites More sharing options...
truckabilly Posted July 11, 2014 Author Share Posted July 11, 2014 Thank you all very much for your comments. I was satisfied with the way the outter parts of the body fit and match their counterparts. But, there was a gap between two panels in the back. I tried to pretend it is not there but you know how that usually ends. The gap seemed to be wider and wider each time it cought my eye. So, I took a scrap plastic, the putty and fixed the son of a BEEP. The white line is a polishing compound residue. It´s all gone at the moment. The repair is not perfect but I hope the weathering will help some. Quote Link to comment Share on other sites More sharing options...
kgvarrato Posted July 11, 2014 Share Posted July 11, 2014 Awesome build I really like what you did! Quote Link to comment Share on other sites More sharing options...
Volvoman Posted July 11, 2014 Share Posted July 11, 2014 Just read through your thread and I am stunned by your build. Your detailing is amazing and having built one of these without the PE detailing, im impressed with all the extra work that you put into yours!! Not wanting to hijack your thread but this is my one... Mine is pretty much built as a showpiece or maybe one that's been restored, I tend to shy away from weathering my models for fear of overdoing it but you have pulled yours of just right!! Again, excellent job, you should be proud!! Quote Link to comment Share on other sites More sharing options...
DumpyDan Posted July 16, 2014 Share Posted July 16, 2014 Wow, I have this kit for almost 2 years now. The job you have done in nothing short of amazing, it turned out beautiful. Gets me thinking, but can I do it justice like you have. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.