gasser59 Posted August 4, 2013 Share Posted August 4, 2013 (edited) A friend of mine was the Advance Scout for the Airstream Caravan that traveled from Capetown, South Africa to Cairo, Egypt in 1959. Wally Byam, the founder of Airstream travel trailers, undertook a never-before-attempted feat of a caravan of over 100 people from ages 4 to 80 on a caravan of the Dark Continent in 1959. Often times, there weren't any roads, Wally's gold colored Airstream trailer had a military escort through one of the countries because the natives thought it was actual gold, vehicles would have three and four flat tires a day, not to mention other more severe breakdowns such as broken axles. The stories go on and on. Â My friend, PeeWee, is Wally's nephew and was hired by Wally to be one of the two advanced scouts for this extended caravan. Wally bought two 1959 Chevy Apache, six cylinder, 4WD trucks without the truck bed and shipped them to the Airstream factory for the camper to be custom made to fit on the back. One truck was for the two advance scouts and the other was for the mechanic who also traveled with the caravan. Â This is such a fascinating story and one I'd like to tell by building a replica of of PeeWee's living quarters for over 10 months while traveling the African continent in 1959. Â Here are a few photos of the truck and the reference material I have been given from PeeWee. Â Here's the truck waiting to be loaded onto the ship. Â Being hoisted onto the ship, headed for Capetown. [http://i437.photobucket.com/albums/qq96/flyfshr/Scale%20Auto%20Builds/Scout%20Truck/Airborn_zpsd625c1f1.jpg] Â Here Peewee is playing music with a battery powered record player for the African native children. Â Peewee is sporting his new on-the-road haircut given by one of the Caravanners along side the Scout Truck. Â I've started with two of the AMT mid-50's pickups because I needed to lengthen the chassis and needed another drive axle for the front to make it 4WD. Also have the '58 Chevy cab from Modelhaus which is very well done. Thanks for your interest and any comments. Edited January 16, 2019 by gasser59 Fix brackets for photos. Quote Link to comment Share on other sites More sharing options...
gasser59 Posted August 4, 2013 Author Share Posted August 4, 2013 OK, so why didn't the photos show up? I followed the same procedures I've done hundred's of times. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted August 5, 2013 Share Posted August 5, 2013 This looks like the start of a very cool project. I remember reading an article about the Caravan, maybe it was in National Geographic of the era? I'll be watching. Quote Link to comment Share on other sites More sharing options...
RodneyBad Posted August 5, 2013 Share Posted August 5, 2013 Here ya go Fantastic Build.. Quote Link to comment Share on other sites More sharing options...
gasser59 Posted August 5, 2013 Author Share Posted August 5, 2013 Thanks Tom. Yes it was in a National Geographic because it was a Nat'l Geographic photographer that went along on the trip. Quote Link to comment Share on other sites More sharing options...
gasser59 Posted August 5, 2013 Author Share Posted August 5, 2013 (edited) Thanks Rodney. Funny you should post those pictures. I build that for PeeWee a few years ago and its what got me back into the hobby. I used the incorrect year for the cab since I didn't know a correct resin one was available. This one's going to get rivets from Scale Hardware so they won't be so big. The aluminum was from a roll of flashing from one of the big box stores. This one I'll be keeping for myself. Edited August 5, 2013 by gasser59 Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted August 5, 2013 Share Posted August 5, 2013 Very interesting! will be watching also!! Quote Link to comment Share on other sites More sharing options...
southpier Posted August 5, 2013 Share Posted August 5, 2013 too cool. please post pictures of the process. thanks Quote Link to comment Share on other sites More sharing options...
James2 Posted August 5, 2013 Share Posted August 5, 2013 Great subject, great story, great model! Quote Link to comment Share on other sites More sharing options...
ChrisR Posted August 5, 2013 Share Posted August 5, 2013 Great build! Quote Link to comment Share on other sites More sharing options...
alanr Posted August 7, 2013 Share Posted August 7, 2013 beautifull Quote Link to comment Share on other sites More sharing options...
Davewilly Posted August 7, 2013 Share Posted August 7, 2013 Very cool! Quote Link to comment Share on other sites More sharing options...
gasser59 Posted August 12, 2013 Author Share Posted August 12, 2013 A bunch of bench time in this weekend and was able to get the chassis extended, axle height adjusted/mounted and rear shocks made and installed. Its currently sitting on four wheels although the front axle needs to made to steer. This chassis is a combination of three chassis from the same kit. Here's a couple of pictures. This shows an original frame next to the 'adjusted' one. Here's the aluminum tubing shocks and showing a bit of putty yet to be sanded. Next is to work on the functioning steering on the front axle. Comments welcome and thanks for your interest. Quote Link to comment Share on other sites More sharing options...
Mooneyzs Posted August 16, 2013 Share Posted August 16, 2013 Brad.... Am excited to see another build on your bench. This I'd looking great so far. Nice work on the chassis. Looking forward to more. Quote Link to comment Share on other sites More sharing options...
crazyrichard Posted August 16, 2013 Share Posted August 16, 2013 thats awsome Quote Link to comment Share on other sites More sharing options...
Wonderbread Kustomz Posted August 16, 2013 Share Posted August 16, 2013 Wow! Very cool! Quote Link to comment Share on other sites More sharing options...
Sixties Sam Posted August 17, 2013 Share Posted August 17, 2013 Very unique and cool! Looks like a tough but fun project! Sam Quote Link to comment Share on other sites More sharing options...
gasser59 Posted August 18, 2013 Author Share Posted August 18, 2013 (edited) Thanks for your comments guys. They're really appriciated. Got the front shocks done and mounted as well as the U bolts. Now I need to find a Chevy in-line 6 cylinder that'll fit the engine bay as the one I have from the '53 Chevy is too large and would require moving the firewall back and that's not something I really want to do. The holdup on finishing up the frame is where and how to mount the transfer case and that is held up on sourcing the engine. Pix of the front axle later today. Its yard work time before the temps get unbearable outside. Edited August 18, 2013 by gasser59 Quote Link to comment Share on other sites More sharing options...
Danno Posted August 19, 2013 Share Posted August 19, 2013 Attn. Mr. Brad: Your order for a Chevrolet inline 6-cylinder vintage '58-'60 has been processed by the Danno Midnight Miniature Auto Supply Fulfillment Center and is ready for shipment via the next route truck to your neighborhood. Stand by for prompt delivery. Quote Link to comment Share on other sites More sharing options...
gasser59 Posted August 19, 2013 Author Share Posted August 19, 2013 That's awesome Danno and delivery too. I just wonder what I can repay you with? Quote Link to comment Share on other sites More sharing options...
Danno Posted August 19, 2013 Share Posted August 19, 2013 That's awesome Danno and delivery too. I just wonder what I can repay you with? Not to worry. Quote Link to comment Share on other sites More sharing options...
S. Svendsen Posted August 22, 2013 Share Posted August 22, 2013 Wow. That is really cool. Quote Link to comment Share on other sites More sharing options...
gasser59 Posted August 22, 2013 Author Share Posted August 22, 2013 Thanks Sven - glad you've tuned in. Quote Link to comment Share on other sites More sharing options...
gasser59 Posted August 28, 2013 Author Share Posted August 28, 2013 (edited) Although I don't have any photos to share at the moment, I have picked up a new smaller 6 cylinder from Danno that actually fits the stock engine bay and its got a coat of paint and dullcoat. I always wear the paint off when I handle them to wire and plumb them. Photos to follow when I get a bit more done. Edited December 31, 2013 by gasser59 Quote Link to comment Share on other sites More sharing options...
gasser59 Posted September 3, 2013 Author Share Posted September 3, 2013 (edited) Finally a bunch of concentrated bench time this three day weekend. Got the replacement engine plumbed and wired with still a few items left to do on it. The pictures don't show the Chevy Hugger Orange very well and wants to turn the color either pink or magenta. I can assure you its not either of those colors. For the belt, I cut the molded in one with the pulleys as one piece and notched the pulleys by turning them with my Dremel Stylus. I then made a belt out of black hollow insulation and used a small piece of wire for connecting the two ends together. Quite simple actually and looks so much better. Also got the transfer case done up and mounted and still need to get the functioning steering done up before painting the chassis. Here's a few pics of the engine. Thanks for your inteest and following along. Comments welcome. Edited December 6, 2013 by gasser59 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.