Jump to content
Model Cars Magazine Forum

oldschool

Members
  • Posts

    56
  • Joined

  • Last visited

About oldschool

  • Birthday 06/22/1964

Previous Fields

  • Scale I Build
    1/24 and 1/8

Profile Information

  • Full Name
    Lars Qvarfordt

oldschool's Achievements

MCM Regular

MCM Regular (3/6)

  1. Hi Frank I´ll used 1,5 mm plasticard for the windshield frame. First I did a template in cardboard, used this template on a plasticard and carefully sanded down the outer edges to a nice fit, then I used a drill bit to take out the inner areas and just leaving the frame. Carefully sanded to shape. Had to do a lot's of dry fit to check the frame against the window opening. /Larsa
  2. Almost forgot the Roadster I started with it´s started with a 1976 black edition with the new Flattie,Duvall wind shield,New head liugths from Big Jim and the Pontiac tail lights from the Big -T.
  3. No This started as a five window Coupe from Mike Gradis. I got an second quality casting and had to replace the hole body so I took a roadster and with some (plastic) surgery It was in place, then the top chop was done and I´ll had to section it to get the right to. So would I do it again? yep I´ll do it again but this time with the 3 window Coupe witch is coming my way any day now. Lars
  4. Hi I´m almost done with this Coupe now, so just a few sessions left Before it´s finished. Then I can restart the B400 build again. Hope u like it. Larsa
  5. The Red Coupe is almost finished and an update with pics coming this way. Regards Larsa
  6. Merry Christmas fellows Not sure that this would be moulded and casted.We are just to few building in the big scale.So this will be just one off. Regards LarsaQ
  7. No problems at all Just got some primer on the body this day and I´m pleased to see that there´s just not to much to fix from this stage so my attention will go to the frame for the moment and let the body rest for some days. Hope u like it. LarsaQ
  8. Hi Yes I know the TDR stuff and I like them a lot. I have some motors from Lindbergs so I just will take one off those. Regards Larsa
  9. Hi I´m not sure yet but thinking the Ford engine from Lindbergs Tall -T with a new intake manifold, four barell. Have to fix the manifold myself, having no idea if there´s one on the market. Regards Larsa
  10. I really like this build and having the box on the shelf, so this is a good inspiration source. Thnks LarsaQ
  11. Hi folks Still working on the B400 body and now the roof is almost finish just some detail to fix in the rear end where the body meets the fuel tank. So, next thing will be a thin coat off primer and a windshield frame will be made from plastic card. Regards LarsaQ
  12. Hi Yep the Flintstone i darn nice and I´ll sell this 25 scale body when I´m done with it. I used a rounded section from the headlights and back from the front of the Jaguar fenders for the curved back quarters. My sample of the Jag was coloured yellow, you can see the back corners off the body in this pic where the primer is sanded off. Here´s what's left off the fender. I did this so I had the same curvature on both corner. LarsaQ
  13. No sir it´s 1/8 and the start is a Revell build with a home fixed body. Regards LarsaQ
×
×
  • Create New...