Rign14 Posted August 24, 2014 Share Posted August 24, 2014 I have a K100 aero cab, will it mount to the 123 chassis? The Cat 3406 that comes in the snap pete and KW kits, are they decent and can they be somewhat easily fitted into non snap trucks? Thanks Quote Link to comment Share on other sites More sharing options...
olsbooks Posted August 24, 2014 Share Posted August 24, 2014 (edited) Just a thought..... If you got the complete snap KW chassis, you should be able to drop the aerodyne cab on it with a bit of frame grafting. Try using the frame from the front suspension to bumper (to get the hinge mounts and proper frame shape) from the K123 and the drive train and remainder of a KW snap frame kit. The differences between the K100 and K123 cab hinge mounts front frame rails I would not think (read between the lines on that one) SHOULD be real close. This method worked pretty well for me on a junk box slap together build. (check the workbench and under glass sections Aero Astro for more details). Sorry I don't have access to it to get more pix. It is a snap KW W900 frame/drivetrain with front springs/frame from the AMT kit. It wont survive the rivet counters scrutiny but surely presents some options. Good luck! Edited May 9, 2018 by olsbooks Quote Link to comment Share on other sites More sharing options...
Aaronw Posted August 24, 2014 Share Posted August 24, 2014 (edited) I put the 3406 in an Italeri Ford LTL-9000. It has a few short comings detailwise due to the snap nature (mostly hollow areas and pegs), but was not hard to improve. It was a fairly easy swap for the Cummins that came in the kit. Edited August 25, 2014 by Aaronw Quote Link to comment Share on other sites More sharing options...
72 Charger Posted August 25, 2014 Share Posted August 25, 2014 Ive put a cummins from a revell pete in to a snap Kenworth fitted a treat Quote Link to comment Share on other sites More sharing options...
Guest Posted August 25, 2014 Share Posted August 25, 2014 Not sure how this thread qualifies as an "in progress" post, seems to me it should have been posted in the Truck Stop board... Quote Link to comment Share on other sites More sharing options...
Rign14 Posted August 27, 2014 Author Share Posted August 27, 2014 My Kenworth K100E work in progress, all I have is the cab and tube. Quote Link to comment Share on other sites More sharing options...
Old Buckaroo Posted August 27, 2014 Share Posted August 27, 2014 That is a nice looking cab. You should not have too much trouble mounting it. I have several Aero cabs that I plan on using the 123 chassis for. Seems to me there was no real differences in the frame except the length . But it has been several months since I looked at them . (pre move packing) Other then improving the tilt hinge and relocating the rear cab mount. I plan on using a piece of aluminum or brass tubing between the frame rails with pins for the tilt. Not prototypical but functional. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.