Ace-Garageguy Posted January 23, 2013 Share Posted January 23, 2013 Over on the 'kit review' forum, the news is out that the new Revell '32 Rat Roaster still has the standard Revell '32 dropped front tube-axle, the air-bagged Ford 9" rear, and disc brakes. Some guys are mentioning "maybe the aftermarket will step in with a dropped I-beam front axle" etc. It just so happens I've got almost everything needed to convert the Revell '32 frames into traditional cars...dropped front I-beam, dropped-and filled I-beam, split wishbones, hairpins, a buggy-spring rear-end swap including the correct Model A or T crossmember and springs to allow a quick-change to fit, etc., etc. etc... already mastered as a result of doing several builds like this... The hitch is that these things would be very fragile if done in the usual model-car casting resin. BUT, I have access to some 'engineering-grade' casting resins that I'm 98% certain would work. It will take some experimentation to get it right, but if there seems to be some serious interest... I've been toying with the idea of doing it anyway, to save me time having to bashscratchify parts for every build. Feedback, please. Quote Link to comment Share on other sites More sharing options...
Craig Irwin Posted January 23, 2013 Share Posted January 23, 2013 I be a buyer this spring (after the winter heat bills). Quote Link to comment Share on other sites More sharing options...
Ken McGuire Posted January 23, 2013 Share Posted January 23, 2013 Bill, I would be interested in your vintage parts. Quote Link to comment Share on other sites More sharing options...
jeffs396 Posted January 23, 2013 Share Posted January 23, 2013 Do it Bill, buyers will come! Quote Link to comment Share on other sites More sharing options...
Bernard Kron Posted January 23, 2013 Share Posted January 23, 2013 (edited) Sign me up, Bill. I don't mind building my own stuff, but parts beat labor every time! Also on my list for the Revell Deuce series. per my post over on TRaK are the following: 1) Louvered Hood to match the Revell louvered trunk from the 5 window. (The trunk lid is also available in resin from Ed @ Drag City) 2) The Rat Roaster reportedly doesn't come with hood sides so it;s time to re-pop louvered hood sides from the original roadster. These hood sides have straight lower edge for a proper fit up against the chassis rails. 3) Re-pops of the stock and smooth hood sides but with the straight lower edge for a proper highboy fit. 4) Limefire, ramhorn and high-performance tubular header sets for the SBC in the Rat Roaster, 5) A proper old school tuck and roll interior with a 40's/early 50's large bolster across the bench seat's back. 6) An up-top! Finally, note that Ron Royston over at Early Years Resin offers a conversion pack for the Revell Deuce rear end (see http://earlyyearsresin.webs.com/accessories.htm): `32 Frame Conversion Kit --#CCK32 - Converts `32 Revell Street Rod frame For use with Flathead & stock running gear. Kit has 2 rear spring cross members, Motor mount adapter and engine cover with mounts Edited January 23, 2013 by Bernard Kron Quote Link to comment Share on other sites More sharing options...
azers Posted January 23, 2013 Share Posted January 23, 2013 You cast it i would buy, great idea. Quote Link to comment Share on other sites More sharing options...
southpier Posted January 23, 2013 Share Posted January 23, 2013 let's dance! Quote Link to comment Share on other sites More sharing options...
Toner283 Posted January 23, 2013 Share Posted January 23, 2013 I'm very interested as well. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 23, 2013 Author Share Posted January 23, 2013 Check out Bernard Kron's post #248 over in the Rat Roaster review thread. He's got some pix of some good looking '32 traditonal stuff already in production from ThePartsBox.com. Quote Link to comment Share on other sites More sharing options...
doggie427 Posted January 23, 2013 Share Posted January 23, 2013 Always interested in vintage style parts , add me to the buyers list Bill ! Quote Link to comment Share on other sites More sharing options...
Draggon Posted January 23, 2013 Share Posted January 23, 2013 I would also be interested. Quote Link to comment Share on other sites More sharing options...
realgone58 Posted January 24, 2013 Share Posted January 24, 2013 I'd be interested too. Quote Link to comment Share on other sites More sharing options...
PatRedmond Posted January 24, 2013 Share Posted January 24, 2013 Yes, please Quote Link to comment Share on other sites More sharing options...
iBorg Posted January 24, 2013 Share Posted January 24, 2013 I think it comes down to price. At $8-10 you should sell several. At $25, I'll scratch build. Mike Quote Link to comment Share on other sites More sharing options...
peter31a Posted January 24, 2013 Share Posted January 24, 2013 I would be interested in the vintage stuff as well. There has been a need for awhile, well, basically since the roadster kit first came out. Quote Link to comment Share on other sites More sharing options...
misternemo Posted January 24, 2013 Share Posted January 24, 2013 i would be interested as well. Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted January 25, 2013 Share Posted January 25, 2013 Bill, would these parts allow me to build a rep-stock '32 using the Revell kits? I've always heard such nice things about them, but the whole rod thing doesn't really light my fire. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
DrKerry Posted January 25, 2013 Share Posted January 25, 2013 (edited) I could be interested as well. By the way, love the 32 Ford!!!! Edited January 25, 2013 by DrKerry Quote Link to comment Share on other sites More sharing options...
Lyle Willits Posted January 26, 2013 Share Posted January 26, 2013 Replicas & Miniatures Co. of Md. has had, for many years, most of the traditional parts you are looking for. Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted January 27, 2013 Share Posted January 27, 2013 Count me in. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 28, 2013 Author Share Posted January 28, 2013 Bill, would these parts allow me to build a rep-stock '32 using the Revell kits? I've always heard such nice things about them, but the whole rod thing doesn't really light my fire. Charlie Larkin What I've got mastered so far is hot-rod stuff but I can come up with stock front / rear ends without too much difficulty. I'm looking into how much stuff I'd need to do to make parts mix-and-match with each other and fit the Revell bits as well. Replicas & Miniatures Co. of Md. has had, for many years, most of the traditional parts you are looking for. I'll need to look at their product line and see where the gaps are, if any. I'm thinking a couple different front axles with several drops, hairpins, split-wishbones in a couple of styles, and multiple rear ends...maybe 2 styles of quick-change, a stocker (they'd all use the same axle bells), and a Columbia, plus '39 style juice brakes and stock style mechanical backing plates too. Most of this stuff is already available from old kits, but it all takes work to fit it to the Revell chassis correctly. I'm thinking of a complete chassis as well, with a separate K-member, 2 rear crossmember options and 2 front crossmember options. Really need to check R&M though before getting too carried away. It's a good bit of work to make it happen, and if R&M already has the market covered, there's no point in me duplicating their effort. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 28, 2013 Author Share Posted January 28, 2013 (edited) Trying to follow through on this, sent an email. Also have this contact info: Replicas & Miniatures Co of Maryland 317 Roosevelt Avenue S.W, Glen Burnie, MD 21061410-768-3648 replmincomd@aol.com How is the timeliness usually of email replies from this company? I understand from multiple sources that the products are all first-rate. EDIT. ...and the answer is, I got a response within minutes. Wow. Unusual for anyone in business to answer that fast. Impressive. A catalog is now $5. We'll know in a few days exactly what IS already available to build traditional hot-rods. Edited January 28, 2013 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
styromaniac Posted January 29, 2013 Share Posted January 29, 2013 Norm Veber of Replicas & Miniatures of Maryland is a master of his craft & as nice a person as you will ever meet in this hobby. I've been buying his products for years..his nostalgic rodding & custom products are varied ( especially his flathead hop up items ) and his collaborations with other skilled builders like Rik Hoving know no equal. Quote Link to comment Share on other sites More sharing options...
blazefox Posted February 4, 2013 Share Posted February 4, 2013 dropped i beam axle? Quote Link to comment Share on other sites More sharing options...
Greg Myers Posted February 4, 2013 Share Posted February 4, 2013 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.