Danno Posted July 25, 2013 Share Posted July 25, 2013 In my small dehydrator (Nesco), I run about 95-100 degrees for styrene parts and bodies. I run it about 85 (lowest setting) for resin parts and bodies . . . too much more and resin can get soft. In my medium dehydrator (kitchen oven), the oven lamp only ~ no heating elements ~ gets the oven interior up to about 90 degrees. In my giant dehydrator (outdoors), it runs about 80-95 in the winter, 100-115 in the summer. Quote Link to comment Share on other sites More sharing options...
chev12olet Posted July 25, 2013 Author Share Posted July 25, 2013 "If it ain't broke, don't fix it." You so funny Square wheel and the round wheel we must move on bro like, well everything cant be slow..... I like to go FAST and a dehydrator is square, slow and outdated for my uses. That's why I asked my question man not for stupid responses lkke some. Quote Link to comment Share on other sites More sharing options...
CJ1971 Posted July 25, 2013 Share Posted July 25, 2013 I think the lowest setting on the average Nesco unit is around 85 degrees, adjustable upwards. Leave your parts in the unit until you can't smell any paint odor, which is usually only a few hours. I tend to ramp mine up to about 90 degrees or so. Thanks :-) Quote Link to comment Share on other sites More sharing options...
Harry P. Posted July 25, 2013 Share Posted July 25, 2013 You so funny Square wheel and the round wheel we must move on bro like, well everything cant be slow..... I like to go FAST and a dehydrator is square, slow and outdated for my uses. That's why I asked my question man not for stupid responses lkke some. Sorry if my response was "stupid"... I guess I need to try harder. I'm all for newer, better technology. But when you have something that is simple, foolproof, works perfectly, and is cheap and easily available on top of it... why try to "do better?" Quote Link to comment Share on other sites More sharing options...
mrknowetall Posted July 28, 2013 Share Posted July 28, 2013 Thanks :-) Oops! 95 degrees is the lowest setting, which is plenty warm enough. Here's what mine looks like with some rings added for height. Also a peek at the inside... Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted July 28, 2013 Share Posted July 28, 2013 "If it ain't broke, don't fix it." Luddite tendencies aside, now you understand why I shoot film. As to the main topic, if I want to spend things up or if it's humid, I use a hair-dryer. I don't have the space for a dehydrator right now, but it's on my get list once I have the space and money. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted July 28, 2013 Share Posted July 28, 2013 I'm all for newer, better technology. But when you have something that is simple, foolproof, works perfectly, and is cheap and easily available on top of it... why try to "do better?" Amen. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
chev12olet Posted July 29, 2013 Author Share Posted July 29, 2013 Sorry if my response was "stupid"... I guess I need to try harder. I'm all for newer, better technology. But when you have something that is simple, foolproof, works perfectly, and is cheap and easily available on top of it... why try to "do better?" Because that's human nature! Bigger is better advancement in technology is always better.That's why we are the #1 species man. Quote Link to comment Share on other sites More sharing options...
Dr. Cranky Posted July 29, 2013 Share Posted July 29, 2013 After I started using Donn Yost's method of cutting my enamels with cheap lacquer thinner (which brings down the drying time considerably to about 3 days), I feel like that's pretty fast. The other tip I picked up from the OLD MAN is simply to paint a sequence of bodies at the same time and then you will have plenty of models stored away for a rainy day. I also have dehydrator but lately I have not used it. I have a metal cabinet where I put all the painted models to dry over a period of 3 days, then the fun of sanding and buffing and polishing begins. I find that if I work only one model at a time, I stress out and tend to become extra/ultra impatient. Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted July 30, 2013 Share Posted July 30, 2013 I find that if I work only one model at a time, I stress out and tend to become extra/ultra impatient. I think there's a lot of truth in that, Doc. That's why so many of us tend to have a whole bunch of projects going at once, the impatience and resulting frustrations (or vice-versa) need to be contained or all your work will suffer. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.