Jump to content
Model Cars Magazine Forum

maysula

Members
  • Posts

    158
  • Joined

  • Last visited

Previous Fields

  • Are You Human?
    yes
  • Scale I Build
    1/12

Profile Information

  • Full Name
    Thomas Halvarsson

Recent Profile Visitors

5,770 profile views

maysula's Achievements

MCM Friend

MCM Friend (4/6)

  1. Stunning work! And a great display as Usual Tomasz 🙂
  2. Thanks all 🙂 And thanks John, glad you liked it ! The block is airbrushed with a classic color, Alu 56 Humbrol enamel, gives a nice matt finish I think. The gearbox is also painted with Humbrol metalcote , a mix with 003 and 004. The rest is mostly done with acrylics, some parts is painted with Alclad colors, body with Tamiya spraycan TS-15, floorpolish on top.
  3. Hi I did a coversion of Tamiyas Stewart Monaco GP car, there is only decals for Stewart in the kit. I used mainly decals from Schunko, tire decals is from Indycals. The main difference on Ceverts car is the rearview mirror support, extended glass part on the cowling. Also the coolingpipe in the lower side of the body is routed in another way at the engine. Added bolts ,screws and electrical stuff around the engine and on the dash. also added some parts around the engine that was not provided, my english is not so good so I can,t explain what it,s called in technical terms. I hope you understand and see for your self 🙂 . The front cooler has got new mounting support for the pipes. Thomas
  4. Great work ! Like the weathering very much , a very nice kit to build too.
  5. Wow! Like this very much 🙂 Looking forward to more pictures 🙂
  6. Thanks 🙂 I have a w.i.p. on this, I replaced a lot of plastic hexbolts to metal, screws in various places. Added braided lines with connectors, also wires hoses and such stuff in the interior and under the hood, engine and so. also some extra stuff on the chassi, uprights , exhaustsystem. Did some modification on the dash support to the floor, added the alu foil ( don´t know the english name for it )to the rear of the interior. and of course the 3D graveltires. I can highly recommend this kit ! Liked it alot 🙂
  7. This car had a 8V engine and the hood was flat, the kit has an 16V engine, it´s higher so the hood is raised in the middle. I belive the resin hood was only tested on the bodypart itself, not with the chassi mounted. The resin hood can only be mounted in a open position
  8. Thanks Marcus 🙂 I belive more yellow Deltas will come, also I think more liverys will come from the aftermarket to. My decalsheets was from 2 different makers, the Camels was very nice, but the Clarion had a 3D feeling, a litlle raised, and they was difficult to lay down smooth to the surface. maybe all of the decalsets are like this..
  9. Hi Now is my Swedish Delta finished. Conversion Decals from Reji, a resin hood and also a etch sheet was included. The hood itself looked very nice but doesn´t fit at all when the engine is installed. That hood is nearly flat and used for the 8V engine who was in this car. The Kit has the 16V engine , wich is much higher so the kits hood is higher in the middle. I bought 3D printed gravel tires , looked better than slicks for a winter rally 🙂 Painted with Tamiya TS-34 Camel yellow. The kit itself is very good and fun to build, the only problem I got was the bolts and nuts for the wheels , they didn´t match !? .Another builder have the same problem, hope Italeri fixed that now. I have a W.I.P on this forum also. Thomas
  10. Hi. Got the decalset for the car, also some etch parts and a new hood in resin. Unfortunatly my hood has "shrinked" just to small, I glued Plasticcard to the edges it was better but didn´t fit properly. When the hood was made it must have been tested to the bodypart only. with the body mounted to the chassi the engineparts are way to high so the hood is useless 😞 but the hood itself it looked very good. I have also added some more stuff in the rear of the interior. Thomas
  11. Hi Ricky. The extra bar you asked about is the jack for the wheels, I have modified it a little bit.
  12. Nice to this version Marcus ! I´m bulding this too. I can see that you didn´t use the resin hood from the Reji decals set. My hood was to "small" so I had to glue plasticcard on the sides and the back. but the fit is long way from perfect. Yes, it´s a very nice kit, no major problems , only my set of nuts and bolts for the wheels didn´t match. Thomas
×
×
  • Create New...