jw78z28 Posted February 4, 2013 Share Posted February 4, 2013 where can I find a nice big block ford motor needs to be 1/25 scale. I would like to fine one that has a hilborn inj set up aftermarket or on in a kit. Need two of them one for a gasser build & one for a street machine build, S/M doesn't have to be inj. would like one with a nice two carb set up. Thanks Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted February 5, 2013 Share Posted February 5, 2013 (edited) The old Revell 1/25 parts pack 427 Ford (FE engine) kit, available cheap on ebay, is a very nice rendition of one big-block. Parts are included to build 2 versions: either GMC 6-71blown/ injected, OR with 2 four-barrel carbs. Because the FE engine has even intake-port spacing, it's relatively easy to convert Hilborn injection or log manifolds made for other even-port-spacing engines. The Revell Ed Roth Mysterion kit has TWO Ford 406s (early FE, same general appearance as the 427) with different valve covers and intake manifolds for three 2-barrels. Edited February 5, 2013 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
Dan Helferich Posted February 5, 2013 Share Posted February 5, 2013 Bill's suggestion is a great one for a blown engine. There's an E Bay seller selling sets of 4 of these engines for $11.95 shipped. The AMT '60 Ford kit also has an excellent FE Ford and if you get the most recent issue it has 2 complete engines with 1x4, 2x4 & 3x2 carb setups. good luck in your search! Quote Link to comment Share on other sites More sharing options...
Cato Posted February 5, 2013 Share Posted February 5, 2013 (edited) Because the FE engine has even intake-port spacing, it's relatively easy to convert Hilborn injection or log manifolds made for other even-port-spacing engines. ...if you remember that the lower port sections of the intake are half the head. Edited February 5, 2013 by Cato Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted February 5, 2013 Share Posted February 5, 2013 (edited) ...if you remember that the lower port sections of the intake are half the head. ...absolutely, and if you cut the flanges off the 2X4 manifold and build the Hilborn setup on them... ...or a 6-carb log can be built on the 2X4 manirold filed flat in the center, and a log for something else filed flat on the bottom... Edited February 5, 2013 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
jw78z28 Posted February 5, 2013 Author Share Posted February 5, 2013 Thanks for the info guys. I think I have one of the parts pack ford motors looks like it time to dig for some parts Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.