Mike Posted March 3, 2007 Share Posted March 3, 2007 I built this last night. The total cost was $3.00 for a 24x36 piece of Elmers 1/4" foam board from Michaels, and .99 cents for a box of stick pins. Glue didn't hold the foam board well, so I used stick pins in pairs and pointed in an arrow shape towards one another about 1" apart. That held everything tight. I also shot the whole thing with a base coat of white primer to soften things up and take the glare away from the foam board. Lighting is the only thing to practice with now. Let me know what you all think. Test pictures with a model - Quote Link to comment Share on other sites More sharing options...
darquewanderer Posted March 4, 2007 Share Posted March 4, 2007 Actually Mike that's quite good. Now try experimenting with colored poster board clipped onto the walls to complement or contrast with the subject being shot. Quote Link to comment Share on other sites More sharing options...
m408 Posted July 15, 2007 Share Posted July 15, 2007 I built this last night. The total cost was $3.00 for a 24x36 piece of Elmers 1/4" foam board from Michaels, and .99 cents for a box of stick pins. Glue didn't hold the foam board well, so I used stick pins in pairs and pointed in an arrow shape towards one another about 1" apart. That held everything tight. I also shot the whole thing with a base coat of white primer to soften things up and take the glare away from the foam board. Lighting is the only thing to practice with now. Let me know what you all think. Test pictures with a model - Mike, Try strobist.blogspot.com Instructions for building a lightbox from a cardboard box and white tissue paper. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.