Greg Myers Posted March 5, 2015 Share Posted March 5, 2015 Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted March 5, 2015 Share Posted March 5, 2015 There was a resin of the Champ pickup years ago. I have one and realized that the master was a Johan Studebaker Lark cut behind the front seat. So this one would be fairly easy to create from that kit. Quote Link to comment Share on other sites More sharing options...
vintagercr Posted March 5, 2015 Share Posted March 5, 2015 I have one that I bought 2 years ago at NNL East. I can't think of the caster. They were there last year too. Quote Link to comment Share on other sites More sharing options...
vintagercr Posted March 5, 2015 Share Posted March 5, 2015 Tom, do you have a vendor list or a floor plan. They were just inside the door and along the same wall as Lone Wolf Painting. Steve Quote Link to comment Share on other sites More sharing options...
Atmobil Posted March 5, 2015 Share Posted March 5, 2015 What truck did Studebaker take the beds from? Was it Ford? Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted March 5, 2015 Share Posted March 5, 2015 Steve- Must've been RMR? They were next to Lone Wolf, next to the door into the photo booth room. On the other side of Lone Wolf was Tara Hobbies (display cases) and Don Banes (older kits) The one I have was done by STS back better than 15 years ago. Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted March 5, 2015 Share Posted March 5, 2015 http://www.rmrmodels.com/index.html Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted March 5, 2015 Share Posted March 5, 2015 What truck did Studebaker take the beds from? Was it Ford? The bed was from Dodge. I too would love to see a styrene model of a Studebaker Champ pickup. Scott Quote Link to comment Share on other sites More sharing options...
jbwelda Posted March 5, 2015 Share Posted March 5, 2015 that is a nice looking truck, count me in on wanting one jb Quote Link to comment Share on other sites More sharing options...
plastic trucker Posted March 5, 2015 Share Posted March 5, 2015 Frontier Resin Design has one on ebay sometimes. Quote Link to comment Share on other sites More sharing options...
Aaronw Posted March 6, 2015 Share Posted March 6, 2015 I saw one of those once and was surprised at how similar it was to the early Japanese pickups in size and style. I mistook it for an early Datsun at first.It makes one wonder what might have been if Studebaker had managed to survive another decade. They offered smaller economy cars well before they were popular, and probably would have been better prepared than the Big 3 to compete with the small fuel efficient imports that really gained sales after 1973. Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted March 6, 2015 Share Posted March 6, 2015 There is (was) a 1:25 plastic kit of one. It was released by Premiere in 1961. Good luck finding one today, though. Quote Link to comment Share on other sites More sharing options...
Art Anderson Posted March 6, 2015 Share Posted March 6, 2015 What truck did Studebaker take the beds from? Was it Ford? On the last series of Champ pickups, Studebaker used their long-running "flareside" (OK, call it a stepside if you will) box that had its debut in 1949, but for the Champ wide-bed pickups, they got their boxes from International Harvester (most likely from Ft Wayne IN). Art Quote Link to comment Share on other sites More sharing options...
vintagercr Posted March 6, 2015 Share Posted March 6, 2015 http://www.rmrmodels.com/index.html Yes they are the ones Quote Link to comment Share on other sites More sharing options...
pharoah Posted March 6, 2015 Share Posted March 6, 2015 This looks like a job for Moebius! Quote Link to comment Share on other sites More sharing options...
jbwelda Posted March 6, 2015 Share Posted March 6, 2015 Premier eh? based on reputation, I would say no thanks, but could you expand on what to expect from the kit? jb Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted March 6, 2015 Share Posted March 6, 2015 (edited) What truck did Studebaker take the beds from? Was it Ford? Just talked to my buddy that has one of these and he said it is a Dodge bed . He also has an International and says the beds are close but not the same. The big news for the 1961-model Champs was the optional availability of wide new slab-sided Spaceside P2 pickup boxes, which had previously been used on 1959-1960 Dodge Sweptside pickups. Studebaker purchased the dies and tooling for the 6½ and 8-foot P2 boxes from Chrysler, and designed a new front panel and a new tailgate stamped with the Studebaker name to go with them. The narrower 1956-60 P1 boxes remained standard equipment. Edited March 6, 2015 by 1930fordpickup Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted March 6, 2015 Share Posted March 6, 2015 Premier eh? based on reputation, I would say no thanks, but could you expand on what to expect from the kit? jb Well.... Right off the bat, it's a little bit smaller than 1:25. Not by much, but enough to drive you crazy if you tend to notice such things. Crude by today's standards, and maybe a little crude even by '61 standards, compared to other kits I've seen from that time period. Worst thing is the bed- for some reason, it has two semi-circular open notches at the front end, where it sits against the back of the cab. In it's favor, the basic shapes and features are right, but it'll take a little effort to get it to really look good, even if all you want is a curbside shelf model that will never meet an on-duty contest judge. All in all, I wouldn't say it's the worst kit I've ever seen, but it's pretty far from the best. I know a guy who has one he built back when it was new- I'll see if I can get pics. Seems like this kit is so obscure today there aren't even any good pictures of a built up example online. Quote Link to comment Share on other sites More sharing options...
jbwelda Posted March 6, 2015 Share Posted March 6, 2015 thanks Chuck, if you find the photos please do post them, even though chances of finding this kit at appropriate price seem pretty slim. by "appropriate" I mean in the range of maybe 20 - 30 dollars jb Quote Link to comment Share on other sites More sharing options...
Fabrux Posted March 6, 2015 Share Posted March 6, 2015 Worst thing is the bed- for some reason, it has two semi-circular open notches at the front end, where it sits against the back of the cab. My guess is those notches are for the side-mounted spare shown on the box art. No idea why they would mold both fenders that way, though. Quote Link to comment Share on other sites More sharing options...
johnbuzzed Posted March 6, 2015 Share Posted March 6, 2015 There is (was) a 1:25 plastic kit of one. It was released by Premiere in 1961. Good luck finding one today, though. I remember building one of those- it was my first model. I was 5. I always thought it was a Palmer kit. Quote Link to comment Share on other sites More sharing options...
Pete L. Posted March 6, 2015 Share Posted March 6, 2015 Gaute, I believe I recently read somewhere that Studebaker used Dodge truck beds towards the end of their production, maybe it was in Hemming's Classic Car Magazine. That's why the body lines of the cab and bed don't match up... Quote Link to comment Share on other sites More sharing options...
Mark Posted March 6, 2015 Share Posted March 6, 2015 I've got a Premier Lark sedan kit...like the pickup, it's smaller than 1/25 scale, just enough to be maddening. Quote Link to comment Share on other sites More sharing options...
Atmobil Posted March 6, 2015 Share Posted March 6, 2015 Yes, I see it now that it is a Dodge bed. Remember reading about them in a magazine some years ago and I did remember that they used a bed from another source but did not remember who. I do have a Hotwheels 1:64 diecast version of the Studebaker Champ but they have cheated and made a bed that flushes with the cab. This one is not mine but mine is the same color: Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted March 7, 2015 Share Posted March 7, 2015 (edited) On the last series of Champ pickups, Studebaker used their long-running "flareside" (OK, call it a stepside if you will) box that had its debut in 1949, but for the Champ wide-bed pickups, they got their boxes from International Harvester (most likely from Ft Wayne IN). Art No, sorry Art. The wide-bed boxes on the Studebakers came from Dodge. They were Sweepline box from the 1959 and '60 Dodge pickup. Scott Edited March 7, 2015 by unclescott58 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.