cobraman Posted June 16, 2014 Share Posted June 16, 2014 I am wondering if there is anything special I need to worry about when drilling a hole in resin. I have the Modelhaus Cheetah kit and want to drill out the gauges in the dash. I have worked with resin a few times but never drilled any. I know the resin is kind of brittle so thought I would ask first. Thanks. Quote Link to comment Share on other sites More sharing options...
jeffs396 Posted June 16, 2014 Share Posted June 16, 2014 I've had no problem with normal drill bits Ray, either turning by hand or with a drill motor... Quote Link to comment Share on other sites More sharing options...
Ramfins59 Posted June 16, 2014 Share Posted June 16, 2014 Ditto for what Jeff said. Quote Link to comment Share on other sites More sharing options...
cobraman Posted June 16, 2014 Author Share Posted June 16, 2014 Thanks guys. I will use my drill press and go slow and use a light touch. Quote Link to comment Share on other sites More sharing options...
Toner283 Posted June 16, 2014 Share Posted June 16, 2014 Use a nice sharp bit too. Quote Link to comment Share on other sites More sharing options...
crazyjim Posted June 16, 2014 Share Posted June 16, 2014 I always start with small bits and work up to larger sizes. Quote Link to comment Share on other sites More sharing options...
cobraman Posted June 16, 2014 Author Share Posted June 16, 2014 Thanks for the advise guys. Quote Link to comment Share on other sites More sharing options...
divotdude Posted June 19, 2014 Share Posted June 19, 2014 Start with a 1/16 bit first and slowly work your way up to the size you need. I usually drill the holes by holding the bit in my hand. I use Black and Decker bits with the 1/4 inch hex at the end. This allows you to grip the bit. Work the bit back and forth, don't force it. If you do use a drill, make sure that the speed is set on the lowest speed. Good luck, and happy modeling. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.