-
Posts
24 -
Joined
-
Last visited
Previous Fields
-
Scale I Build
1/25
airlessride's Achievements
MCM Member (2/6)
-
Well finally decided what to do to that 379 i had started a few months ago. Going for a Transfer dump but on the clean owner operator style, I got the ride height to how i want up front and the fenders to hover over the wheels much closer. For the boxes and trailer unit i want to go with reliance with the high sides. I have more sratchbuilt parts to go on and a bunch of chrome for the truck but for now the boxes and trailer is what im focusing on getting done first. I also have a bunch of Bill Drennen Parts to go on as well. Enjoy ~Blake Boxes arent yet to my liking so i started another pair unpictured but they are a little lower then the one pictured. Still gotta shorten and box the frame
-
REAL ALUMINUM TRUCK WHEELS!!!!!!
airlessride replied to Ben's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
PM Sent Ben. These would be awesome with my 351 Project's -
Thanks for the Great comments guys, Got some work done not much though I did a little detailing on the fenders so that way when i paint the white stripe i have a better guide. i used half round from ever green. i did place a order from aitm for a set of his kenworth battery boxes since the kit box was a little boxy for my liking. Enjoy Blake Hopefully this upcoming week i'll have more time.
-
I'll have a go at this, Heres my movin on KW I'll be building not to movie spec mostly box stock except for a few add on's and i will have a Box van to with it. First mock up after straightening frame Scratchbuilt step box on passanger side
-
Well took a break from my 351's and decided to Go ahead and start on this one i had it listed on the trade add but i kinda had a hard time letting go so i figured i'd save it. The kit was basically a mild build up that started with the frame which when i got it was very tweak so i had heated it up with my heat gun and bent it to where i could get all wheels on the ground and the frame level. The hood had both front headlight housings crack to i heated those up as well and glued them into place. The cab also has some problems like the lower portion on the drivers side had a chunck missing from the cab which i fixed and primed. i did Scratchbuild another side step box for the passanger as i didnt like the look of the single fuel tank. i also managed to lower the front end on it so i wouldnt have a big gap which i dont like about the AMT Kits, Stacks will be with K&S Tubing. With this build i wasnt gonna make a exact replica more of a box stock build besides a few add on's Later i'll build both the in tandem truck and the truck later used in the series. Enjoy ~Blake Color will be Standox dark variant Pearl green metallic
-
Cummins KTA-600 Engine Kit 1/25 Scale
airlessride replied to Porky's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
Really nice work Eric!!!! -
Project 351 pete narrow nose
airlessride replied to airlessride's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
Thanks guys, First coat of really reduced Standox polyester filler prime put down yesterday i did get a chance to block it out a little tonight which turned out pretty good. Waiting on my rivets from scalehardware.com to continue more work. Thniking of paitning it a bright red to go along my double trailmobile trailers. -
Rebuilder KW
airlessride replied to mackinac359's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
Very nice Tim, Clean and simple. ~Blake -
Project 351 pete narrow nose
airlessride replied to airlessride's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
Well ive taken a little break from building since ive been pretty busy with work and such also cause i was getting a little jerked about certain things on the truck wasnt turning out to how i had wanted but, Im back and with a fresh mind to start again . I primed the hood once to see what more i needed to do, i plan to skim coat the hood 1 last time to get everything straight and crisp then i'll resribe the hood lines and add some round evergreen to define the center of the hood. The grille is a mess around i wanted to give it the open shutter which still needs work if it doesnt pan out i'll go back to my first look i had planned Fenders i added half round evergreen to the edges but i left the fenders a little short up front but i think i can live with that. i finished the inner fender step just need to mount it on. The cab i manage to get the drip rail and rear window to the shape i want now its time for filler. Its no where near perfect like the work you guys do although i am pretty pleased of how its turning out. I do Believe now i no what to expect and how to go about when i build my next few 351's Have a great weekend ~Blake -
Project 351 pete narrow nose
airlessride replied to airlessride's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
my little inspiration -
Project 351 pete narrow nose
airlessride replied to airlessride's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
Hey Scott I cant thank you enough for all the pic's you've taken thats realy gonna help me out for the little details. yeah i see that now that you've mentioned it. i still need to cut the angle at the lower edges of the grille, and trim the inner fender area. i hope when i do the front will sit a little lower. Thanks for the pic's Scott Hey Johnny, i took the original grille fron the california hauler Trimmed the tops and sides and cut to size to fit into my radiator shell. Still need to putty the joints but works out pretty well. ~Blake -
Project 351 pete narrow nose
airlessride replied to airlessride's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
Takin a little shape shutters in just need to putty up the joint also got the rad cap going. Anyone no a good place to get scale size rivets? -
Project 351 pete narrow nose
airlessride replied to airlessride's topic in WIP: Model Trucks: Big Rigs and Heavy Equipment
Not to much done today but i did get a little time into it. Got the roof drip rails made of thin copper wire instead of the brass but it worked out pretty well slight adjusting and i'll be happy got the rear early style window complete just need to install it onto the cab. Fenders im still working with as i made up another set on the side. ~Blake