Jump to content
Model Cars Magazine Forum

cobain86

Members
  • Posts

    13
  • Joined

  • Last visited

Previous Fields

  • Scale I Build
    1:25

Profile Information

  • Full Name
    Steven Danz

cobain86's Achievements

MCM Member

MCM Member (2/6)

  1. DONE! Hope you like it. had some problems on the windshield but looks ok.
  2. thanks!! if you spray the createx pearl color, it drys satin flat. i sprayed it with my evolution 2in1 and the 0,4 Nossle. No thinning! so here are the latest pictures so far. Now i have to Sand and Polish the car and put some Bare Metal Foil on it! The Color Reminds me of Reese's Peanut Butter Cups. Maybe i should bring a decal on it.
  3. So after a few sanding and polishing sessions, here is the Result
  4. now some 2k Clear(i used mipa 2k) and the interieur The color is ok but not what i expected. I was looking for a sparkling color, but its hard to get good colors here in germany!
  5. So here is my new project! i tried to get those coral color but it doesnt work. So i bought some Peal Orange(Tangerine) and Pearl Black from createx an here is the result
  6. soo after a few weeks i was set sanding the whole car and tried to put some 2k gloss clear on it. but that was a failure. i used dupliColor Cars 2k Clear and the clear coat got some cracks :/
  7. and now the small parts. I was using Chrome silver and brown for the rust effect
  8. Hi I'm Steven and i*m new here!! So this is my first Projekt with a different Design. I`m using Tamiya and ModelMaster Acryl colors. Also the Tamiya X22 Clear Coat(not good). The first step was to wet sanding and prime the body. After that a coat shining white (tamiya X2) Now the Stripes(i`m using tesa precision tape!) Now the Red Coat (ModelMaster) And after removing the tape - Wet sanding again I had no masking tape so i couldn`t use the fire deisgn! so i made it simple! Tamiya Blue and Tamiya White for the Stars No a few coats clear and BareMetal Foil then i`m done. I`m happy for any tips and comments! Thank you!
×
×
  • Create New...