vintagestang Posted April 11, 2012 Share Posted April 11, 2012 I want to build a service station diorama. I will probably get my styrene from Evergreen. What should I use for walls to put the metal siding on? How far apart and how thick should the siding be? Where can I get a pre-made 1/25th scale gas pump (preferrably Shell or Exxon)? How do I make hinges for the door? I will get the tool set from ModelRoundup. And what else do I need to know in general about building dioramas? I have never built one before. And I read Dr. Crankys thread on his diorama too. Quote Link to comment Share on other sites More sharing options...
Grumpa Posted April 11, 2012 Share Posted April 11, 2012 Patrick I would start by looking around your home town or within five or ten miles outside of town to find some of your inspiration. I've used "FOTKI" as you can type in "Old gas stations" in their search and get a ton of photos to look at. Most service stations from around the thirties forward were built of cinder blocks. so the width of one of these in scale would be around 5/16". If you are going to use a textured material resembling cinder block, you could look at using foam core (around a 1'4" thick)for your walls to adhere the siding to. You can get it at most craft stores. This material is really easy to cut. As to a gas pump, I would look at possibly "Ebay". You could always find one and due it up for Shell or Exxon. I hope this helps. Mark Quote Link to comment Share on other sites More sharing options...
vintagestang Posted April 11, 2012 Author Share Posted April 11, 2012 I already have an idea of what I want. I just don't know how to construct the dio. Thanks it does help some. Quote Link to comment Share on other sites More sharing options...
rel14 Posted April 11, 2012 Share Posted April 11, 2012 (edited) try black forest hobby supplys,,, Edited April 11, 2012 by rel14 Quote Link to comment Share on other sites More sharing options...
Mercman Posted April 11, 2012 Share Posted April 11, 2012 (edited) Contact Ed Shaver he is the gas station guru here. Here are a couple I did in in 1/87th. The first is from a Jarius Watson print. This one I redid from a built kit, also 1/87th. Edited April 11, 2012 by Mercman Quote Link to comment Share on other sites More sharing options...
Eshaver Posted April 11, 2012 Share Posted April 11, 2012 (edited) I dunno, meebie I need to a How to book on building the "Ultimate porcelain box service station" in 1-24th scale . Ed Shaver Edited April 11, 2012 by Eshaver Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.