wraith Posted February 14, 2013 Share Posted February 14, 2013 I started this in 1993 when i was a sophmore in high school. never got finished and got put away. I found it along with a stassh of old models at my parents 3-4 years ago and decided to finish it. got som work done on her and she again got put away. And now I finaly am hoping to "FINISH" her for good. these pics are how i found her a few years ago. All this work was done when I was 15 years old. paint and the 79 Camaro front suspension swap. never had a motor for it. was never sure what I wanted in it. I had to strip the paint on the hood as it was way to thick and oranged peeled. Testors spray paint for ya! I stripped it buy slowly soaking it in thinner and wiping it off. that was a day well spent as a 15 year old. then she got boxed up and stashed away. Quote Link to comment Share on other sites More sharing options...
wraith Posted February 14, 2013 Author Share Posted February 14, 2013 I decided against the slicks and the skinny front tires. When I restarted her I was unsure of how to finish her. I just started digging in the parts box and came up with some pieces. i cut off the quick change rear end as I wanted something different. The SBC and trans were very badly messed up pieces from a older 79 Camaro I had gotten from a friend. took alot of reshaping to get it to work. the headers were from a long gone ZZ Top 34 Ford. They too need some work. new rear end from a old Rampage Camaro. I found another hood i had for this kit. I had very badly mounted a hood scoop on it. i removed the scoop and grafted the cowl section fron the Rampage 69 Camaro hood. a lil sharpie marker magic. Quote Link to comment Share on other sites More sharing options...
wraith Posted February 14, 2013 Author Share Posted February 14, 2013 (edited) work on the SBC engine starter sourced from a AMT 55 Chevy pickup resin oil filter I also sourced the Edlebrock air cleaner and valve covers for it. Edited February 14, 2013 by wraith Quote Link to comment Share on other sites More sharing options...
wraith Posted February 14, 2013 Author Share Posted February 14, 2013 (edited) Some work on the headers and test fitting Edited February 14, 2013 by wraith Quote Link to comment Share on other sites More sharing options...
wraith Posted February 15, 2013 Author Share Posted February 15, 2013 Well maybe today I can continue with posting pics on her progress. Stupid computers at the library and maybe photobucket are not cooperating right now. Quote Link to comment Share on other sites More sharing options...
wraith Posted February 16, 2013 Author Share Posted February 16, 2013 (edited) some more previous progress pics the exhaust coming together the traction bars are also from the Rampage 69 Camaro here you can see the styrene strips on the rear crossmember that the exhaust will hang from the wheels and tires I sourced to use. they have since been replaced. rear end shot. trying to find some suitable taillights as at this time I hadn't been able to find the kits taillights. The rear bumber is from the AMT 72 GMC stepside kit. I narrowed it to fit my taste better. then just sanded it a lil smoother and out came the sharpie marker. Most of the ehaust was hing at this point and the exhaust tips are aluminum tubing Edited February 16, 2013 by wraith Quote Link to comment Share on other sites More sharing options...
wraith Posted February 16, 2013 Author Share Posted February 16, 2013 (edited) I finally found the kits taillights after looking in almost every model box i have. stripped the chrome from them and then sprayed them and the rear bumper with some cheap chrome spray paint from Ace Hardware. I was really impressed with how good the chrome look came out. The fuel cell in the bed is just sitting there. It the large resin one offered from Scale Dreams. Not sure if it will make the build or not. Edited February 16, 2013 by wraith Quote Link to comment Share on other sites More sharing options...
wraith Posted February 16, 2013 Author Share Posted February 16, 2013 (edited) And now on to the newest progress pics! exhaust 99% complete. took me a lil while to make a H-pipe I liked the driveshaft is aluminum tubing with the u-joints ends pushed in. Edited February 16, 2013 by wraith Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.