Nitro330 Posted February 5, 2013 Share Posted February 5, 2013 Hello all, I have been a member for some time, but this is my first post. Finally got set up on Photobucket to be able to post pics. Below is the last drag car that I finished in the fall. It is the Stiles and Stahl 67 Belvedere II Super Stock. This is an RO23 Belvedere of which only 55 were built and only 17 were 4 speeds. These were Hemi powered factory racers delivered race-ready without heater, radio, body insulation, carpet underlay and seam sealer, the RO23s were hundreds of pounds lighter than stock models. They were all white with basic bench seat interiors. The cars were delivered with the stock Street Hemi round chrome dual quad air cleaners but had the special open style flat steel dual quad air cleaner with hood sealing foam gasket delivered in the trunk of the car. To build this I used the Revell Sox & Martin GTX and made some subtle changes to make it close to a Belvedere. This included converting the front and rear seats to straight bench seats, adding the Belvedere chrome molding on the side and creating a stock style gas cap. I also scratch built the air cleaner. The decals are Fred Cady. Quote Link to comment Share on other sites More sharing options...
John Pol Posted February 5, 2013 Share Posted February 5, 2013 it looks really good did a great job with the whole car. Did well with the decals and wiring to I never had good luck with Fred Cady decals. By the waya did you remove the badge in the front grill to.If so how did you do that without hurting the reat of the grill. John Pol Quote Link to comment Share on other sites More sharing options...
Nitro330 Posted February 5, 2013 Author Share Posted February 5, 2013 Thanks John! Funny you ask about the grill. I contemplated that for a long time but didn't come up with a good way to do it, so just left it as the GTX grill. Quote Link to comment Share on other sites More sharing options...
Darbo Posted February 5, 2013 Share Posted February 5, 2013 Nice build Quote Link to comment Share on other sites More sharing options...
Mopar Mike Posted February 5, 2013 Share Posted February 5, 2013 Real nice. Love the detailing. Mopar To Ya Quote Link to comment Share on other sites More sharing options...
1972coronet Posted February 5, 2013 Share Posted February 5, 2013 Beautiful work , Nitro330 ! Did you happen to replace the kit's inaccurate 8.75" rear with the correct Dana 60 by any chance ? Quote Link to comment Share on other sites More sharing options...
W-409 Posted February 5, 2013 Share Posted February 5, 2013 Looks Excellent! There can never be too many Stockers or Super Stockers, especially when they are built very nicely. As This. My favorite part is the Detailing on the engine bay, it looks just like 1:1 engine. Nice paint and decaling too. How did you make the Air Cleaner? You said it's scratchbuilt. What materials you used? Quote Link to comment Share on other sites More sharing options...
vintagercr Posted February 5, 2013 Share Posted February 5, 2013 Nice clean build! Quote Link to comment Share on other sites More sharing options...
ChrisR Posted February 5, 2013 Share Posted February 5, 2013 Great model! Quote Link to comment Share on other sites More sharing options...
vintagedragfan Posted February 5, 2013 Share Posted February 5, 2013 super nice detail!! Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted February 5, 2013 Share Posted February 5, 2013 Very cool, I've got the same thing in my to do pile. What is the bench seat from ? Quote Link to comment Share on other sites More sharing options...
Nitro330 Posted February 5, 2013 Author Share Posted February 5, 2013 Beautiful work , Nitro330 ! Did you happen to replace the kit's inaccurate 8.75" rear with the correct Dana 60 by any chance ? Thanks John! No, I went with the kit rear. It was something I thought about when I was planning the build, but didn't have anything in the parts box. Quote Link to comment Share on other sites More sharing options...
Nitro330 Posted February 5, 2013 Author Share Posted February 5, 2013 Looks Excellent! There can never be too many Stockers or Super Stockers, especially when they are built very nicely. As This. My favorite part is the Detailing on the engine bay, it looks just like 1:1 engine. Nice paint and decaling too. How did you make the Air Cleaner? You said it's scratchbuilt. What materials you used? Thanks Niko! The air cleaner was made using a 1" round necklace charm that I drilled out and very thin adhesive-backed foam material that I cut into a thin strip. Both came from local craft store. The foam material is called "Silly Winks" and was in the kids craft area. Quote Link to comment Share on other sites More sharing options...
Nitro330 Posted February 5, 2013 Author Share Posted February 5, 2013 Very cool, I've got the same thing in my to do pile. What is the bench seat from ? Thanks Bill, the bench seats are scratch built. I couldn't find anything suitable, so I used the buckets as the base for the bench. I used card stock to make templates for the styrene, then lots of putty and sanding. The back seat was also done the same way. Below are a couple pics showing how I did them. This was my first time trying this so I wasn't sure how it would come out, but was pleased with the results. Finished bench seats. Used masking tape to add the texture part of the seats. Quote Link to comment Share on other sites More sharing options...
gasser59 Posted February 5, 2013 Share Posted February 5, 2013 Really cool build and I love the engine detailing. Nicely done trick with the seats. Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted February 5, 2013 Share Posted February 5, 2013 (edited) Very cool. I was thinking about modifying a bench seat from a lindberg 64 dodge kit. Never thought about tape for the texture part of it. I like it ps, there is a real 1967 Plymouth RO car on eBay now . Edited February 5, 2013 by gtx6970 Quote Link to comment Share on other sites More sharing options...
jjsipes Posted February 5, 2013 Share Posted February 5, 2013 Nice Quote Link to comment Share on other sites More sharing options...
Mooneyzs Posted February 5, 2013 Share Posted February 5, 2013 This is a beautiful and clean build. The detail on the engine looks great. Nice Job! Quote Link to comment Share on other sites More sharing options...
Nitro Neil Posted February 5, 2013 Share Posted February 5, 2013 Very nice, love the old Super Stockers. Quote Link to comment Share on other sites More sharing options...
Alan Posted February 5, 2013 Share Posted February 5, 2013 Terry, this is very well done !! Quote Link to comment Share on other sites More sharing options...
Nitro330 Posted February 5, 2013 Author Share Posted February 5, 2013 Thanks everyone, I appreciate the comments! Quote Link to comment Share on other sites More sharing options...
bondo bill Posted February 6, 2013 Share Posted February 6, 2013 great build Quote Link to comment Share on other sites More sharing options...
jeffs396 Posted February 6, 2013 Share Posted February 6, 2013 Great details! Quote Link to comment Share on other sites More sharing options...
caine440 Posted February 6, 2013 Share Posted February 6, 2013 Teryy , really nice work! Love you attention to detail! Love the air cleaner. Quote Link to comment Share on other sites More sharing options...
Mike 1017 Posted February 10, 2013 Share Posted February 10, 2013 Love these Mopar Super Stocks.Nice work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.