dannyi Posted December 31, 2010 Share Posted December 31, 2010 For those modelers who like to show their engines out of the vehicle, maybe in a garage scene, junkyard setting or next to a display car, I've come up with some rarely seen detail items. It's a 4 piece 10:1/2" clutch package. It includes a flywheel, pressure plate, clutch disc and a friction ring. These 4 pieces gives one several display options. You can mount the flywheel to the motor(using hex rod to make bolt heads)and leave off the pressure plate and clutch disc. Or add the pressure plate to the flywheel also. The clutch disc won't go between the flywheel and the pressure plate for obvious reasons, but was made for a bench top or floor display. For example a engine/trany rebuild scene in a shop or garage. The friction ring I call it is for the back of the pressure plate, that too is for a "part off" display. Thought these might be some nice detail items, please let me know what you guys think. Plan on added them to my product line, so your thoughts and input would be greatly appreciated! Quote Link to comment Share on other sites More sharing options...
george 53 Posted December 31, 2010 Share Posted December 31, 2010 Danny, you makein me crazy with all this detail stuff!!! Bring a set of axles AND these clutch packs, if they're, ready to next months meeting!!! :lol: Quote Link to comment Share on other sites More sharing options...
jeffb Posted December 31, 2010 Share Posted December 31, 2010 thats NICE! Quote Link to comment Share on other sites More sharing options...
Kris Morgan Posted December 31, 2010 Share Posted December 31, 2010 Danny, Just like the rest of your stuff, these parts look great. Quote Link to comment Share on other sites More sharing options...
RyanSilva Posted December 31, 2010 Share Posted December 31, 2010 I see the Taig is treating you well buddy! They look awesome, and it's nice to know you're the only go providing these stellar pieces at that type of detail level! Quote Link to comment Share on other sites More sharing options...
bobguar Posted January 1, 2011 Share Posted January 1, 2011 Really nice, how can I get a set? Quote Link to comment Share on other sites More sharing options...
ian ashton Posted January 1, 2011 Share Posted January 1, 2011 They look awesome! Very nice work, I'm sure it will be a great seller! Quote Link to comment Share on other sites More sharing options...
dannyi Posted January 1, 2011 Author Share Posted January 1, 2011 Thanks guys, I appreciate your positive comments and input! I really enjoy this aspect of our hobby and grateful to be associated with guys like Jeffb, Kris Morgan. And a special 'Thank You' to Ryan Silva, who has been a tremendous help to me. I would not be at this stage without his help! ....no problem George, I'll bring your axle set and a set of these too. ..bobbyg, I should have these available on my web site by mid-week. Have some tweaking to do and they should be ready to go.... Quote Link to comment Share on other sites More sharing options...
carsntrucks4you Posted January 1, 2011 Share Posted January 1, 2011 Great stuff. I want some of these Quote Link to comment Share on other sites More sharing options...
envious8420 Posted January 1, 2011 Share Posted January 1, 2011 Thats awesome Danny! Ive been working on flex plates and torque converters for the same reason. Quote Link to comment Share on other sites More sharing options...
Smart-Resins Posted January 1, 2011 Share Posted January 1, 2011 Looks awesome! I see other things too I like! May have to place a small order after I can pay my taxes! Quote Link to comment Share on other sites More sharing options...
Casey Posted January 2, 2011 Share Posted January 2, 2011 Good luck getting that disc aligned without and alignment tool. That flywheel looks great. Nice work. Quote Link to comment Share on other sites More sharing options...
dannyi Posted January 2, 2011 Author Share Posted January 2, 2011 ...thanks fellas, appreciate ya taking the time to comment. I like making these items you rarely see in kits or are hard to find. Casey, you mentioned an alignment tool. completely forgot about that! Quote Link to comment Share on other sites More sharing options...
george 53 Posted January 2, 2011 Share Posted January 2, 2011 Danny, just cut a piece of old broomstick, that'll work! Quote Link to comment Share on other sites More sharing options...
dannyi Posted January 2, 2011 Author Share Posted January 2, 2011 Danny, just cut a piece of old broomstick, that'll work! ...Hmmmm....1/25 scale broomstick...I'll get right on it!! Quote Link to comment Share on other sites More sharing options...
Lepew71 Posted March 17, 2011 Share Posted March 17, 2011 Hey Dudes & dudettes, I normally don't-- do posts !!! BUT --I just have to speak up this time, I just received a few sets of these and WOW They are GREAT. MAN I'm simply ecstatic, I love em I just want to scream and jump around like a little girl maybe not that much I think you get my drift. But I'm very happy with these, and just had to say something. Thanks for letting me squeal Quote Link to comment Share on other sites More sharing options...
george 53 Posted March 17, 2011 Share Posted March 17, 2011 Jim, Danny's stuff is WORTH squealin about!!! Have you EVER SEEN such nice detail on stuff that WASN'T mastered on a computer??? These things are GREAT! AND Danny's ALSO a member of the DMCC too!!! We've got a GREAT club, and members like Danny, Jeff, Kevin an Kris just make it THAT MUCH better! Support our hobby an TRY to join a club, you'll be ALL the better for it!!!!!!! Quote Link to comment Share on other sites More sharing options...
Lepew71 Posted March 18, 2011 Share Posted March 18, 2011 WITHOUT A COMPUTER . Dang that makes them even mo beta. As for supporting this hobby, I have done so for about the last oh say about 48 years, since I was 8. . MAN now i'm sad thinking about all that cash I'm going to bed now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.