outragis Posted January 25, 2013 Share Posted January 25, 2013 Fantastic! I wish they made one in kit form, this would be a big seller! Quote Link to comment Share on other sites More sharing options...
Danno Posted January 25, 2013 Share Posted January 25, 2013 Very nice!! Quote Link to comment Share on other sites More sharing options...
dougp Posted February 8, 2013 Author Share Posted February 8, 2013 Update 02/07/13 Thanks for all the great comments guys. It's coming along but not as quickly as I would like. I have a little progress to report. My paint order finally arrived so I’ve been working completing the chassis. First up was the exhaust. I thought about using the stock Louisville exhaust and running up through the bed, but it didn’t go with theme I’m after. So I used tube styrene and the mufflers/tips from a Big Foot monster truck kit and fabbed my own exhaust. Here is the comparison of the stock vs. custom and the final installation on the chassis. I used Model Masters iron rust to lightly weather the exhaust around the mufflers and bends from the exhaust manifolds and BMF the exhaust tips. On the Louisville short hauler kit the flaps were attached to the underside of the box and had to be shortened to fit their new location. The mud flaps where shortened, painted and weathered and attached with styrene tube run through the frame. And now the radiator/shroud, engine/trans, drive shaft and exhaust is all in place. I’m still prepping the body for paint and have started painting and detailing the interior. While waiting for my paint order I’ve started on what the Topkick will tow during the summer months…here is a teaser that started with great resin parts from Calnaga Castings, http://www.calnaga.com/index.html. Enjoy!!! Enjoy and thanks for looking... Quote Link to comment Share on other sites More sharing options...
tooltas Posted February 8, 2013 Share Posted February 8, 2013 what a baby of boat Quote Link to comment Share on other sites More sharing options...
Platerpants Posted February 12, 2013 Share Posted February 12, 2013 (edited) know of any 1/25 ford f600s? i want to do a ford 600 or 650 pickup soooo bad. and GREAT WORK! Edited February 12, 2013 by Platerpants Quote Link to comment Share on other sites More sharing options...
Alyn Posted February 13, 2013 Share Posted February 13, 2013 Excellent ! Your chassis is a dead ringer for the ones I use to steam clean and paint back in the day. Nice work Quote Link to comment Share on other sites More sharing options...
Fabrux Posted February 13, 2013 Share Posted February 13, 2013 know of any 1/25 ford f600s? i want to do a ford 600 or 650 pickup soooo bad. and GREAT WORK! Every once in a while I see on eBay a 1:25 resin 80-96 F-600-800 cab, grille, and interior. Would make a good starting point. Although being 1:25 scale you'd be limited to the AMT kits and a dually bed was never kitted. It could be made, though. Quote Link to comment Share on other sites More sharing options...
dougp Posted February 13, 2013 Author Share Posted February 13, 2013 Thanks for the comments. It's been a learning experience getting it to this point. As Kataranga said I've only seen a couple F600 resin conversions on ebay and they aren't easy to get. Also while doing 1:1 research with google on the topkick I found a couple of modeler's who've converted die-cast F600s. Again very few at that. Quote Link to comment Share on other sites More sharing options...
bandit1 Posted February 13, 2013 Share Posted February 13, 2013 know of any 1/25 ford f600s? i want to do a ford 600 or 650 pickup soooo bad. and GREAT WORK! Get ahold of Eric Jones over @ P and P vintage resins....He has an f650/800 resin conversion kit!...i have it to and im building a fire truck with it... Quote Link to comment Share on other sites More sharing options...
Edsel-Dan Posted February 14, 2013 Share Posted February 14, 2013 Actually Revell Did do a Dually ford Pickup. It was a Snap kit and a Shortbox. I have the body from it Quote Link to comment Share on other sites More sharing options...
exesivefire Posted February 14, 2013 Share Posted February 14, 2013 Amazing work so far, the detail on this is top notch! Quote Link to comment Share on other sites More sharing options...
dougp Posted March 13, 2013 Author Share Posted March 13, 2013 (edited) Update 02/07/13 Just a quick update to let everyone know I’m still working on this build. Both my wip’s have had set backs. While waiting on parts that went into the purple pond, some work was done on the Topkick and the fabbing on the ski boat started. I spent a couple of hours with a dremel abrasive wheel and file to open up the grille. A little wet sanding and it will be ready for paint. About the only thing that has gone right with the interior is the dash. A web photo of a Silverado gauge cluster was used to make a decal for the dash. Once in place it was coated in Micro Krystal Klear. Tamiya gloss aluminum was used on the knobs and buttons to duplicate the use of aftermarket knob/button covers. A green wash was used on the around the radio buttons and display. After researching custom speed/ski boats on the web I decided to do something a little different. With some parts left over from a couple Revell Concept Camaro kits I decided to put them to use. I’m using the dash and taillight surrounds to add a unique look to my speed boat. I raised the front deck with sheet styrene and left a groove at the leading edge of the dash so a modified windshield can be slipped into place after the hull is painted. The rear transom has to be raised to fit the resin jet drive, so the taillight surrounds are being used as fillers. The stern of the boat will be shaped around the taillights. The seats are resin Recarro’s that were cut down to just above the side bolsters and super glued together. The sides are filled in with sheet styrene and putty. The engine is from Revell’s Corvette C5-R kit with engine mounts made from sheet and rod styrene. Edited March 23, 2013 by dougp Quote Link to comment Share on other sites More sharing options...
Platerpants Posted March 13, 2013 Share Posted March 13, 2013 cool Quote Link to comment Share on other sites More sharing options...
tooltas Posted March 13, 2013 Share Posted March 13, 2013 thats going to be a bad boat Quote Link to comment Share on other sites More sharing options...
Davewilly Posted March 13, 2013 Share Posted March 13, 2013 Looking great so far...I cant wait to see this finished off!....no pressure or anything! Quote Link to comment Share on other sites More sharing options...
bandit1 Posted March 13, 2013 Share Posted March 13, 2013 Love the Speed Boat!...maybe somesort of mettalic blue with either white or silver stripes? Quote Link to comment Share on other sites More sharing options...
DailyGrindCustoms Posted March 23, 2013 Share Posted March 23, 2013 This is sweet!! Any updates? Quote Link to comment Share on other sites More sharing options...
dougp Posted March 23, 2013 Author Share Posted March 23, 2013 Update 02/07/13 Not much to report, but the interior is complete and the body is ready for paint. Here is the completed interior. I used a seat belt p/e kit from scale dreams with channel styrene for the seatbelt seat hangers. I notched the B pillar panel for the front seat belt retractor slots and cut slots in the rear bulkhead for the back seat belt reatractor slots. The interior is Tamiya matt black with a flat black and semi gloss black wash. The rubber floor covering was sprayed with Tamiya semi gloss black and the gauge panel was a homemade decal. Thanks for looking. Quote Link to comment Share on other sites More sharing options...
Platerpants Posted March 23, 2013 Share Posted March 23, 2013 nice Quote Link to comment Share on other sites More sharing options...
dougp Posted April 7, 2013 Author Share Posted April 7, 2013 (edited) Well its been slow going. Finally got the color on the cab and bed. The hood and tailgate are in the spray booth now. Next a coat of clear before trying to wash the panel lines before the final coats of clear and polishing. I used Testors One Coat Laquers with the base color being Diamond Dust with Icy Blue followed by DeJa Blue. Thanks for looking... Edited April 7, 2013 by dougp Quote Link to comment Share on other sites More sharing options...
01blueedge Posted April 7, 2013 Share Posted April 7, 2013 thats sweet looking I like the paint job Quote Link to comment Share on other sites More sharing options...
hooknladderno1 Posted April 7, 2013 Share Posted April 7, 2013 WOW!!! What an awesome job! I have appreciated all of the fine work you have done on this project, but that color just POPS! I can't wait to see the next shots! David Quote Link to comment Share on other sites More sharing options...
crazyrichard Posted April 7, 2013 Share Posted April 7, 2013 whow that stunning !!!!!!! Quote Link to comment Share on other sites More sharing options...
hjracing Posted April 7, 2013 Share Posted April 7, 2013 I like your color scene choice, yessss sir! Good paint job! Quote Link to comment Share on other sites More sharing options...
dougp Posted April 7, 2013 Author Share Posted April 7, 2013 Thanks for the great comments. My original paint scheme just didn't work out. The original was going to white above the belt line with diamond dust smoked with burnt styrene and a clear orange cover coat below the belt line. Colors didn't turn out as expected, so it was back to the drawing board. I needed something that would pop and also look great on the speed boat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.