Jump to content
Model Cars Magazine Forum

Project: "Inferno" 49 Merc - *Update p17* 3/13/15


JasonFL

Recommended Posts

What's one to do when they are in a jam with their other two builds.....start another of course. After seeing everyone building up some really cool mercs I thought I would finally take mine out of the box and give it a go.

I'm going with the Revell 49' Mercury Coupe, nothing to crazy, just simple clean mods, slammed, and a wild set of flames. Just your typical run of the mill hotrod.

I started by just laying down a couple sets of different sized flames to get an idea how I want it to look before I start the work.

56673ffd.jpg

2e98cadc.jpg

dac8de2a.jpg

3b6cbda5.jpg

DSCN6162.jpg

DSCN6160.jpg

Edited by JasonFL
Link to comment
Share on other sites

Then I moved to the hood lines. My plan was to use the all smooth hood but on my first attempt I cut the new lines downward instead of sideways which gave me huge ugly gapped lines so I had to go with the louvered hood. I guess its a good thing they give you a spare hood.

(If anyone knows how to shave the louvers off without leaving indents behind lmk, thanks)

DSCN6200.jpg

DSCN6206.jpg

cf00a425.jpg

9bea8433.jpg

I made the corners more straight edged to match the line of the trunk opening.

9b92abca.jpg

I also shaved the front marker light holes, bumper holes, and the middle grill holes. Then I had notched the front for the new bumper.

DSCN6221.jpg

Edited by JasonFL
Link to comment
Share on other sites

I cut the middle pillar out to give it a longer look.

0b156e91.jpg

I like the lines around the window, so I scribed new ones to keep the flow, then I shaved the top of the old door lines and the hole for the mirror.

8b80b46d.jpg

182ed59b.jpg

Had to continue the line so the door could open so this is what I came up with. I'm pretty happy with it. I might put the mirror here slopping down.

DSCN6282.jpg

2b0d3500626af8230f5fb1932ea726b3.jpg

I use the lamp sometimes to help me scribe, thought this was a cool shot. Gives you more of an idea what it looks like.

a6656b0b98ac4d7544e93c5460aa6053.jpg

Link to comment
Share on other sites

Looking good, Jason! lt's all flowing together nicely. GREAT job on re-scribing the body lines. l think l understand your last e-mail now. Lotsa great minds here! Carry on! Bart.

Looking good, Jason! lt's all flowing together nicely. GREAT job on re-scribing the body lines. l think l understand your last e-mail now. Lotsa great minds here! Carry on! Bart.

Link to comment
Share on other sites

Wow...the rescribed trunk is a "why didn't I think of that" forehead slapper.

So simple yet subtle..great improvement and it just ...connects with the curve

of the Merc. Keep up the good work and don't get overwhelmed with too many

projects. The hood work ...ROCKS !

Link to comment
Share on other sites

Man, that is some beautiful work you've got going on there so far. I'm dyin' to see those flames in color.......

As far as getting the louvers off withoug leaving indents, I use a small flat-file, followed by 180 grit and then 600 grit paper (either free-cut paper used dry or preferably wet-or-dry paper used wet) wrapped around a very flat sanding stick. Finger-nail emery boards will work too. Just watch out for the peak in the hood. I'll usually run a line of masking tape down the crease on the side I'm not sanding on to protect it. And go s l o w.

Link to comment
Share on other sites

Nice work so far, looking forward to seeing more. You're good at rescribing lines, I tend to jump out of the groove at the worst times. I like the flame job you're plotting out. What colors were you thinking of using?

Thanks Tom. I've jumped the lines here and there but I find if you put a piece of tape down and do your first few lines REALLY slow it's well worth it. It's teaching me a lot about patients...lol.

Do to funds I only have two colors, flat black and lime ice. Im going to do something a little different and do the body lime ice and the flames flat black. Not sure what color pin stripe, maybe orange.

Your scribing skills are impressive. What tool do you use for it?

Thanks Rob, appreciate it. I just use the back of my exacto knife, I'm not even sure what size I use.(everyone on the forum seem to all suggest a #11 blade) I just start with the thinnest blade and go thicker if I need to. Then I just hit the edges with some sandpaper when I'm finished to dull them down a little.

Link to comment
Share on other sites

Looks most excellent.

Thanks Jim.

Looking good, Jason! lt's all flowing together nicely. GREAT job on re-scribing the body lines. l think l understand your last e-mail now. Lotsa great minds here! Carry on! Bart.

Thanks Bart I appreciate the compliments. I figured I'd stop jamming your email up with photos and share with everyone..haha. Which one of the 20 emails are you referring to? I'm guessing the one about the clearence issue.

Link to comment
Share on other sites

Wow...the rescribed trunk is a "why didn't I think of that" forehead slapper.

So simple yet subtle..great improvement and it just ...connects with the curve

of the Merc. Keep up the good work and don't get overwhelmed with too many

projects. The hood work ...ROCKS !

Thanks James. I was thinking the same thing about the trunk line, I was shocked when I couldn't find one person who changed it. Same with the hood lines, I made the corners more straight edged to match the line of the trunk opening.

I'm trying to make this the "simple" build as to not get overwhelmed. So far so good, thanks again.

Very nice work so far! I dig those wild flames, it reminds me of something Watson might do.

Wow! Thanks Glenn. That is one heck of a compliment, I'm glad you like them so far. Hopefully they come out that good with paint.

Link to comment
Share on other sites

Man, that is some beautiful work you've got going on there so far. I'm dyin' to see those flames in color.......

As far as getting the louvers off withoug leaving indents, I use a small flat-file, followed by 180 grit and then 600 grit paper (either free-cut paper used dry or preferably wet-or-dry paper used wet) wrapped around a very flat sanding stick. Finger-nail emery boards will work too. Just watch out for the peak in the hood. I'll usually run a line of masking tape down the crease on the side I'm not sanding on to protect it. And go s l o w.

Thanks Will. It will be a while until I can get the flames in color, I need to get me some sealer and clear.

Thanks again for coming to the rescue with some knowledge. I talk to Bart (Bartster) a lot through email and he was telling me the same thing. I was hoping there would be another way. I'll just have to leave them until I get some supplies.

Link to comment
Share on other sites

Wanted to keep the chrome look so I had to carefully cut the bumpers and mod them up.

Here's the bumper and the exhaust opening I found off a chrome tree

DSCN6216.jpg

DSCN6217.jpg

I took the rear bumper, cut it in half, shortened them up, brought them a little closer to the body, and then dropped them down just a hair or two.

Then I sanded the sides of the chrome cones down and I'm able to hide it behind the bumpers so it all looks connected.

Here it is all together kinda just sitting there but you get the idea. A little more tightening up and it should be there.

DSCN6298.jpg

DSCN6299.jpg

c9b685bf.jpg

Any opinions on weather I should move the tailpipes out further and make room for a license plate?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...