nitro_force_fan Posted January 12, 2013 Author Share Posted January 12, 2013 I just looked thru all my AFX cars pictures. And I didn't find one single picture of the Landy car with a vent wing frame but every one has a frame around the door glass. I DID find a few of the Sox and MArtin Paper Tiger 1 car that had the vent wing frames. I still think this is a cool picture . If I cound find the truck cab, I might considering attempting this in scale . You are right Landys car didnt have the window vent glass! Well BLAH_BLAH_BLAH_BLAH! Now what? ...lol Quote Link to comment Share on other sites More sharing options...
nitro_force_fan Posted January 12, 2013 Author Share Posted January 12, 2013 That is not a Speed city casting as the Speed City casting has the door frame . http://www.speedcityresin.com/MoparPage.htm My guess is it is a MCW casting as it looks alot like the 65 Sedan AWB I have. I could be wrong. Did it come with a 4 head light grille or just a 2 headlight grille? It came with the 2 headlight grill Quote Link to comment Share on other sites More sharing options...
nitro_force_fan Posted January 12, 2013 Author Share Posted January 12, 2013 If using the RG engine do NOT use the front accessories, alt, pwr steering pump etc, get a 426 finned timing cover and use a belt and pulleys with injection pump, with alt. optional ....... By removing the filler cap/dipstick tube off of the power steering pump, you could make that into the injection pump ....... Well keep in mind im not trying to go totally bonkers on the detail. I just dont have the time or patiance for that...lol........just trying to make it a fun build thats pretty close to accurate. Not sure whos car im gonna make it now that i dont have the correst car for Landys..............or it could just be a "what if". I appreciate all the help you guys are giving me! Any other tips would be helpful.....thanks...joe Quote Link to comment Share on other sites More sharing options...
nitro_force_fan Posted January 12, 2013 Author Share Posted January 12, 2013 Joe What wheels are you going to use if you build it as a Landy car? I have seen several different combos and am not sure what to go with. I have a cool magazine article where he is doing tire testing and the car is running Cragars. Yes i was gonna use the cragers on this Quote Link to comment Share on other sites More sharing options...
nitro_force_fan Posted January 12, 2013 Author Share Posted January 12, 2013 I just looked thru all my AFX cars pictures. And I didn't find one single picture of the Landy car with a vent wing frame but every one has a frame around the door glass. I DID find a few of the Sox and MArtin Paper Tiger 1 car that had the vent wing frames. I still think this is a cool picture . If I cound find the truck cab, I might considering attempting this in scale . Ive been looking throught pics of the 65's and i cant seem to find any that had the window vent frame. hhhhhmmmmm Quote Link to comment Share on other sites More sharing options...
Alan Posted January 12, 2013 Share Posted January 12, 2013 (edited) Here is a pic of Landy with a single headlight grill, plus, all you have to do is remove the vent window frames Edited January 12, 2013 by Alan Quote Link to comment Share on other sites More sharing options...
nitro_force_fan Posted January 12, 2013 Author Share Posted January 12, 2013 Here is a pic of Landy with a single headlight grill, plus, all you have to do is remove the vent window frames Yep i think thats exactly what im gonna do! Quote Link to comment Share on other sites More sharing options...
Alan Posted January 12, 2013 Share Posted January 12, 2013 Here is a pic w/out the injection Quote Link to comment Share on other sites More sharing options...
1320wayne Posted January 13, 2013 Share Posted January 13, 2013 Here is a pic w/out the injection Remember that some of the setups back then were cars with full hood scoops but still an injected combination only using shorter stacks. And then some were also carburated. Quote Link to comment Share on other sites More sharing options...
nitro_force_fan Posted January 13, 2013 Author Share Posted January 13, 2013 (edited) Remember that some of the setups back then were cars with full hood scoops but still an injected combination only using shorter stacks. And then some were also carburated. Definately gonna be injection! Nothing looked cooler than that! Edited January 13, 2013 by nitro_force_fan Quote Link to comment Share on other sites More sharing options...
caine440 Posted January 13, 2013 Share Posted January 13, 2013 Sounds like you have a good plan! Have fun with it! Quote Link to comment Share on other sites More sharing options...
Alan Posted January 13, 2013 Share Posted January 13, 2013 Stick cars ran shorter stacks as opposed to the autos that ran the much taller stacks so I would guess that shot of Landy's with no stacks was carbed as it was an automatic ...... If someone knows for sure, please chime in Quote Link to comment Share on other sites More sharing options...
nitro_force_fan Posted January 13, 2013 Author Share Posted January 13, 2013 All the pics ive found of Landys car show it has chrome bumpers. Well of course mine are resin so there anything out there for paint that comes close to chrome? I know ive seen that chrome paint a before but not sure how it would work.anyone? Any ideas?..........Joe Quote Link to comment Share on other sites More sharing options...
Alan Posted January 13, 2013 Share Posted January 13, 2013 Alclad, first you spray it with gloss black, then the Alclad chrome ...... Looks better than kit chrome Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted January 13, 2013 Share Posted January 13, 2013 All the AFX cars were delivered with a crossram , so early on many cars ran with them ( thus the hood scoop ) Also, it would not be out of the question to run short stack injection and still be under the hood scoop Quote Link to comment Share on other sites More sharing options...
Craig Irwin Posted January 13, 2013 Share Posted January 13, 2013 These cars changed almost weekly, almost anything is "right", some team probably ran it at least once. Quote Link to comment Share on other sites More sharing options...
1320wayne Posted January 14, 2013 Share Posted January 14, 2013 Here is some added history so you can be aware of the possibilities. Dave Strickler ran a 65 4-speed car with short stacks and a full hood scoop. In fact, the restored car that sits in the Chrysler museum is set up like this. The Pandemonium 65 ran short stacks and a full scoop at one time. The original Mr. Norm's 65, two-tone blue car, was purchased from Roger Lindamood and first run as a 4-speed, short stack with full scoop. A short time thereafter they switched over to the full blown version that most people remember. The Golden Commandos ran a short stack car with full hood scoop. And a few others ran this same combination at one time or another. That being said, it didn't take long for most teams to realize that they weren't getting enough air into the stacks with the full scoop so they either left the scoop and cut an opening for air flow, removed the scoop outright or switched to an automatic setup and went with the tall stacks and either left the scoop in place with an opening for the stacks or removed the scoop alltogether. There are plenty of different looks that you can go with. For the sake of accuracy it all depends on whether or not you have the correct research material to support the build that you choose to do. Or, because it's model building, you build how you want regardless of whether or not it's an accurate depiction of what really existed. Quote Link to comment Share on other sites More sharing options...
nitro_force_fan Posted January 20, 2013 Author Share Posted January 20, 2013 Well heres the latest progrees on my awb. Not much done this week. Wife took over my desk so i had to find another space....lol.. Plus her and my son have both been sick. Gonna work on it a little today between football games. Heres a pic..Joe Quote Link to comment Share on other sites More sharing options...
caine440 Posted January 21, 2013 Share Posted January 21, 2013 Looking good! Hope the family gets feeling better soon. Quote Link to comment Share on other sites More sharing options...
nitro_force_fan Posted January 27, 2013 Author Share Posted January 27, 2013 Well worked on it some more today and getting really frustrated. Nothing seems to be fitting right and everything is fighting me. Biggest thing is im using the dash board from the 64 color me gone car and it just doesnt fit right. Getting fed up.........lol Quote Link to comment Share on other sites More sharing options...
1972coronet Posted January 28, 2013 Share Posted January 28, 2013 [is] there anything [paint-wise] that comes close to chrome? I know ive seen that chrome paint before but not sure how it would work.anyone? Any ideas?..........Joe I've had great luck with Duplicolor aerosol Chrome . It's readily available at any auto parts store ; it's reasonablly-priced , and goes on smoothly (well , it smoothes-out quite nicely). I've sprayed it over gloss black as well as dull aluminum , with equal results . Allclad is good ; I'm not going to knock it , but it seems to be "fragile" (e.g. , don't *handle* the painted part(s) excessively during or after assembly) . Quote Link to comment Share on other sites More sharing options...
vintagedragfan Posted January 28, 2013 Share Posted January 28, 2013 great start Joseph, ready to see more of this AWB Quote Link to comment Share on other sites More sharing options...
caine440 Posted January 28, 2013 Share Posted January 28, 2013 Yep, I am fighting the interior fit up also. You will get it, hang in there! Quote Link to comment Share on other sites More sharing options...
tubbs Posted January 28, 2013 Share Posted January 28, 2013 (edited) Well worked on it some more today and getting really frustrated. Nothing seems to be fitting right and everything is fighting me. Biggest thing is im using the dash board from the 64 color me gone car and it just doesnt fit right. Getting fed up.........lol on no you dont!! i am too cheap to spent the money on these resin kits. so when someone starts building one, i like to follow. again, dont be like me and throw this on a shelf !!! we are modelers, we fight thru the "don't fits" and the "injector vs no injectors" ..... KEEP PUSHIN MAN !!!! its looking great. injection is too cool, but i think it would be neat to build one as it started out. Edited January 28, 2013 by tubbs Quote Link to comment Share on other sites More sharing options...
jeffaary Posted February 22, 2013 Share Posted February 22, 2013 The truck cab is available in resin from Keith at sourceks@msn.com. I have one on the bench to be built. Very nice quality. If I cound find the truck cab, I might considering attempting this in scale Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.