Jump to content
Model Cars Magazine Forum

1/25 AMT '41 Ford Woody Street Rod


Casey

Recommended Posts

Amt%2041%20Woody%20Wagon.jpg

Would anyone who has the above-pictured AMT '41 Ford Woody kit be willing to answer a few questions?

1) What size/diameter are the 5-slot wheels, either the scale size (15", 16", etc.) or actual measurement of O.D. (11/16", etc.)? Which tires are included in the kit for use with these wheels? The box art model is so heavily airbrushed you can't tell what's actually included. :angry:

2) What does the included surf board look like? Are there any other "extra" pieces in the kit that could be used in a diorama or similar, or just the surfboard?

Link to comment
Share on other sites

Casey,

Sorry for the crappy pic, couldn't get the lights close enough.

The wheels measure about 11/16" od at the edge of rim. They fit these tires which are also in the AMT Camaro and Firebird kits.

The wheels look bad to me and do not match anything in existance in 1:1.

P1010508-vi.jpg

The surfboard scales out to a genric 7' long-board and is pretty nicely formed. Except for the Skeg which is not correct for the era. I used two of them for my Rat Wood where I made more correct skegs...

P1010515-vi.jpg

No other accessories parts are included for diorama purposes.

Edited by Jairus
Link to comment
Share on other sites

Casey, yes one surfboard. I purchased two kits for the two boards.

Steve, knew if I made a declarative statement like that someone would find an example that was close..... :D

yeah, they are probably suppose to be Halibrands but the wheel rim is too thick and the aformentioned raised edge around the openings says to me that those wheels will remain forever in my spares box....

Link to comment
Share on other sites

Casey, yes one surfboard. I purchased two kits for the two boards.

Steve, knew if I made a declarative statement like that someone would find an example that was close..... :D

yeah, they are probably suppose to be Halibrands but the wheel rim is too thick and the aformentioned raised edge around the openings says to me that those wheels will remain forever in my spares box....

Thanks, I may have to pick up one locally for cheap, just for the board.

I had no idea what a skag was at first. We don't do much surfin' here on Lake Michigan. :lol:

Link to comment
Share on other sites

"Skeg"!

That is the fin that sticks down into the water providing control. A surf board is curved at the top and most are fairly flat on the bottom when viewed in section vs. profile. You turn through the water by tilting the board slightly like water skis thusly changing direction. Surf boards also have what are called "rails". These are slight ridges along the bottom edges. Most modern boards have three skeg's, two on the rails and one down the center that is sometimes adjustable. Vintage long boards only have one such skeg or fin. Most surfers today use a short-board with three fins because they can change direction very quickly thus staying in the sweet spot of the wave easier. A long-board is like a caddy in that it rides smoother, but is slower to turn and requires more experience to ride well, while a short board is more like a sports car.

I would suggest you pick up a copy of Long-Board magazine for reference when detailing and painting your boards as there is a lot you can learn.... not to mention the coloring, feel and vib of surfing.

It's all good... :D

Link to comment
Share on other sites

They look like Halibrand Speedways to me. , , Although they seem to be missing the lip around the openings.


They are very close. I just picked up this kit today and the wheels aren't perfect, but they're decent for a 1/25th scale project. Too bad the AMT tires' raised lettering is way oversized. The surfboard is nice, though, skeg inaccuracies aside.

I was really impressed by the detail on the body, though. A full wood strip headliner cast into the underside of the roof, in-scale vinyl top texture on the roof, and the woodgrain on the flat panels looks good, albeit a bit faint. Nicely done.
Link to comment
Share on other sites

The wheels scale out to 17" in 1/25th scale, so that's not a bad thing. They wheels (fronts and backs) fit much better inside the Revell Goodyear VR50s I had in my parts box than they do on the kit-supplied Goodyears, so I'll find a use for them. I think they'd look better in a flat aluminum or magnesium paint, though.

Link to comment
Share on other sites

The wheels are more like a set of slotted mags with a Hallibrand style lug cover.

They sell or used to sell just the lug cover. Makes any wheel look more modern.

I do have to agree with the kit being a very nice canvas for a variety of building styles with WoodyRat/Driftwood being one of the finest examples I have seen... (Jairus, which is the real name of this piece of 3-D art?)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...