Gray Smith Posted November 9, 2010 Share Posted November 9, 2010 Here we go.. I'm sorry I didn't read the rules fully about glueing the chassis together before pics were taken, but trust me this was all done last night, I just got the kit home on sunday. I bought the DD kit and I swapped the SD parts with a friend...who hadn't started on his either, please let me know if this is ok with you guys...as you can see in the box, there is nothing else started on... Anyway this will be my version of a UPS truck, I'm also going to do a single headlight conversion and I've gotten in touch with Jamie to get some of his really nice 5 hole wheels. I'll either find a brown thats close to UPS brown or i'll take the easy route and order some from Scale Finishes. Like I said, this will be a quickie build with detail...trying to keep the mods to a minimum since this is also being entered in my local club group build which ends in January Quote Link to comment Share on other sites More sharing options...
Zhu Posted November 9, 2010 Share Posted November 9, 2010 I was wondering if you had room for me with something European. I’m thinking of something from the past like one of these two. And if I have the time something from the present. What do you think ? Davey. Quote Link to comment Share on other sites More sharing options...
Gray Smith Posted November 9, 2010 Share Posted November 9, 2010 And if I have the time something from the present. What do you think ? Davey. Oh yeah def. go with the Renault, I love some modern European cabovers Quote Link to comment Share on other sites More sharing options...
Aaronw Posted November 9, 2010 Share Posted November 9, 2010 I think I'll do something with the Lindberg Dodge L-700. I keep getting them with the Lindberg trailer kits, so I should probably see how they build up. I have 3 weeks of leave to burn up in December so I will be getting a head start. Quote Link to comment Share on other sites More sharing options...
Danno Posted November 9, 2010 Share Posted November 9, 2010 I might as well join this one, too! I'm already signed up for a couple other community builds, but this one allows enough time for even me!! LOL. I'll do two: Pete 359 tractor with Lowboy trailer. ALF Eagle pumper. Pix to follow. Quote Link to comment Share on other sites More sharing options...
rssschris Posted November 9, 2010 Share Posted November 9, 2010 OK, I will be building an AMT Diamond Reo & AMT`s Livestock trailer. Picked them up from Ebay. Both open , complete & unstarted. http://s1115.photobucket.com/albums/k558/rssschris2/Truck%20biuld/?action=view¤t=Reo.jpg#!oZZ3QQcurrentZZhttp%3A%2F%2Fs1115.photobucket.com%2Falbums%2Fk558%2Frssschris2%2FTruck%2520biuld%2F%3Faction%3Dview%26current%3DReo.jpg%26 http://s1115.photobucket.com/albums/k558/rssschris2/Truck%20biuld/?action=view¤t=Reo.jpg#!oZZ2QQcurrentZZhttp%3A%2F%2Fs1115.photobucket.com%2Falbums%2Fk558%2Frssschris2%2FTruck%2520biuld%2F%3Faction%3Dview%26current%3DLivestockvan.jpg%26 http://s1115.photobucket.com/albums/k558/rssschris2/Truck%20biuld/?action=view¤t=Reo.jpg#!oZZ1QQcurrentZZhttp%3A%2F%2Fs1115.photobucket.com%2Falbums%2Fk558%2Frssschris2%2FTruck%2520biuld%2F%3Faction%3Dview%26current%3Dopencomplete.jpg%26 Both will be built basiclly box stock as I`m new to this. Chris Downs Quote Link to comment Share on other sites More sharing options...
rssschris Posted November 9, 2010 Share Posted November 9, 2010 I have a ?, How can I imbed pics in my post instead of links to the pics ? Could someone send me a pm on this ? Chris Quote Link to comment Share on other sites More sharing options...
whale392 Posted November 9, 2010 Share Posted November 9, 2010 Matt, if I commit to doing this, it means that I have to finish my Mustang convert for my CBP AND the 1983 Levin for the Japanese car CBP first. I also need to get to work on my KW W900A and trailer. IF, and that is a BIG IF, I do this........I have some Pete 359s that will collide to form one, and a 48' dropdeck airride that will tage along behind it (I will not mention the tarped load yet). Quote Link to comment Share on other sites More sharing options...
highway Posted November 9, 2010 Author Share Posted November 9, 2010 I'm sorry I didn't read the rules fully about glueing the chassis together before pics were taken, but trust me this was all done last night, I just got the kit home on sunday. I bought the DD kit and I swapped the SD parts with a friend...who hadn't started on his either, please let me know if this is ok with you guys...as you can see in the box, there is nothing else started on... You're fine, Gray! It's a fine example of the "partially started" builds that are allowed! Quote Link to comment Share on other sites More sharing options...
highway Posted November 9, 2010 Author Share Posted November 9, 2010 I was wondering if you had room for me with something European. I’m thinking of something from the past like one of these two. And if I have the time something from the present. What do you think ? Davey. Wonderful, Davey! Right now I have you in the list as a go for all three, if you don't want to do all three, just let me know which you aren't going build so I can edit the entry list. Quote Link to comment Share on other sites More sharing options...
highway Posted November 9, 2010 Author Share Posted November 9, 2010 I might as well join this one, too! I'm already signed up for a couple other community builds, but this one allows enough time for even me!! LOL. I'll do two: Pete 359 tractor with Lowboy trailer. ALF Eagle pumper. Pix to follow. Great to have you, Dan. I just have one question, will the pumper be a load on the lowboy or a separate entry? No problem either way, I'm just trying to mark things as a load if that's what they will be built as. Quote Link to comment Share on other sites More sharing options...
cam Posted November 9, 2010 Share Posted November 9, 2010 Matt I posted the pics on my first post. Quote Link to comment Share on other sites More sharing options...
highway Posted November 9, 2010 Author Share Posted November 9, 2010 Matt I posted the pics on my first post. Ok, Chris, I have the list updated. Quote Link to comment Share on other sites More sharing options...
highway Posted November 10, 2010 Author Share Posted November 10, 2010 OK, I will be building an AMT Diamond Reo & AMT`s Livestock trailer. Picked them up from Ebay. Both open , complete & unstarted. Both will be built basiclly box stock as I`m new to this. Chris Downs Chris, just a word of advice here, have some small clamps and super glue on hand for the trailer. I'm not saying you will have the same problem, but my trailer that I'm building for another project had a slight warp in the roof. I used clamps to hold it down while the super glue set up. If you do happen to have the same issue, clamp the roof down in position, and at the back of the trailer where the roof and meet, there will (or at least should) be a small square at the end of the joint between the wall and roof. Put a few drops of thin super glue in that square area and hold the trailer at about a 45 degree angle, with the rear facing up. This will allow the super glue to run the entire length of the trailer side to roof joint. If you want, I'll take a pic of the area I'm talking about for you. Quote Link to comment Share on other sites More sharing options...
bigern26 Posted November 10, 2010 Share Posted November 10, 2010 You can throw my name down, But I do not have a truck to enter yet. I am going to go to the hobby shop this weekend to pick one up!! What is the deadline on this? Quote Link to comment Share on other sites More sharing options...
dwc43 Posted November 10, 2010 Share Posted November 10, 2010 I'll throw my name in here. I have a Paystar that I built the engine only. I'm collecting parts for my "Movin On" KW and I'm sending off my shipping fee for a Diamond Reo that's partly built and will be torn apart and rebuilt. Quote Link to comment Share on other sites More sharing options...
mistermodel Posted November 10, 2010 Share Posted November 10, 2010 I'll get in the on the fun.I'll enter a revell western life pete 353,that will have proper 359 fenders,so it will be a 359.I just have parts that are still on the tree primed ,ready to sand and such,and interior parts painted.Will post pics.Not sure what I'll be doing to it yet,box stock would be a big change for me Quote Link to comment Share on other sites More sharing options...
billhytla Posted November 10, 2010 Share Posted November 10, 2010 I would like to join I will be building american superliner with the fruehauf flatbed trailer Quote Link to comment Share on other sites More sharing options...
highway Posted November 10, 2010 Author Share Posted November 10, 2010 You can throw my name down, But I do not have a truck to enter yet. I am going to go to the hobby shop this weekend to pick one up!! What is the deadline on this? Dec 31, 2011, so you have plenty of time. Quote Link to comment Share on other sites More sharing options...
highway Posted November 10, 2010 Author Share Posted November 10, 2010 List is updated! Wow 23 enrtrants just in the first day! I didn't even count how many trucks so far, but as long as everything goes like this, the MCM Truck Stop lot will be a full one! Oh and just so everyone doesn't think I started this build without an idea of what I'm going to build, I do have an idea. I just have to get the big Ford finished for the CBP it is in on another site before I start this one! If I go with the present plan, which I probably will, I will probably have 10 kits involved with the build, that's counting the support vehicles and police escort for two heavy haulers. Quote Link to comment Share on other sites More sharing options...
niteowl7710 Posted November 10, 2010 Share Posted November 10, 2010 If I go with the present plan, which I probably will, I will probably have 10 kits involved with the build, that's counting the support vehicles and police escort for two heavy haulers. I gotta have cars for the hauler...which is a mutant plan for a diorama depending on how into the idea I get. Quote Link to comment Share on other sites More sharing options...
rssschris Posted November 10, 2010 Share Posted November 10, 2010 Chris, just a word of advice here, have some small clamps and super glue on hand for the trailer. I'm not saying you will have the same problem, but my trailer that I'm building for another project had a slight warp in the roof. I used clamps to hold it down while the super glue set up. If you do happen to have the same issue, clamp the roof down in position, and at the back of the trailer where the roof and meet, there will (or at least should) be a small square at the end of the joint between the wall and roof. Put a few drops of thin super glue in that square area and hold the trailer at about a 45 degree angle, with the rear facing up. This will allow the super glue to run the entire length of the trailer side to roof joint. If you want, I'll take a pic of the area I'm talking about for you. Thanks for the advice Highway. It would be great if you could shoot me a pic of the area you are talking about . Chris Quote Link to comment Share on other sites More sharing options...
Rick Posted November 10, 2010 Share Posted November 10, 2010 I'd still like to join!! Not sure what to build, maybe a nice resin B model Mack on a DM 600 frame? Still trying to get the winter toys prepped for the season. I should be done by next week and start on this soon after. Thanks, Rick Quote Link to comment Share on other sites More sharing options...
highway Posted November 10, 2010 Author Share Posted November 10, 2010 Thanks for the advice Highway. It would be great if you could shoot me a pic of the area you are talking about . Chris Sure thing, Chris, I will get a pic later today for you. Quote Link to comment Share on other sites More sharing options...
highway Posted November 10, 2010 Author Share Posted November 10, 2010 I'd still like to join!! Not sure what to build, maybe a nice resin B model Mack on a DM 600 frame? Still trying to get the winter toys prepped for the season. I should be done by next week and start on this soon after. Thanks, Rick Sure thing, Rick, I'll add your name to the list, and the B model sounds like a great idea. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.