Thanks in advance,
Rick
0
Weathering
Started by Rick, Aug 05 2006 01:59 PM
7 replies to this topic
#1
Rick
-
- Members
-
- 128 posts
MCM Friend
- Location:SLC
Posted 05 August 2006 - 01:59 PM
Hi Everyone, Just a quick question........Looking at some of the pictures here, I can see some of you have truly mastered weathering. I would Love to learn to do that!! I have done a few searches, and found a bunch of different books on the subject. My question is, Which books would be most helpful and which ones should I avoid? Any help here would be Great!!
Thanks in advance,
Rick
Thanks in advance,
Rick
#2
Guest_zebm1_*
Guest_zebm1_*
-
- Guests
Posted 05 August 2006 - 02:07 PM
Hey Rick, check with FineScale Modeling always has weathering articles and yu can purchase back issues and special issues online at <Kalmbach.com>. In this magazine yu'll find articles written by sum of tha denizens that hang out in here. :roll:
#3
BIGTRUCK
-
- Members
-
- 788 posts
MCM Ohana
- Location:Wood Dale Illinois
- Full Name:Ken Krawiec
Posted 05 August 2006 - 03:07 PM
The weathering I use is water clean-up, Poly Scale , found in the Railroad section or Floquil Acrylic is good , I'm not an expert at this but try a little on an old build and practice...
#4
KT EASTMAN
-
- Members
-
- 194 posts
MCM Friend
- Location:Colorado Springs Colorado
Posted 06 August 2006 - 07:54 AM
All I can say is Ken Hamilton, Ken Hamilton, Ken Hamilton!!!! He is in my opinion one of the best when it comes to weathering!! If you see an article with his name, it is worth its weight in gold when it comes to techniques!!! There is a product out there called Rustall. www.rustall.com This stuff works great if you are looking for that rusty look!!! Check around and see if you have a railroad hobby store near you. They usually have the paints and supplies for weathering!! I have learned alot from Ken over the years, but I have also done alot of experimenting on my own!!! I will usually study pics. of weathered cars to see where they rust, etc. Heres a good site to see alot of rotting musclecars www.carsinbarns.com I hope this helps!!!! KT
#5
KT EASTMAN
-
- Members
-
- 194 posts
MCM Friend
- Location:Colorado Springs Colorado
Posted 06 August 2006 - 07:58 AM
Oh...by the way, here is one of my dioramas inspired by Ken Hamilton!!!
#6
Rick
-
- Members
-
- 128 posts
MCM Friend
- Location:SLC
Posted 06 August 2006 - 02:36 PM
Thank you for your replies, I'll look into those idea's very soon. Those are some great models guys, I grew up in the middle of the rust belt, and have seen many, many cars that looked just like that Bonneville!! (I've even owned a few 
) You nailed the look perfectly!!
Thanks Again,
Rick
) You nailed the look perfectly!!Thanks Again,
Rick
#7
PatRedmond
-
- Members
-
- 1,437 posts
MCM Ohana
- Location:Windsor, Ontario.
Posted 06 August 2006 - 03:30 PM
From what i've seen and heard, a LITTLE weathering goes a LONG way.
#8
KT EASTMAN
-
- Members
-
- 194 posts
MCM Friend
- Location:Colorado Springs Colorado
Posted 06 August 2006 - 04:21 PM
Thanks for the compliment Rick!! It was an "Inspired" build!!!!Thank you for your replies, I'll look into those idea's very soon. Those are some great models guys, I grew up in the middle of the rust belt, and have seen many, many cars that looked just like that Bonneville!! (I've even owned a few
Thanks Again,
Rick
