4 replies to this topic

[BRIAN46]

How do you determine what size tire & wheels you have in a kit. If there is any references for this let me know . Thanks

Brian46

[shadetree]

Brian,
First read the sidewall of the kit tire. This should get you in the ballpark. I have found most kit tires are pretty close to the stated size.
As an example a 1:1 P225-70R15 is 225 millimeters wide with a 157.5mm high sidewall (70% of width) to fit a 15 inch rim. Also the P stands for
passenger. An LT would be light truck. So in 1/25 that tire is 9mm wide with a 6.3mm sidewall fitting a rim about 9/16 in diameter.
For the older alpha-numeric (G70/15) contact your local tire store for a conversion chart or maybe Coker Tire on the web.
For plain sidewall generic tires measure the tire and multiply by whatever scale your useing.
Hope this helps,
Marc

[Rider]

To do the math on percetages for the side wall hight you cross multiply. For a 225/70R15 you'd mulitply 70x225 and divide by 100 then do you scale math.

Edited by Plastic Freak, 01 February 2010 - 03:03 AM.

[BRIAN46]

Brian,
First read the sidewall of the kit tire. This should get you in the ballpark. I have found most kit tires are pretty close to the stated size.
As an example a 1:1 P225-70R15 is 225 millimeters wide with a 157.5mm high sidewall (70% of width) to fit a 15 inch rim. Also the P stands for
passenger. An LT would be light truck. So in 1/25 that tire is 9mm wide with a 6.3mm sidewall fitting a rim about 9/16 in diameter.
For the older alpha-numeric (G70/15) contact your local tire store for a conversion chart or maybe Coker Tire on the web.
For plain sidewall generic tires measure the tire and multiply by whatever scale your useing.
Hope this helps,
Marc

Thanks for all the information. Very helpful. Brian

[BRIAN46]

To do the math on percetages for the side wall hight you cross multiply. For a 225/70R15 you'd mulitply 70x225 and divide by 100 then do you scale math.

Thanks for the information. Time to get out the calculator. Brian