Jump to content


You Say You Want a Spray Booth, Do Ya?


  • You cannot reply to this topic
72 replies to this topic

#1 Dr. Cranky

Dr. Cranky

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 15,418 posts
  • Location:Transylvania, Florida
  • Full Name:Virgil "Doctor Cranky" Suarez

Posted 13 January 2011 - 04:54 AM

Enjoy and be inspired: (PLEASE NOTE): the following is intended for adults and adults only who are capable of exercising common sense and judgement. Please consider the following keeping safety and local regulations in mind. Also, remember that there are spray booths ready-made by professional companies that you can turn to, etc)



If you don't want to take the time, safety risks, etc, then here's a video that will inspire you to want to airbrush just the same:


Edited by DamnCranky, 13 January 2011 - 10:01 AM.


#2 Dr. Cranky

Dr. Cranky

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 15,418 posts
  • Location:Transylvania, Florida
  • Full Name:Virgil "Doctor Cranky" Suarez

Posted 13 January 2011 - 05:02 AM

Here's another approach:



#3 publicsafety

publicsafety

    MCM Regular

  • Members
  • PipPipPip
  • 66 posts
  • Location:Canada
  • Full Name:Chris MacK

Posted 13 January 2011 - 05:22 AM

Well this is one of the best, informative post I've seen on DIY spraybooths ;) . Thanks guys I have been pondering how to do one in my set up and I think I will use parts from both ideas. I love the fan and the pocket lights. Can't wait to get off work and build my own! :unsure::) :D :D

Edited by publicsafety, 13 January 2011 - 05:22 AM.


#4 GTMust

GTMust

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 1,018 posts
  • Location:Belleville, Ontario, Canada
  • Full Name:Tony Durham

Posted 13 January 2011 - 05:41 AM

Thanks for this Virgil. I really need to get off my a.. and make myself a spray booth. These videos have given me some great ideas.

Tony

#5 cruz

cruz

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 4,620 posts
  • Location:Maryland
  • Full Name:Marcos Cruz

Posted 13 January 2011 - 05:47 AM

As usual Virgil, thanks for the videos and inspiration. Not a very strong fan and system but for starters is pretty good! :rolleyes:

#6 Dr. Cranky

Dr. Cranky

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 15,418 posts
  • Location:Transylvania, Florida
  • Full Name:Virgil "Doctor Cranky" Suarez

Posted 13 January 2011 - 06:02 AM

I think the idea is to custom make your own, so get stronger fans, accessories. Personally I would get a white plastic bin, as large as possible and then get some airconditioning filters and use them in front of the fan. It will help keep the overspray down!

#7 cruz

cruz

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 4,620 posts
  • Location:Maryland
  • Full Name:Marcos Cruz

Posted 13 January 2011 - 06:11 AM

I think the idea is to custom make your own, so get stronger fans, accessories. Personally I would get a white plastic bin, as large as possible and then get some airconditioning filters and use them in front of the fan. It will help keep the overspray down!

I agree with you brother, definitely stronger fans but, by sharing this, you have given people more ideas and options on how to go around doing their own booths. Thanks again bro!!! :rolleyes:

#8 Dr. Cranky

Dr. Cranky

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 15,418 posts
  • Location:Transylvania, Florida
  • Full Name:Virgil "Doctor Cranky" Suarez

Posted 13 January 2011 - 06:19 AM

Sharing is the whole idea, amigo. And yes, YOUTUBE trolling often pays off! :rolleyes:

#9 JamesW

JamesW

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 1,971 posts
  • Location:Jackson, Michigan
  • Full Name:James WastaWTF

    Curb Appeal M.C.C. President

Posted 13 January 2011 - 06:41 AM

Great ideas. Now that I have a "shop" big enough to accomodate a booth I think I'm gonna try making one.

#10 Dr. Cranky

Dr. Cranky

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 15,418 posts
  • Location:Transylvania, Florida
  • Full Name:Virgil "Doctor Cranky" Suarez

Posted 13 January 2011 - 06:45 AM

Those of you who might ending building one, please feel free to share your results!

#11 edward smith

edward smith

    MCM Friend

  • Members
  • PipPipPipPip
  • 197 posts
  • Location:Maine
  • Full Name:Edward

Posted 13 January 2011 - 07:10 AM

Thanks for the heads up on this, I think I will be trying it some time.

#12 ra7c7er

ra7c7er

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 1,000 posts
  • Location:Shiloh, IL
  • Full Name:Robert Roach

Posted 13 January 2011 - 07:49 AM

I used to build spay booths out of cardboard and would use computer case fans. Nothing beats 2 100 CFM fans and I would use a metal filter used on range hoods with a piece of foam filter material behind that. Two computer case LED lights in the top corners of the box provided lights and it worked great but like the guy said cardboard doesn't last long but when it costs you less than 5 bucks to put together it is cost effective. It was a little loud by computer case standards at 50 Db but it moved a ton of air



A RC track and shop I worked at in Indianapolis custom built a spray booth using 12 50 CFM fans with a furnace filter. The entire back wall was fans and it blew directly out a window.

Anyone who wants a spray booth and builds model cars can easily make your own. The little bit of electronics is a bit daunting when you first look at it but in reality it's pretty easy.

Edited by ra7c7er, 13 January 2011 - 08:01 AM.


#13 KingSix

KingSix

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 597 posts
  • Location:Woodstock , GA
  • Full Name:Dan Barrett

Posted 13 January 2011 - 08:57 AM

OK, so my brother was just over, and I had to show him these ... He's been an Electrician for nearly 35 years. Bathroom fans are to a degree "sealed" but not in the way necessary for painting, they are not designed for constant exposure to paint fumes and buildup.Nor are PC fans. These are TIME BOMBS, completely and totally unsafe. There is a reason actual spray-booths both full size and hobby size are expensive. They have the proper SEALED fan motors and electrical connections. All it takes is one spark and someones going to the ER or worse. There are young kids on here, this post should be taken down before somebody gets hurt. There are places you can cut corners if that's how you choose to do things, this is not one of them ... seriously ? hardwired lights ? battery operated LED tap lights are a much safer alternative and undoubtedly cheaper. Seriously, the mods need to delete this before there's an injury...

Edited by KingSix, 13 January 2011 - 09:04 AM.


#14 ra7c7er

ra7c7er

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 1,000 posts
  • Location:Shiloh, IL
  • Full Name:Robert Roach

Posted 13 January 2011 - 09:08 AM

OK, so my brother was just over, and I had to show him these ... He's been an Electrician for nearly 35 years. These are TIME BOMBS, completely and totally unsafe. There is a reason actual spray-booths both full size and hobby size are expensive. They have the proper SEALED fan motors and electrical connections. All it takes is one spark and someones going to the ER or worse. There are young kids on here, this post should be taken down before somebody gets hurt.




People have been building these for years. My step dad is a electrician also and he has helped me build them in the past. If you build it correctly there is no more of a chance for it to catch fire than for your house to catch fire. It's all plugging wires in. The sealed motor vs. exposed posses little risk to anything. The only thing I have ever seen happen is the exposed motors will get gummed up with paint and stop working if not properly filtered. Per what you are saying nobody should use computers because they use the same connections and fans.

I build computers for friends and I have been taught some electrical work by my step dad.

Also nothing in either of the two videos were hard wired I am not sure what you are talking about.

Edited by ra7c7er, 13 January 2011 - 09:30 AM.


#15 MikeMc

MikeMc

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 4,577 posts

Posted 13 January 2011 - 09:17 AM

Bob...Dan isn't talking about bad wiring...Its called a flash fire when lacquer fumes explode due to the open motor.......

#16 KingSix

KingSix

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 597 posts
  • Location:Woodstock , GA
  • Full Name:Dan Barrett

Posted 13 January 2011 - 09:22 AM

People have been building these for years. My step dad is a electrician also and he has helped me build them in the past. If you build it correctly there is no more of a chance for it to catch fire than for your house to catch fire. It's all plugging wires in. The sealed motor vs. exposed posses little risk to anything. The only thing I have ever seen happen is the exposed motors will get gummed up with paint and stop working if not properly filtered. Per what you are saying nobody should use computers because they use the same connections and fans.

I build computers for friends and I have been taught some electrical work by my step dad.

Really ? You spray flammable chemicals at your computer fans ? That's what you're saying in essence. I build my own PC's as well and a spray booth has not thing one to do with a PC. I am however a professional body tech. Familiar with the laws an regs involved in a full scale paint booth, both in design and operation. The laws are in place for a reason. You said it yourself, " The only thing I have ever seen happen is the exposed motors will get gummed up with paint and stop working if not properly filtered". Do you have any clue how dangerous that actually is ? Point of fact, this IS dangerous, and having it posted here where young kids have access to it is irresponsible.

#17 Dr. Cranky

Dr. Cranky

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 15,418 posts
  • Location:Transylvania, Florida
  • Full Name:Virgil "Doctor Cranky" Suarez

Posted 13 January 2011 - 09:25 AM

Obviously, safety IS a concern, so you have to get the right equipment, but the idea behind my posting these was to spark (no pun intended) the imagination to build something that works and that is safe and that will help you get the job done.

#18 Dr. Cranky

Dr. Cranky

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 15,418 posts
  • Location:Transylvania, Florida
  • Full Name:Virgil "Doctor Cranky" Suarez

Posted 13 January 2011 - 09:31 AM

I am sure the moderators here know exactly how many "kids" are participating on this forum. And they would also know how old they are. I am willing to bet that at least a high percentage of us here are adults. And so when I posted this I was simply trying to get ideas across to other adults who I assume are quite capable of using common sense, etc . . .

AND YES! SAFETY IS IMPORTANT.

There are also ready-made spray booths on the market.

Edited by DamnCranky, 13 January 2011 - 09:38 AM.


#19 KingSix

KingSix

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 597 posts
  • Location:Woodstock , GA
  • Full Name:Dan Barrett

Posted 13 January 2011 - 09:38 AM

I agree with your theory 110%. Its a great idea, and it can be done, but not for $30, and certainly not safely for $30. Have you priced a sealed fan motor lately ? The plastic bins alone are a bad idea. They are designed to "contain". And contain they will, even fumes. When the motor becomes gummed up with over spray, and it will, they will heat up, the bins by design will contain the fumes, thus the recipe for a time bomb. Especially with your longer , deeper plastic bins. I would no sooner have one of these in my home than a rabid Hyena, but to each your own. I am making a point from a parents point of view, kids should not do this. This post should be taken down or at the very least edited so that kids who see should be made aware this is not a simple home project, and should be done only with an educated adults supervision.

#20 charlie8575

charlie8575

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 6,628 posts
  • Location:Marlborough, Ma.
  • Full Name:Charlie

Posted 13 January 2011 - 09:45 AM

I agree that I might use a squirrel-cage blower in place of the little bathroom fan, but the basic idea is great. I never would've thought to use a Tote-Box or something similar for a spray booth.

Squirrel cages can be found in your local shoppers and Craigslist inexpensively.

Charlie Larkin