Jump to content


1925 Model T farm truck


  • You cannot reply to this topic
22 replies to this topic

#1 GTMust

GTMust

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 1,018 posts
  • Location:Belleville, Ontario, Canada
  • Full Name:Tony Durham

Posted 25 March 2011 - 11:50 AM

I thought I'd already done a WIP on this....... I must be getting old........ I can't find it. Anyway, if I did, forgive me for repeating myself and I've brought it up to date as of today.

The concept is a 25 T that had been abandoned after a crash, recovered by an old farmer and turned into a farm truck to replce poor old "Dobbin" the long suffering horse. It's set in a time period sometime in the mid thirties and has seen a lot of hard work around the farm.

Here's what I started with, a really worn out old AMT 25 T coupe body and fenders that I found in a junk box at a thrift store.

Posted Image

Cut it into three sections, discarded the middle piece and glued the other two back together. Also cut off the fenders for a future junkyard dio.

Posted Image

Posted Image

I stole the new fenders, chassis, hood and other missing parts from a new 25 T "3 in 1" kit and built a tilt bed for the back.

Posted Image

Posted Image

a couple of primer coats and it's ready for finish coat and some weathering.

Posted Image

Now it's pretty much finished, except I still have to add wiring and hoses to the engine and a couple of other small details before it goes "under glass". I built a quick dio base of a muddy farm track and will add a fence, weeds and other details, but meanwhile it brings the model a little more alive.

Suggestions and comments always welcome and taken in the spirit in which they are given. Hope you like it:

Posted Image

Posted Image

Posted Image

Posted Image

#2 Harry P.

Harry P.

    MCM Ohana

  • Administrators
  • PipPipPipPipPipPip
  • 22,378 posts
  • Location:NW suburban Chicago
  • Full Name:A mere layman...

Posted 25 March 2011 - 01:37 PM

It looks very good, but I'd say the wooden parts need weathering. The wood is much too light and clean; I'd use some stain on the wood and then add some dirt and wear.

#3 Nick Winter

Nick Winter

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 4,926 posts
  • Location:Whitby,Ontario, Canada
  • Full Name:Nicholas J. Winter

Posted 25 March 2011 - 02:06 PM

Wow that looks Great Tony, Can you maybe explain how you did the base, something like that might work for my Bel Air.

Nick

#4 pepperdrumstix

pepperdrumstix

    MCM Friend

  • Members
  • PipPipPipPip
  • 143 posts
  • Location:Phoenix, Arizona
  • Full Name:Patrick Mitchell

Posted 25 March 2011 - 03:46 PM

Excellent save of a mostly ruined old kit. I love old trucks and try to build them as often as I can. Nice weathering on the body and it looks like what a frugal but talented farmer would create to save money and to get the farm work done. Fine little dio base too. Harry is right the wood does look too new to fit with the truck but Hey, the farmer could have replaced it already after the original wood wore out. Good job and a very interesting build. Maybe think about a hitch on the back somewhere to pull a hay trailer to feed livestock or other farm equipment. Just a thought. I spent many summers on one of my uncles farms in Ohio. Almost drove a small tractor through a barn when the throttle stuck. Thanks for the post and photos, Patrick M

#5 Olds Rocket 88

Olds Rocket 88

    MCM Friend

  • Members
  • PipPipPipPip
  • 187 posts
  • Location:pennsylvania usa
  • Full Name:Ron Crowl

Posted 25 March 2011 - 06:07 PM

Very nice, you have a great imagination to save an old body and come up with something so cool !!

#6 Danno

Danno

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 12,713 posts
  • Location:Okay. By now you all know ~ Aridzona.
  • Full Name:Nameless Natural Luminary

Posted 25 March 2011 - 08:24 PM

That's interesting!



;)

#7 Modelmartin

Modelmartin

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 2,836 posts
  • Location:No matter where you go...
  • Full Name:Mr. Yuk

Posted 26 March 2011 - 01:33 AM

Very fun model! You give the old farmer too much credit for doing such sophisticated bodywork! :rolleyes: Most would have sawed it off at the doorline and left it!

#8 GTMust

GTMust

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 1,018 posts
  • Location:Belleville, Ontario, Canada
  • Full Name:Tony Durham

Posted 26 March 2011 - 04:15 AM

Thanks guys. Great comments and suggestions. Much appreciated.

Harry: I agree about the weathering of the wood. I did think about more rustic, weathered boards but wasn't sure how to achieve it, so I left it for now. I'm going to experiment with a few ideas to achieve the look you suggested.

Nick: First I trowelled on a layer of white spackle where the track would be. While it was still drying, I dabbed at it with a bunched up paper towel; then rolled a spare wheel from the kit, guided by a steel straight edge ruler, along the wheel track location. I then flooded the whole base with a watery wash of light tan (and a little black) dollar store acrylic craft paint (the same stuff I used to add the muddy look to the truck). White glue straight from the bottle was spread over the grass area and model railway "grass" sprinkled over that. The grass cover will need more work with different colors and grades to look more realistic. The whole base took about half and hour to make but adding additional details will probably take a lot longer!

Modelmartin: I think the farmer had a son who was learning the trade as a body man?....... Or maybe not!

Now to find another thrift store junker!

#9 Tony T

Tony T

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 2,628 posts
  • Location:Greely ON Canada
  • Full Name:Tony

Posted 26 March 2011 - 04:28 AM

Nice save, Tony! Well done!
As to the weathering of the wood, that can be done at another time, and it won't be hard to find some old wood outdoors to see what our Canadian weather does to wood that is left outside! Amazing also what a simple base can do to add to "the story". Nicely done!

#10 mnwildpunk

mnwildpunk

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 1,901 posts
  • Location:Minneapolis
  • Full Name:Dave isle

Posted 26 September 2013 - 10:36 AM

I really really like this build I'm building a pretty close to T. and I like what you have done here

#11 ChrisBcritter

ChrisBcritter

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 790 posts
  • Location:Northbrook, IL
  • Full Name:Christopher Brame

Posted 10 October 2013 - 11:21 AM

Don't bother weathering the bed - just scatter some bits of wood and a few tools like a saw and a hammer, and there you go - Farmer Brown just finished and went home for vittles. Maybe add "This End Up" to one of the slats (upside down, of course :rolleyes: ).


Edited by ChrisBcritter, 10 October 2013 - 11:23 AM.


#12 Agent G

Agent G

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 3,701 posts
  • Location:Las Vegas
  • Full Name:Wayne Gray

Posted 10 October 2013 - 02:56 PM

Looking good!

 

Take some neutral gray acrylic paint, thin it way out with something like isopropyl alcohol and lightly brush it on. You get a nice gray/tan patina like weathered bare wood. 

 

Don't soak the wood, it will prevent warping and dry faster.

 

G



#13 Ramfins59

Ramfins59

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 2,866 posts
  • Location:Cranberry township pa
  • Full Name:Richard Manson

Posted 10 October 2013 - 03:30 PM

Tony, try finding some stuff called Weatherall at a well stocked HS.  It gives wood a grayish weatherworn look.  It brushes on easily and the more you apply the more weathered the wood will look.



#14 Danno

Danno

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 12,713 posts
  • Location:Okay. By now you all know ~ Aridzona.
  • Full Name:Nameless Natural Luminary

Posted 10 October 2013 - 05:31 PM

Fine flivver!



#15 Tom Geiger

Tom Geiger

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 5,279 posts
  • Location:Exton, PA
  • Full Name:Tom Geiger

Posted 11 October 2013 - 05:09 AM

On weathering the bed --   you can stain it with a number of things, from the muck in the bottom of your thinner jar, to products specifically made for this. I've used actual Minwax stain as well.  Another thing I've done is taken a jar of  Polly S acrylic flat brown and just used the thin stuff on the top of the bottle to use as stain... you know, the stuff at the top before you shake it.  And a final thought, some guys were using soy sauce for stain.  You could probably do that with one restaurant packet!

 

Keeping in your theme, I think your farmer would have made the bed from old wood. So I'd mess up the edges and give it some gauges.  You can add knot holes by drilling a hole and inserting a tooth pick in it. Cut it off and sand it flat, and you'll have a convincing knot hole.   Keeping with the used wood theme, I'd paint at least one board red, as if salvaged from an old barn.  Oh, and nails can be fudged simply by adding a Sharpie black dot where they should be!  

 

Cool model, great save and I'll be looking forward to seeing what you do with the bed!



#16 Dinky

Dinky

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 649 posts
  • Location:The Netherlands
  • Full Name:Arno vd Schoor

Posted 13 October 2013 - 04:49 AM

Impressive, like the diorama also.

#17 Shardik

Shardik

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 764 posts
  • Location:Greeley, Colorado
  • Full Name:Johann H. Buerfeind V

Posted 17 October 2013 - 11:54 AM

Great build and creative save.

Re.: weathering the wood, there is a great product called "Weather-it" which is intended for this very purpose.  It imparts a very natural looking weathered appearance with very little (if any) warpage, as long as you apply it to both sides of the wood.  I used it on the bed of my '37 Ford 4x4 conversion, and was very pleased with the results.



#18 crazyrichard

crazyrichard

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 3,888 posts
  • Location:netherlands on styrene clogs
  • Full Name:richard gelens

Posted 17 October 2013 - 10:31 PM

awsome !! love it :)
and yes that wood needs some coats of stain and some filth haha :)

#19 Edward Gore

Edward Gore

    MCM Avid Poster

  • Members
  • PipPipPipPipPip
  • 383 posts
  • Location:Easter Island
  • Full Name:Pacific Ocean

Posted 21 October 2013 - 12:51 PM

Cool unique little vehicle. 

Build, paint and weathering look great.



#20 Eshaver

Eshaver

    MCM Ohana

  • Members
  • PipPipPipPipPipPip
  • 3,870 posts
  • Location:Richmond Virginia for now
  • Full Name:Ed Shaver

Posted 21 October 2013 - 02:25 PM

I likes it , Not too concerned with what the neighbors said bout it ........................