42 replies to this topic

[thesnake87]

Much like other community builds, this one is more of a show off as well. No timeline for it, just as long as you stay in the requirements you're good to go!

Requirements
- Graphics cannot be out of the box (You can mix and match out of the box decals, but it has to be from your own vision, doesn't need to be much, but a number and 1 sponsor have to be visible)
- You can use any type of racing
- It can be any scale, any era, any make and model that is not excluded. You could make a custom 69 Camaro racer, or a Pagani Zonda. Use your imagination.


Here is the list of entries. Just post what you are going to build and I will update this!

Note* - When you are finished and post a finished picture of your car (as in taking one like this where we can see most of the car detail) I will put it in a spoiler under your name so viewers can see them better. Once we get a few finished models I will post the display thread in the "Under Glass" forum.

You may also have as many entries as you wish, but 1 is fine too

Entries
The Snake 87 - '06 Shelby GT-H American LeMans protoype
PeterC - Mercedes SLS GT3
W409 - '67 Dodge Charger D/Street Drag Racer
Nick Winter - '78 Dodge D150 Baja truck

Edited by thesnake87, 29 May 2011 - 11:14 AM.

[Jantrix]

Requirements
- You can use any type of racing except drag racing, NASCAR, or F1/Indy Car body styles.

May I make a suggestion? I've been around a while and seen hundreds of CBP's start and never get much interest. The reason for this? The scope is made too narrow. The thread originator wants people to build something similar to what he has in mind and sets a tight set of rules. There might be just a few people who have an interest in that particular genre. And with life and it's endless diversions keeping us away from the bench, nothing comes of the CBP with just those few people.

As I'm not a circle track or open course racing fan, I've no idea what you should do to open the field up more, I'm just throwing the idea out there. Good luck with the CBP. I look forward to seeing what you've got in store.

[PeterC(MrMondeo)]

i will enter with my Mercedes SLS GT3 build if thats ok ? Bassed on the revell kit

This is what im/will be doing ;

[highway]

May I make a suggestion? I've been around a while and seen hundreds of CBP's start and never get much interest. The reason for this? The scope is made too narrow. The thread originator wants people to build something similar to what he has in mind and sets a tight set of rules. There might be just a few people who have an interest in that particular genre. And with life and it's endless diversions keeping us away from the bench, nothing comes of the CBP with just those few people.

As I'm not a circle track or open course racing fan, I've no idea what you should do to open the field up more, I'm just throwing the idea out there. Good luck with the CBP. I look forward to seeing what you've got in store.

I'm sorry, but I have to agree with Rob. In my opinion, a narrow subject and restrictive rules is just a doom for failure, or at least not many participants. Even though I do enjoy all forms of motorsport, the DP/GT racing like ALMS is one I just don't follow heavily enough to even think of building models of, and the only thing I even have on the shelf out of 450+ kits is a Corvette C5R, and I can't even build it for this because it is a specific car (Dale Earnhardt Sr's 2001 car in the 24 Hrs of Daytona) and there is no way it will be altered for any reason.

This is just my opinion, but consider letting all forms of motorsports enjoy the build, after all you did call it a "Racing Community Build"!

[thesnake87]

I kept in mind that I would have to probably consider opening it up to all forms... so I guess I might as well now. I'll fix the rules

[W-409]

Requirements

- You can use any type of racing

Now sounds lots of better. I think, that I might jump in. Is there any deadline? If there is not, then count me in with '67 Dodge Charger D/Street Drag Racer. Interesting community build, hope this gets many entries.

[thesnake87]

Nope no deadline, and no limit to amount of entries either. This hopefully can become like a large photo collaboration after a while and I'll edit you in

[bandit1]

NO TIMELING!, OPEN TO ALL RACING!

then count me in as well ill have to look and see what is in "DA' STASH!"

[thesnake87]

Sounds good! Just don't forget to post what you're gonna make

[W-409]

Here it goes! The start of my '67 Charger. This is Revell's kit, and it's great quality. There are some option parts too, like 9" slicks, but I'm not going to use them, I'm using bit bigger ones. I found also a good blower for this car from my parts boxes. Engine is going to be 426" Hemi, the one which came with the kit. The quality looks very good on that too. I painted the engine block already orange. I painted also the oil pan and the timing chain cover and waterpump.

[thesnake87]

Nice kit! I've been painting most of my aluminum parts, so my parts don't have too much detail yet... lol

This is what I have so far for the frame



I need to add more bars to it, most like I'll make one that surrounds the driver like in most cars instead of just a A type one. I need to file down the joints too once I get done, but I want to keep them so they have that welded pipe look. As it stands it doesn't look exactly like a Grand Am/Daytona style car, but I hope to get closer soon

I have more done of course, but this is all I took pics of as of now. I won't be home until Monday though to do any more work

EDIT: I was looked around more for 1:1 comparison cars... I found this RC car



That pretty much sums up what I want to do besides the decals, mine will be much more complete in terms of that. But the spoiler is exactly what I need... lol


My little checklist per say of things to complete soon.

- Lower ride height
- Scratch build a small ground effects kit
- Find paint color for exterior (I was gonna do a half aluminum half black combo, but I think I'm gonna use red or blue instead, the aluminum I got looks like chrome)
- Finish roll cage

Edited by thesnake87, 28 May 2011 - 06:17 AM.

[Nick Winter]

Hmmm,no deadline, I might be able to make that if I try really hard

On a serious note, Can I play too? I've got a '78 Dodge D150 Baja truck I've started on as part of the Winter's & Sons Motorsports team.

Nick

[thesnake87]

updated* still would love more entires

[Nick Winter]

In that case.





Nick.

more to come.

[thesnake87]

I hope I'm not doing my roll cage "wrong" by building it in place... I see you guys are building them separate. I hope I'm not screwing myself lol

[Nick Winter]

I hope I'm not doing my roll cage "wrong" by building it in place... I see you guys are building them separate. I hope I'm not screwing myself lol

I'm actually doing the same as you, just pulled it out for the picture.

Nick

oh here's how my graphics will look.

[thesnake87]

Alright phew lol

Nice graphics, you're more planned in that aspect than I am. I just need some rally numbers then I'm just gonna put on whatever I think fits... in a sense lol

[W-409]

A little update to Charger. I added cylinder heads, valve covers and blower manifold to the engine. The manifold was quite hard to find, but that one fits fine. Blower is painted silver, because I didn't like the chrome on it. Valve covers were also chromed, but the black paint on them looks better in this engine. Next step is spark lug wires, they are coming from Scale Dreams' wire, as usual. Let's see, when this build continues.

[thesnake87]

Nice job! Spark plug wires are a good idea... I should look into getting some along with a seat belt harness and some mesh.

[W-409]

Thanks, Jake! Little details make the model look very good. This build will also get seat belts, but Street D race car doesn't need a mesh to the driver's side window. Now the ignition wires are installed to the distributor... I got one distributor already done for the engine and then I just heard "zinggggggg"... (A voice of a small distributor flying off from the tweezers... I didn't find that part, so I built another one ready and installed that one. Now the ignition wires are also on their place in the distributor.