Scratch Building an Aussie Ford Falcon **First update for 2014**
Posted 10 February 2012 - 05:13 AM
Posted 10 February 2012 - 05:53 AM
Fantastic, keep it going.
Posted 10 February 2012 - 06:01 AM
Posted 10 February 2012 - 06:04 AM
Posted 10 February 2012 - 07:35 AM
Keep up the FANTASTIC work!!
Posted 10 February 2012 - 08:24 AM
YOU Sir, are NOT just a modeler, but an ARTISTE! Once had some clown tell me HE was an Auto REPLICATOR, NOT a builder. Well, compared to YOU, he's a NOTHING! This is gotta be one of THE COOLEST things I've EVER seen done! You got talent up the ol wazoo!!! I am LOVEING this, please don't stop with the tute, it's going GREAT. I can only WISH to do stuff this cool! You see, YOU ARE a Auto REPLICATOR, and NOT just a builder!!! GREAT job,Mate. Are ALL you Oz guys THIS talented??? Check out Greg Armours big scale 69 Pro Mod Camaro. Wats in the water there????????? Love this thread!!!!!
You said it all George!!! WOW!!!
Posted 10 February 2012 - 12:07 PM
Posted 10 February 2012 - 01:04 PM
One way or another, grat project and I am looking forward how it'll turn out once on wheels.
I love those cars, have the European versions myself:
This lady is the lamest version with only 75 BHP out of a 1,6 litre Pinto Engine, but it was my daily driver for the past 3 years and almost 50 thousand miles, it was replaced with a Granada Mark I with a bit more power (2,6 litre V6) that I built over the summer:
Since september the black car is my daily driver while the white one waits for a deserved rebuild back to it's former glory.
And there are parts from Granada that'll fit the Falcon. Aussie V8's are plug and play ...
Edited by Mr.Zombie, 10 February 2012 - 01:06 PM.
Posted 10 February 2012 - 08:10 PM
WOW!!! Great work for sure....are you going to cast it??? Seems like a lot of wok for just one!!!
Thanks Dave. I will be casting it as I want to make various versions. Especially this one
greens_tuf_01a.jpg 76.67KB 8 downloads
Thanks for your support and kind comments guys. There is still plenty more to show you. such as;
I cut out two basic shapes from evergreen sheet.
i cut the centre out of the bottom roof piece. This will allow me to have the roof curve inwards on the inside.
I glued that to the top piece and filled it with putty and sanded it smooth. You can see the curve if you look at the pencil line.
You can also see the grooves that I scribed near the outside edges that will help locate the roof onto the body. You can see the extra area of styrene above the window frames that will mate up to the roof.
I sanded it to shape and added the rear window blank.
To get the rounded off contour on the roof top I added some thin evergreen sheet sections covered them with putty and sanded to shape.
To be continued..
Posted 11 February 2012 - 02:38 PM
What are you planning for the head and tail light areas?
Posted 11 February 2012 - 08:07 PM
Then I moved on to the window trims. I used two different width layers of very thin evergreen strip and did around all of the windows.
Made some mirrors too.
To be continued..
Posted 11 February 2012 - 08:37 PM
That's it for the body for now. I now turned my attention to the chassis. That's where the real work and detail commenced.
I wanted to use the chassis from Monogram's Talledega as it had all the detail that I wanted but it was too big for my needs. So I searched through my stash and found a chassis from R/M's '64 Mustang. The Mustang chassis fit with just a few areas that needed trimming but it needed a complete make over.
I removed the rear section and sanded off the detail from the main underbody.
I re-made the whole rear section with different shaped chassis rails that will suit the trailing arm and watts linkage suspension. You can also see the detail returning to the main underbody area.
The spare wheel well was made from a section of a plastic tire from a Fujimi kit and was detailed with some evergreen.
The fuel tank was also made from thick evergreen sheet and was sanded to shape.
Made a heat shield that goes between the tank and the spare wheel well.
Coming up next will be the rear suspension and diff.
To be continued..
Posted 11 February 2012 - 09:19 PM
Posted 11 February 2012 - 09:32 PM
This is the kind of building I love to see. It is awesome. So much work going unseen here. Not only do you have an eye for the proportions etc. but are putting the work in required to turn out something like this. Really nice. Can't wait to see more.