1962 Chevy II "Runt"
Posted 17 October 2012 - 04:13 PM
Pic 2 Now look at what the tape does on top of the door gard the textur is show'n even more and when it's flat black it will be the same as the real car and not smooth like the window rubber or the paint job
Pic 3 Runt what it looks like under normal light and in a clean paint booth! Shows the bronz to the red real nice.
Posted 17 October 2012 - 04:15 PM
Posted 20 October 2012 - 12:07 PM
Pic 2 and 3 In the next two pics you will see the front and back side of the rim. The rim in the front has all 3 colors and the back is all done in flat black. This gives the shading in the front more 3d affect and helps with the brakes.
Pic 4 Better shot of the door with the door gard and how the flat black shows up to the red on the paint job.
last pic Here is the door's done, It has the arm gard in black that will be two shades, The closer part to the window edge will be in mid gloss black and the inner part will be flat black. This will give it the look of the rubber that is between the door and window frame and then the inner arm gard that is in place.
Posted 22 October 2012 - 12:07 PM
Great job Chas
Posted 22 October 2012 - 04:51 PM
Belts are now done and have to connect them to the roll bar.
Posted 23 October 2012 - 04:39 PM
Pic 2 Here is the back showing the belts are hooked up to the grab bar.
Pic 3 and 4 together. This photo here shows the floor detail the padding under the center consel and also the padding up by the feet area. The pic after will show the real car.
There is the tan padding.
Posted 24 October 2012 - 11:07 AM
Putting the door strap in. Real rubber and bolted in place
Posted 24 October 2012 - 02:30 PM
Pic 2 Showing the front window crank part, Also you can see the secound leather strap on the door just under it.
Pic 3 Showing the back side where the rear window crank was press fitted in so it will hold right.
Posted 25 October 2012 - 02:42 PM
Did the window crank arms today and will do the nobs tomorrow. The front one has also the center cut out of them.
This is showing that the crank arms are off the door padding.
Posted 27 October 2012 - 03:10 PM
Posted 28 October 2012 - 07:38 AM