22 replies to this topic

[Mooneyzs]

Mods.... Is it possible to have this thread Pinned to the top of this section? Thank You

 

 

Hello Fellas.... I have been thinking about doing this for a while because It seems we have a lot of people always looking for what size tubing, Nuts & Bolts, A/N Fittings and Braided Line for race cars. So have have been working on these for the past week developing these tables in an Excel spreadsheet. I had started doing this for myself when I started my Army Vega funny car kit to figure out what I should use to keep things in scale as best as I could But I had never really put them into spreadsheets like these til now. I thought it would be good to share with my fellow modelers here and if it could be of any use to any buddy.

 

I am hoping that maybe the Mods could possibly pin it to the top Here or maybe if I am wrong in putting it in the Drag Racing section they could put it where fitting. I just thought it was fitting for the Drag Racing section because of the typical uses for these materials but its not limited to just drag cars and can be used for any car.

 

I also wanted to let you all know if you are interested in having the Excel file I created just PM me and I will email you the file. I have these all set up on different tabs of the spreadsheet and I had to break them out and turn them in to jpgs so I could post on here. Hope this is helpful to everyone.

 

 

Tubing Sizes:

 

 

 

 

Braided Line:

-Descriptions are from an Earls catalog

 

 

 

Adding more in next few post.....

Edited by Mooneyzs, 19 February 2013 - 04:44 PM.

[Mooneyzs]

Scale Hardware, Nuts & Bolts:

 

Threaded Hex Bolts:

 

 

 

 

 

 

Threaded Hex Nuts:

 

 

 

 

 

 

 

 

Simulated Hex Bolts

 

 

 

Simulated Hex Nuts:

 

 

[Mooneyzs]

RB Motion A/N Fittings:

 

 

Fittings P/N 1518 -1519

 

 

 

 

Fittings P/N 1520-1525

 

 

 

 

 

 

Fittings P/N 1526-1528

 

 

Edited by Mooneyzs, 17 February 2013 - 08:12 PM.

[futurattraction]

Wow!  Thast is a great lot of work you've done, there, Chris.  I'm sure it will be really helpful to a bunch of us.

[doggie427]

Beautiful !!! Thanks Chris. Saves me a lot of work doing the math.

[Mooneyzs]

You guys are welcome. I wanted to be able to help my fellow modelers if I could. As I mentioned if you want the excel file so you can print it out just let me know.

[vintagedragfan]

very nice of you Chris, Im going to print these off, thanks bro

[gasser59]

WOW, that was alot of work and I really appreciate having access to them. Thanks for sharing. You da man!!

Edited by gasser59, 19 February 2013 - 03:13 AM.

[crazyjim]

PM sent.  Thanks for doing all the work on some valuable information, Chris.

[Pro Tech]

Great job Chris, I think this will help alot of those looking for the correct sizes to use. Also thanks for referencing our braided line in your listings!

 

Charlie

Pro Tech

[Mooneyzs]

Bill... PM me your email addy and I will send you the file. I also have the RB motion rod ends on there too. I just didnt create pics of them since i havent found all the 1:1 sizes yet.

Brad..thanks buddy. Will send you a copy

Jim...you are welcome

Charlie.... thanks bud. I was thinking it would be helpful too. I stand behind your products. Thank you for supplying the best braided line in the business. Nothing compares to it.

Edited by Mooneyzs, 19 February 2013 - 06:24 AM.

[F/C NUT]

WOW Chris, What a nice thing to do for everybody. I will print these out, cause it will help me out a lot. I get tired of researching for parts

[Davewilly]

Very cool...thanks for the work of the charts!

[Mooneyzs]

You guys are welcome....

Steve i did these for the sane reason lookibg up thibgs all the time lol. I can send the file to you and it woukd print better than the jpg images.

[whale392]

If any Mod happens to cruise through here and see this; is there any way we can get this stickied/pinned somewhere so that we won't have to go digging for it when we need it. Otherwise, all of this effort will go to waste when the questions STILL get asked because this thread falls from page 1?

[TedsModeling]

Chris - You're spot-on with the scale equivalent sizes.
Most people look at the OD of a scale braided line and equate it with the size of the line they need. They don't realize that the 1:1 braided line size has to include the metal jacket (nominal ID) over the rubber line (nominal ID). So a 3/8" braided line at 1/16 scale isn't .023, but .035 (as you show it). This means instead of using Pro Tech's .025 braided line, you would use their .035 line and fittings.  I also show similar sizing tables at my web site.
 
You hit the nail on the head with the hex nuts & bolts, too.  Again, most people think if they measure across the flats of a scale head or nut they get the size they need. The 1:1 size bolt (5/16" for instance) isn't going to equal that across the flats, because 5/16" represents the shaft size, not the head size. The head and nut sizes are larger.
 
Great job!

Edited by TedsModeling, 20 February 2013 - 06:34 AM.

[Danno]

Wow.  Great idea, outstanding execution, Chris!  

 

 

Thank you.

 

 

[Burnout]

Not trying to hijack Mooneyzs thread or anything and many of you may already know of this, but on the Altered States website, can be found another useful reference chart. It shows which types of components, paint, etc. were used, by year, on 60's era dragsters.
http://www.alteredst...erence_page.htm

[GoatGuy]

Great info Chris. Thanks for all the work you did.

[sportandmiah]

This is awesome. Thanks!