Jump to content
Model Cars Magazine Forum

my74cadillac

Members
 View Profile  See their activity

  • Posts

    23

  • Joined

  • Last visited

 Content Type 

Everything posted by my74cadillac

  1. my74cadillac
    Mocked up the engine and made a set of turbos for it
  2. my74cadillac
    I haven't done to much on the car the last few days but I was able to get the roll cage almost done
  3. my74cadillac
    I was going back and forth with the style of the rims I found a set for a Acura kit but then I wanted deeper so I took the rim and cut the face of it off with the hobby saw and glued the face to the back of the rim it also give the illusion of a wider wheel
  4. my74cadillac
    Sorry that the picture size is getting small I have to copy and past the pictures from photobucket and then past them in the reply
  5. my74cadillac
    Was Abel to get more of the body done today I have the driver side almost done made a rear spoiler that's now done yet made the rear side window scoops and I put on the door and rocker panel extenders on as well as a front chin spoiler
  6. my74cadillac
    First I mock up part of the factory suspension to see how high it is then I take a see thru bendable that I shaved the ends down to the first line and see how much I can take out and Mark it on the parts for most of the rear I cut I cut the springs and then on the front I usually shave the mounting points then for another kit that I lowers a 49 mercury I had to cut the inner wheel well then on others you may have to make your own parts for
  7. my74cadillac
  8. my74cadillac
    Thank you i took a look at some pictures online for a good reference then drew it out on the body and took a hobby saw and cut a few lines on it and just carfully pulled it out on the outside of the wheel well if a piece comes off just glue it back on ware it looks good with the rest of the flair
  9. my74cadillac
    Hi so far I have lowered the car and have the driver side flair done and ready for some filler I plane on making a wide body style body kit for it and a rear spoiler as well the rims are from a honda civic kit that I got from a friend a few years ago I'm also thinking of doing some kind of hood scoop
  10. my74cadillac
    thank you and i wasn't sure on the taillight panel and did not think to look it up until it was already glued
  11. my74cadillac
    finished under body and it is finally finished
  12. my74cadillac
    finished the engine interior is finished scratch built the tack wired the starter when i did a test fit with everything i saw that the cut lines that they want you to use for the rear wheel wells were to big so i cut it off the frame and made my own
  13. my74cadillac
    ya i think i will use the nitrous set up and make fuel regulators and solenoids
  14. my74cadillac
    Thank you
  15. my74cadillac
    some photos of the motor with the fuel line homemade T fitting and fuel filters the rear axle with homemade rotors and caliper with brake lines as well as the body after bare metal foil, just a mock up of the stance.
  16. my74cadillac
    i know you cant see it that well but i ran the throttle cables. still need to do the gas lines. also ran the brake lines into the master cylinder. i also took off the arm rests on the door panels and put a chrome tape on the panels then sanded them a little to look like brushed aluminium. i was going to do a two tone yellow and orange paint but it kept cracking so i painted it intense blue pearl.
  17. my74cadillac
    motor insperation
  18. my74cadillac
    I was looking at the parts bin and found a fuel cell so that will be in the trunk as well as the battery and a nos tank that i am making this is what the trunk will look like before the lines and cables i have also shaved off all emblems and the spot ware the wipers go as well as opening the trunk. on the hood scoop one of the dividers on the sides weren't long as the middle one so i cut it off i also opened the wheel wells
  19. my74cadillac
    Hi im doing the Revell 68 DODGE DART HEMI. I want to do the car as a drag car. So first i cut the spare tire and gas tank out.
  20. my74cadillac
    it took a few coats of the paint then i used dupli color clear and miguiers car wax
  21. my74cadillac
    this is revells special edition of the 68 dodge charger. it has the bare metal foil on the windows and a wired engine. the color is vht high temprature engine metallic burnt copper.
  22. my74cadillac
    the model is a 1957 chevy nomad. its painted i think Hawaiian blue with a white roof. i painted the interior to match the body a little bit. i also did the bare metal foil around the windows and trim.
  23. my74cadillac
    its a blue 1966 olds 442 w30 that is painted blue with a black roof. i did bare metal foil around the windows and trim. i also did all of the spark plug wires as well i also made a custom exhaust tips. sorry if the pics are blurry its my camera.
×
×
  • Create New...