BigTallDad

Consider using fingernail clippers to trim the outside of the piece

I'll see your post and raise you I'm sorry, but this is too much.

Microscale has a product called MICRO SOL and it is a setting solution.

You also might want to look here, in the event you have other questions http://www.modelcarsmag.com/forums/topic/79627-how-do-i-search-for-answers-already-posted-here/

What with all the folks staying home, the Internet in general seems a bit sluggish.

I know you're a newbie, but you're asking questions that have already been answered numerous times. You might want to do some research before you ask your next question. Here's a start http://www.modelcarsmag.com/forums/topic/79627-how-do-i-search-for-answers-already-posted-here/

What scale is the diorama? You might run into the situation where the text would be so small that font wouldn't be noticeable.

Great tip. A similar approach might be used to simulate carbon fiber.

Absolutely stunning! Does that car have a radio (which, along with a heater, was optional back then)? I didn't see an antenna.

I use a black sharpie

It would seem you have everything to do some testing...let us know the results.

A google search will answer that question.

Get a non-metallic color, then add silver Pearl X (available at Michael's) to it. Do some experimentation, using varying amounts of Pearl X, before you apply the finish coat.

Nice resto work. I've never seen a convertible (or any other two-door/two-seat) with fixed seat-backs on the front seat.