Jump to content
Model Cars Magazine Forum

ash74

Members
  • Posts

    82
  • Joined

  • Last visited

Everything posted by ash74

  1. Hello Not sure if this help, there's a bloke called Bill B, who has one for sale on Scalemates. Hopefully he might try to contact you here. But by all means if you are on Scalemates, then look him up. as well. Thanks Ash
  2. Thank you all, The Tamiya bikes are really good to build, I have had a go at the Bimota Tesi, which fought me a little with older decals & a couple of operator errors. I also did a Ducati 916, which came together nicely. The paint I used was Tamiya Lacquer paint Mica blue (LP-41) Thanks all Ash
  3. Hello this is my first go at posting a completed bike, It's Garry McCoy's Red Bull Yamaha YZR-500. The decals are a mix of kit decals & aftermarket. Thanks Ashleigh
  4. Thank you all. So the answer is no. I am wanting to copy windscreens. I have tried parts wanted. I might try to bump it, as I did it over Christmas/new year period. Hmm, Reasonable ability? I have always found something that should be easy is usually not. However I have a go will not loose me anything, so its probably worth having a crack. Thank you all Ash
  5. Hello Does anyone know if you can 3D print/copy clear parts. I cant find anyone with spares of what I need. Thanks Ashleigh
  6. Hello all I am going to refresh this, as I may have accidentally breach rules, moving it another bit on forums. I am specifically after parts 218,219,220 & 221. Obviously, any part of this would be appreciated, or any leads. I am happy if someone has a wrecking kit that would be happy to salvage clear pieces from. Even a bit of information, as too whether clear parts can be copied & 3D printed. Thank you Ashleigh
  7. Hello all I am wondering if anyone has the entire clear sprue for Revell 1:25 Plymouth Christine Pro-mod car? They would be willing to send to Australia? Thank you Ash
  8. ash74

    INSTRUCTION SHEETS

    Also available on Scale mates as well, thanks Ashleigh
  9. Hello All Thank you all for the responses, they are much appreciated. I am not sure I am ready to make a 100% accurate one yet...Maybe in the future, So at the moment the engine remains the same. However it is something that is good to know for a future build where I would like it to be accurate. Thanks Ashleigh
  10. Hello Would anyone know what color would the engine would be on the 1958/59 Plymouth Fury: Christine? Thanks Ashleigh
  11. Thank you both, The color I have seemed to rich, but I think I will stick with it. As you have noted it's difficult to find photo's that dont end up being the box art. Even the You tube videos dont really have good images to decipher colors. I do understand that photography from that time might be a little low definition. However, it seems that they do indeed have window nets, just not the "NASCAR" style I was thinking. Thank you all for the help. Ash
  12. Hello All I am after some guidance for the color on the Folgers IMSA mustang? Does it have a metallic sheen? Also does anyone know if they have window nets? If they do, what type? Thanks Ash
  13. Hello All These are a few of my builds. After my last post, I realize how much the camera shows imperfections. I had trouble getting the lines right on the IMSA 7/11 Mustang. The ASA Camaro went OK. I have the Superflo Camaro & the Folgers IMSA Mustang on the workbench at the moment. Hopefully, they will turn out OK, thanks Ash
  14. Hello all I dont usually post finished models, due to confidence. I am probably most happy with the Top Fuel. I am happy with Super Clean Olds, but the light is not doing it any favors. The Funny Car, I am not overly impressed with the decal quality, but it's OK, Thanks Ashleigh
  15. Hello I think I have some of those. I am not sure what condition they are, as they might be installed on the wheel already. I will have a look later. Thanks Ash
  16. Hello all Not sure if this is the correct spot? Would anyone have a scanned copy decal/paint placement section of the John Force Olds funny car. I have an aftermarket set, most of the decals are obvious, but some are not. Thanks Ashleigh Edit, Doesn't need to be original, a scanned/photocopied version is fine, Thanks
  17. Hello All Kit has gone & on it's way to it's recipient. I must say it was harder than I thought. A lot of deserving recipients with what is going. Thanks everyone Ash
  18. Hello All First off, I will use this to publically thank Thomas Coffey. Who sent me a kit totally free at a cost to him. On that note,as part of the deal...I am putting up a new AMT 1966 Chevy Nova free to a good home. No postage, no nothing. I will put one little thing I would like to happen...If possible. I would like it to go someone who could really use it, who is perhaps struggling because of the Covid situation or for other reasons. If you are intrested, please message me. First one in, first dressed. Thank you Ashleigh
  19. Hello Robyn I know I might be being obvious, but have you tried Slixx themselves? They seem to be still in business. You might find what you are looking for, or you can contact them & ask? Thanks Ash
  20. ash74

    Top fuel Exhaust

    No problems, thank you for looking. I have found my spare kit, which makes it a little less urgent. I would still love to know where the piece went!!! I have dropped smaller pieces & found them fairly easily. This is large piece. I am sure I will come across it one day. In the meantime I will see if someone has one on offer. Thank you Ash
  21. ash74

    Top fuel Exhaust

    Thanks for the run down Force. It helps when asking. I am hoping someone has one spare as I dont want to destroy an entire kit for one part. Thanks Ash
  22. ash74

    Top fuel Exhaust

    Top fuel rail, thanks Ash
  23. ash74

    Top fuel Exhaust

    Hello All I am hoping someone might be able to help. I dropped my top fuel engine on the floor & both headers broke off. I located one, they other has disappeared for the moment. Too find it seems to require me pulling the entire shed apart. I am not sure what direction it went in. So I am wondering if anyone has a left exhaust header for an early 90's top fuel dragster (Joe Amato/Gary Ormsby Or similar) they wish to part with? It is chrome part number 52. Thank you Ashleigh
×
×
  • Create New...