ash74
-
Posts
83 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Gallery
Posts posted by ash74
-
-
Hello
Not sure if this help, there's a bloke called Bill B, who has one for sale on Scalemates. Hopefully he might try to contact you here. But by all means if you are on Scalemates, then look him up. as well. Thanks
Ash
-
Thank you all, The Tamiya bikes are really good to build, I have had a go at the Bimota Tesi, which fought me a little with older decals & a couple of operator errors. I also did a Ducati 916, which came together nicely. The paint I used was Tamiya Lacquer paint Mica blue (LP-41) Thanks all
Ash
-
Hello this is my first go at posting a completed bike, It's Garry McCoy's Red Bull Yamaha YZR-500. The decals are a mix of kit decals & aftermarket. Thanks
Ashleigh
-
bump.
-
Thank you all. So the answer is no. I am wanting to copy windscreens. I have tried parts wanted. I might try to bump it, as I did it over Christmas/new year period.
Hmm, Reasonable ability? I have always found something that should be easy is usually not. However I have a go will not loose me anything, so its probably worth having a crack.
Thank you all
Ash
-
Hello
Does anyone know if you can 3D print/copy clear parts. I cant find anyone with spares of what I need. Thanks
Ashleigh
-
Hello all
I am going to refresh this, as I may have accidentally breach rules, moving it another bit on forums. I am specifically after parts 218,219,220 & 221. Obviously, any part of this would be appreciated, or any leads. I am happy if someone has a wrecking kit that would be happy to salvage clear pieces from. Even a bit of information, as too whether clear parts can be copied & 3D printed. Thank you
Ashleigh
-
Hello all
I am wondering if anyone has the entire clear sprue for Revell 1:25 Plymouth Christine Pro-mod car? They would be willing to send to Australia? Thank you
Ash
-
Also available on Scale mates as well, thanks
Ashleigh
-
Hello All
Thank you all for the responses, they are much appreciated. I am not sure I am ready to make a 100% accurate one yet...Maybe in the future, So at the moment the engine remains the same. However it is something that is good to know for a future build where I would like it to be accurate. Thanks
Ashleigh
-
Hello
Would anyone know what color would the engine would be on the 1958/59 Plymouth Fury: Christine? Thanks
Ashleigh
-
Thank you both, The color I have seemed to rich, but I think I will stick with it. As you have noted it's difficult to find photo's that dont end up being the box art. Even the You tube videos dont really have good images to decipher colors. I do understand that photography from that time might be a little low definition. However, it seems that they do indeed have window nets, just not the "NASCAR" style I was thinking. Thank you all for the help.
Ash
-
Hello All
I am after some guidance for the color on the Folgers IMSA mustang? Does it have a metallic sheen? Also does anyone know if they have window nets? If they do, what type? Thanks
Ash
-
Hello All
These are a few of my builds. After my last post, I realize how much the camera shows imperfections. I had trouble getting the lines right on the IMSA 7/11 Mustang. The ASA Camaro went OK. I have the Superflo Camaro & the Folgers IMSA Mustang on the workbench at the moment. Hopefully, they will turn out OK, thanks
Ash
-
Hello all
I dont usually post finished models, due to confidence. I am probably most happy with the Top Fuel. I am happy with Super Clean Olds, but the light is not doing it any favors. The Funny Car, I am not overly impressed with the decal quality, but it's OK, Thanks
Ashleigh
-
Hello
I think I have some of those. I am not sure what condition they are, as they might be installed on the wheel already. I will have a look later. Thanks
Ash
-
Hello all
Not sure if this is the correct spot? Would anyone have a scanned copy decal/paint placement section of the John Force Olds funny car. I have an aftermarket set, most of the decals are obvious, but some are not. Thanks
Ashleigh
Edit, Doesn't need to be original, a scanned/photocopied version is fine, Thanks
-
Hello All
Kit has gone & on it's way to it's recipient. I must say it was harder than I thought. A lot of deserving recipients with what is going. Thanks everyone
Ash
-
Hello All
First off, I will use this to publically thank Thomas Coffey. Who sent me a kit totally free at a cost to him.
On that note,as part of the deal...I am putting up a new AMT 1966 Chevy Nova free to a good home. No postage, no nothing. I will put one little thing I would like to happen...If possible. I would like it to go someone who could really use it, who is perhaps struggling because of the Covid situation or for other reasons. If you are intrested, please message me. First one in, first dressed. Thank you
Ashleigh
-
Hello Robyn
I know I might be being obvious, but have you tried Slixx themselves? They seem to be still in business. You might find what you are looking for, or you can contact them & ask? Thanks
Ash
-
No problems, thank you for looking. I have found my spare kit, which makes it a little less urgent. I would still love to know where the piece went!!! I have dropped smaller pieces & found them fairly easily. This is large piece. I am sure I will come across it one day. In the meantime I will see if someone has one on offer. Thank you
Ash
-
Thanks for the run down Force. It helps when asking. I am hoping someone has one spare as I dont want to destroy an entire kit for one part. Thanks
Ash
-
Thank you
-
Top fuel rail, thanks
Ash
Motorcycle Chain
in Wanted!
Posted
Hello
Not sure if you are have found a solution, but is it worth trying the Revell 1:9 Scale MV Agusta. That seems to have a solid chain. You might be able to adjust to fit. Thanks
Ash