Dieselhead
-
Posts
147 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by Dieselhead
-
-
Fantastic work here. I've noticed you always have very clean tubing work in your models. Do you have any particular tools or techniques to get those results?
-
Very interesting subject, great work! I've only seen a handful of pictures of these units, even looking up the IH model 8066 tractor doesn't get many results. Will be following this one closely. Any plans for a load at this time?
-
1
-
-
I'd agree with Tom, there's no real standard, it's pretty much whatever fits. I would get some sheet balsa (Hobby Lobby, Michaels, etc), put it on, and just play with the widths, and then score the board with a knife to create the illusion of boards. Do it deep like panel lines, wash it dark and I think it would look great.
-
I would agree with you on the fender and then a short flap on the back. Great work on building the dump body!
-
Thanks guys. I figured I would have to use some form of chipping coat (I bought a vallejo rust and chipping set for the project, hopefully it works) in conjunction with the salt method, and probably some creative masking work. Just wanted to see if anyone else had found a good way to do it that I wasn't aware of. I'll be sure to show off my results once I get working on it.
-
For a project I will be starting soon, my vision of it shows it having some panels where paint has chipped off, exposing bondo/primer. A quick look at most other weathering techniques goes straight to full-on rust and rot, which is not what I'm looking for. Would a normal chipping method work for the desired effect? Has anyone else gone for this look? If I figure it out I'll be sure to post my method so others can follow. Thanks.
-
Maybe a big ol blower and butterfly catcher in the back there? I like the 4 exhausts out the back idea.
-
That's one hell of a project! Great fabrication on the pole body. I'll be watching this one.
-
On 12/11/2018 at 7:09 AM, gotnitro? said:
Since I lean towards heavy construction trucks there was one my bucket list and just recently filled by Jamie R owner of moluminum..the mighty Oshkosh F or P series cab. This cab makes a fantastic plow or mixer ...and is now available..heres it is
I'll be sure to look out for this one, I've been wanting to build one of these for quite a while.
-
Coming together great! Can't help but think the Tamiya M1A1 Abrams kit would go great with this!
-
I know there's quite a few classic wrecker groups on facebook, and a few Holmes-specific ones at that. Unless you want to fork over the dough for a manual, maybe asking one of those groups could help you, at least with the 1:1 reference side of things.
-
-
Hoo boy, this is gonna be a big one. This might interest you, a good bit of detail on the M911s.
http://www.vannattabros.com/truck.html -
359's have different cabs, called "little window" or Unilite cabs, which are far removed from the newer styles. Another good one is the fact that due to center point steering, 359's generally have smaller track width up front than both 79's and 89's. And of course, if we're talking 1/1s, powertrain options are just about always a dead giveaway.
-
On 4/14/2018 at 8:33 AM, Chariots of Fire said:
Hey! those are nice! Quite an improvement on the kit parts. You say you did them for a D9. Is there much difference between the D8 and D9 that would be noticeable?
D9 track of a similar vintage (H and G models) would be wider, for the "normal" width about 2" wider on the 1:1, whereas D8H track would be about 22". However, the true width difference depends on which spec of track is modeled by each respective source. D9 track would also have more links per side.
-
I'd say 5 holes or daytons would be pretty accurate for an 80's work truck. You could also do the alcoa fronts and 5 hole/dayton rears, I've seen that on some trucks too if you'd like the extra chrome up front. Looks like a great beginning regardless!
-
I can't give you any certainty, but just about every W900L conversion hood I've seen has been intended for either an RoG donor kit or the AMT W925.
-
I think we may be supplying our own decals for this one if you wish to get the Cat branding back on. Caterpillar is very quick to send out cease and desist letters and if I was a decal manufacturer, I wouldn't touch that with a 12 foot pole. Regardless, I'll have to pick this up. Looks like an interesting build, would be very fun to grime up as it should be.
-
What engine/transmission did you end up going with? You'll certainly need some serious power to turn those tires!
-
Man this is cool. I'm loving all the fabrication and problem-solving involved, this is a really unique project! I wish you luck with it.
-
Man that looks great. What technique do you use for your nice bends in the tubing? Mine never come out that uniform.
-
A 1978 truck would've been closer to the 6.2, even though the 6.2 didn't become available until 1982. That said, nothing is stopping you from saying the truck was engine swapped down the road. They're V8s so you could set the exhaust up however you want, but from factory they were a passenger side exit located behind the rear axle, as is standard on most pickups.
-
Looks like you've got a real monster on your hands. Do you have sources for the rest of your running/dump gear or is that all going to get scratched?
-
Very impressive, Sergei. That looks great.
Link-Belt HC-218 Truck Crane
in WIP: Model Trucks: Big Rigs and Heavy Equipment
Posted · Edited by Dieselhead
Wow! The carrier looks great! Do you intend to build the upper to be poseable or are you going to set the crane up as a static model?