Jump to content
Model Cars Magazine Forum

Force

Members
  • Posts

    3,704
  • Joined

  • Last visited

Posts posted by Force

  1. I talked to Steve Kohler, of Star Models and he said that he is not getting any more R&R resin and he has about 1100 pieces in his stock. He does update his list, as the last individual item is sold. So you had better buy it if you want something. No word on anyone continuing casting any of their products.

    I emailed Steve on a couple of R & R models the other day, it was a '50 Mercury Convertible wich he only had one left...and now he has none, and the '62 Cadillac 2dr HT Coupe DeVille but it was unfortunately sold out...I really wanted that one as I think '62 Cadillac 2dr HT's are cool... so if anyone know where to get one I'm interested.

  2. Ugh...Good Grief !

    This one is polished stainless steel.

    Ford_StainlessSteel1936.jpg

    e2228f6180cdaed745716b99d3305def.jpg

    I have seen this one in person at the Goodguys Southwest Nationals in Scottsdale AZ in November 2011, it's one of the total six 36 Ford 2 Door Sedans special ordered by Allegheny Ludlum Steel with all stainless steel outer panels, the car is owned by Lon Kueger and Leo Gephardt if it's not sold since then.

    The original order was for ten cars but the press tools wore out after just six and these six 36 2-Door Sedans are the last made of that body style that year.

    Here is a picture I took of the car at the Goodguys meet at Westworld.

    IMG_4501b.jpg

  3. I have worked with radiators for a year and a half in a radiator shop making and repairing car and truck radiators.
    It's easier to do a pass through hole in the core square and loose very little cooling capacity if any, if you do a round hole it's more difficult to reconnect the tubes above and around the hole to the rest of the core, because you don't want to loose any more circulation than necessary.

  4. I think I'll hold on to my 1984 original instead of buying the new one, I still have one in my stash.

    This is a perfect example of why one shouldn't modify existing tooling to do a newer kit, the modifications are irreversible and you can't do the original kit again in it's original state.

    It must be a lot better to tool up the kits so you can do revised parts in separate tool inserts, in that case you still have the original parts intact and can re-issue all versions whenever you like...I thought Revell had learned that by now.

  5. Casey - Yes I saw that episode when the American Trucker series was televised over here,,,but I don't remember what the reefer unit was called.
    But looking for old service manuals is a good tip to find out what they are called.

    KJ790 - the AMT unit could be a Crown 500...but it's on a Fruehauf Reefer trailer, not a Great Dane. ;)

  6. It has to do with the molds for the cab/car body and how they are done.

    Some are "slush cast" where the caster slushes the resin around in the mold until it hardens and the thickness varys quite a lot over the body/cab...but hopefully no reputable caster uses that technique anymore as the castings demands lots and lots of work to be usable.

    Nowadays most of the body/cab molds are done in two pieces, one outside and one inside and the resin is poured in the small space between them, and the thickness depends on how big the gap between the outer and inner mold is.

    I have only one kit from AITM and that's nice and crisp, so I don't have anything to complain about.

  7. they both thermo king units first one an older model unit

    Thanks, I kind of suspected that but I didn't know for sure.

    I have tried to find out what the different Thermo King models are called but I can't find much information on the "interweb" on the older units, I know one type is called Super Boss...but I don't know wich...it can be the model I'm looking for.

    And if you do a google search on Thermo King Super Boss you get a lot of pictures of Tyrone Malone's Super Boss truck as his main sponsor was Thermo King before Bandag...it's a cool truck but not exactly what I'm looking for. :rolleyes:

  8. It looks nice Anthony.

    The only things that bugs me about this kit (and the Peterbilt 359 kit) are the shallowness of the rear wheels, the missing sun visors and the mounting of the rear mudflaps are too far back on the frame...otherwise it's a decent kit.

    cavespeedway - This kit is a Revell ex Monogram snap kit and this together with the Peterbilt 359 they also have are 1:25th scale.

  9. No that's another type of unit (I don't know what make and type it is) wich looks like this.

    T50703-vi.jpg

    And this is the one I'm after.

    GreatDane5b.jpg

    As you see they are different units, thanks anyway.

    This type of Thermo King unit has also been done by Heller for their 3-axle Reefer trailer.

    77607-vi.jpg

    The pictures are borrowed from this excellent website http://public.fotki.com/modeltrucks25thscale/ and all credits goes to him.

  10. Sean- I have plans to build these trucks myself so I have recently done the research on them...so you're welcome to it. B)

    I have some vague memories from the Movin' On series from when it was on TV over here in Sweden maybe a year or so after it was televised in USA, but that's a long time ago and I was very young then, maybe 11-12 or something like that.

    I built the AMT version later sometime in the late 70's, it has survived and I still have it in my collection

    The BJ And The Bear series hasn't been on TV here but I like the appearance of the truck so I'll build it anyway. ;)

  11. There are different versions and modified re-issues made of many kits by the different owners of the companys over the years and some of the tooling might not be in the model they were designed for originally as some kits share some tooling, and some has been altered beyond use, so it can be a hard task to find, sort everything out and see what's workable, so yes a complete tooling inventory must be essential to know what you have and where it is...and as Case says, they probably don't want to reviel that information publicly.

    Round 2 doesn't only have the AMT and MPC tooling, they also have the old Ertl, the Lindberg and the Polar Lights tooling so it's a large chunk of tool steel to go over.
    So I see more nice seldom seen and improved interesting re-issues in the future, and I for one welcome that....but sure, it would also be nice to see a totally new tooling kit now and then.

  12. The last new AMT tools were the 57 Chrysler 300C's, the 58 Plymouth Belvedere, the 58 Edsel Pacer, the 60 Ford Starliner Coupe's, the 62 Pontiac SD 421, the 62 Ford Thunderbird, the 66 Ford Fairlanes, the 67 Ford Mustang and Shelby, the 68-69 Plymouth Roadrunner-GTX and 70 Dodge Coronet, the 70½ Chevy Camaros, the 71 Plymouth Duster, all these kits were developed in the mid to late 90's before the RC2 era in the early 2000's and I have most certainly forgotten a few, but these are the ones I came to think of right now.
    After RC2 took over there weren't that many new kits made, a few new Camaros and Challengers and maybe one or two more, the rest were straight or slightly modified re-issues of kits that were plentiful on the market allready with totaly boring boxart.

    I don't know the financial status of Round 2 LLC but we must not kid ourselves, they are in this business to make money...that's the main thing, and if they don't they'll stop making kits...that's the bare fact.

  13. You will never get the drive shaft to line up exactly in the middle of the frame with this rear axle setup with the reduction gearing over to the left side and not in the middle...and that is as it should be.
    So the drive shaft will go over slightly off center to the left side however you do...but the wheel base on this kit is so short so it looks to be more that usual.
    And if you check on a rear wheel drive car the drive shaft is slightly off to one side there too as the pinion is over to one side of the ring gear. and not exactly in the middle...so that's not uncommon.
    But other trucks has a rear axle setup where the reduction gearing is exactly in the middle so the drive shaft will line up in the center of the chassis.

  14. The AMT W-925 tooling was altered to a T-600A in the 90's so it cannot be reissued in it's original state without some re-tooling...and it's not correct for the TV-series truck anyway but for the pilot called "In Tandem" it's fairly right.

    But Revell of Germany has a W-900 that's a better starting point for a Movin' On project as it's a VIT with the 60 inch sleeper as the TV-series truck was, you just need the correct decals from JBot or Modeltruckin' and a short hood from either a Revell snap W-900 Aerodyne or an old AMT W-925, it will fit on the RoG truck.

    Further you need a Cummins VT-903 and a torsion bar suspension (both available in resin) if you want to do a true replica of the TV-series truck...but if you're okay with likeness the kits Cat 3408 and 8-bag air ride suspension will do.

    The BJ And The Bear truck is for sure expensive on ebay, but you can do the BJ truck with a cheaper generic AMT K-100 Aerodyne and aftermarket BJ McKay decals from JBot or Modeltruckin' and you're good to go.
    If you want to do a correct replica of the BJ McKay truck you have to change the AMT kits Detroit 8V71T (or it could even be a 8V92T) and Allison automatic transmission and put in a Cummins NTC 400 and a manual tranny, Revell of Germany has a NTC 475 in their Peterbilt and KW K-100 kits that can be changed to a 400 if you leave out one of the twin turbos...but if you're not doing a exact replica of the BJ truck the kit parts will do.

  15. Yes, right before RC2 bought the AMT/Ertl company they did several very nice kits, some of them are the best they ever did, after that....nothing...and the people who designed and developed these nice kits was laid off or left by themselves. :mellow:

    About the mentioned Torino Talladega:
    Polar Lights did a Richard Petty version the first time around so only the boxart are new...the decals might not be exactly the same but they're similar.

    But sure, I would also have wished that they did address the problem with the up-swept fenders...but there are lot of problems with this kit (and the Mercury Cyclone Spoiler II) that can be addressed as it feels like it wasn't really fully developed into a finished product and somewhat rushed into production when it was first released.

  16. There is nothing new here, all manufacturers have been re-issuing older kits periodiclally since the very beginning and some kits have been issued over and over and over again, but they have also done new kits at the same time.
    The previous owner of AMT Racing Champions also known as RC2 Corporation wasn't into the model kit business that much, I think they just were after the licensing for their die-cast line when they bought the AMT/Ertl company...they laid off some of the people who knew anything about kit making and just did re-issues of old kits with little or no interest at all in what they did...they also did some new parts and some modifications to older tooling and many weren't that good. <_<

    Round2 who now owns the AMT/MPC/Polar Lights/Lindberg brands on the other hand is model people and they have lifted the brands a lot since the RC2 days, they are going through the tooling bank and have re-issued some kits that hasn't been out in many many years and also more recent good sellers with new boxart and some new or improved parts...and that's fine with me.

    They probably want to build up some capital before starting to do new kits wich is very costly and I think we will see some new kits sometime in the future from them...it's just a matter of time.

×
×
  • Create New...