Vented Wheels! I am using the Wheels from the Indy Corvette for inner Wheels on the Dodger. After removing the chrome, I sprayed them Silver and added a Black Wash. Then I drilled a hole in the center of each Wheel.
Tire Nuts! I am going to Bolt the Dodger down on a Base. I started by cutting out two pieces of thick plastic and drilled two Holes in each.
Then I glued the Bolts in the Holes. These pieces will fit inside the tires so I can attach them to the Base. This should flatten the bottoms of the Tires when Bolted down, to like there is some of weight on them.
I put a drop of paint on each Bolt and marked the Hole Positions. Next I opened up the Holes with an X-Acto Knife. Then I pushed the Bolts through the Holes and attached the Bolts temporarily.
Police Jet Ball #25 is Finished! The body halves have been glued together. Star Wars Droid Robot Arms and a Police Light were added. The Machine Guns are made from Aluminum Tubing. I drilled a hole in the bottom for the Steel Wire Mount.
Here is the Police Ball mounted on the steel wire Base.