Jump to content
Model Cars Magazine Forum

jacobus

Members
  • Posts

    1,099
  • Joined

  • Last visited

Everything posted by jacobus

  1. wel guy,s i have a little stop , rebuilding a part of the room and than put a kind of rack to place as first about 100 models on it if its not more, these are 1:50 and 1:43 so than have i more room in the hobbyroom becouse the are al stil in boxes , the stash of these models was to big , and was no place to do normal walk ore moving i hope in a few day,s i am ready with this and than so further with the Krupp jacobus
  2. look how it is with a chassis from the sparebox , before i start with a new donor kit now i can see were i must cut and more things to change also together with a KRUPP hauler so here from its go cutting and fits and fits and change some things for its looks good for me jacobus
  3. Jeff , kfs have a Bedford , but you must wait for the new owners when the get start with production ore from modellers resource a atkinson MK1 hope,s this helps a little jacobus
  4. Hello , this wil be the build the donor for the resin cab krupp frontlenker now clean everything only , what color ?
  5. Hello , for the Krupp Frontlenker i make it a straight truck , use a donor kit from revell for the chassis and more
  6. oka , this wil be the cab of the KRUPP must make a chassis and al the other things to make a truck only i am stil don,t know if it wil be a straight truck ore truck -trailer jacobus
  7. wel , i build the mack H63 to be ready and than i wil build for 2022 a european old truck it wil be a KRUPP coe with a cummin,s engine that was build in germany under licence but wil start this month to build if its oke for you jacobus
  8. Hello , i am so sorry but the Mack wil not ready on time he is already in the primer and some things are already good biggest problem is the paintjob , first time it go,s wrong [ to cold i think ] cleaned , new primer and now i wait for some higher temperatur i wil look for those that already finnished and some lookin great i wil finnish him next year but not for the planned date wish you al the best fore 2022 and a lot of healty time,s and fun to this great hobby yours , jacobus
  9. i am stil workin on the mack first i look at the rims and with a dril and knife i have very carefull remove the flash [ you can see on the picture ] so if you paint the rim you can see the back of the wheel like it is i have been [ for a while ] on the hunt and search for resin cab,s fro old european truck,s that was here in the netherland,s and germany and so the where very hard to find because the where make in very smal numbers like KRUPP with a cummins engine [ build in germany under licence ] and BUSSING with the unterflur engiene i must say i ended up in germany by a men how make the engine,s , and by my suprice i found also there some resincab,s like this MERCEDES LP , BUSSING and KRUPP so know you know why it bin so long before i workin on the MACK , now i am home to work on this old girl with fun
  10. finaly i go on whit this mack , mesurement the right wheelbase and make a dryfit now i must take a choice of a curbside engine ore a endt 673 , stil lookin for the right info for a good number of the engine , i think the endt 673 is right jacobus
  11. this one is from a beercompany there where several companie,s that use it for commercials and one more hope its helps , i have 2 of these in the stash but not build yrt jacobus
  12. Brian i am stil thinkin to do a curbside ore tilt have several engine,s in the stash , also a couple of mack engine,s so i am also lookin for good pictures how its looks when the cab is tilt thank guy,s for the comments , i have fun now to make this on , THE TRILL IS BACK !!! jacobus
  13. great , i have build this one some years ago , i have used a metal front steering axle becouse the cab is heavy follow this one jacobus
  14. couple of years ago i buy 2 of these fronts for a old style trailer this one i wil use for a movingvan [ short ] now digin up the boxes with trailers jacobus
  15. mesurement for total length and where the points for the wheelbase are and cut it have take the longest overal length and wheelbase and just for the looks now look for a curbside ore a total engine and make the good adjustments for the wheelbase jacobus
  16. so , here we go , choice of wheels , the mack six spoke,s are here somewhere cleaning and sand some lines and the wheels after this go on with the chassis and axle,s jacobus
  17. This one i wil do take the picture from AITM for example now i am sorted out al parts i need , it wil be a single axle and cleaning also lookin for the moving van to rebuild like the old style jacobus
  18. welcome to 2021 BRBO i have make this my build...... the MACK H63 , was a hard choice between the F model - the G model and also the W71 model and so the LT model think of a single drive with a old style moving an . but first the truck jacobus
  19. Jeff , i have also a F600 [ stands on the box ] with a straight backwall but i am also in love with the G- type and for that one i look for more info now i have 4 mack,s to think the F 600 - F 700 - G 73/75 - H 63 jacobus
  20. i join it now that everything go a lot better i wil do it only the choice is diffucult , want to do a Mack but wich one l and there is also a B73/75 resinkit from AITM and some more MACK,S also this one jacobus
  21. hello , it wil not how i want to do every time the axle,s broke , drill it out and than broke something else from the chassis , now i have changed to a AMT kenworth frame [ its older but stronger as that #^*^%$$$%# from revell ] i dont know if everything ready so if not , i am sorry but for everybody i wish you al a merry crismas and a healty 2021 jacobus
  22. stupid , forget the picture,s to take have a lot on my mind , organised the hobbyroom and the stash etc etc sorted out and also wait for some parts but the covid delay a lot of things by the post tommorow first take some picture,s and put my self in a corner with a red head of shame jacobus
  23. Dan its a very big project , like this and many more , now moving to a other place and sorted out jacobus
  24. Thank,s Gator have make some changes , extend the chassis for 4 fueltank,s [ 2 both side,s now i think what wheels i put on , normal ore spokes paint already the chassis and the picture,s wil follow [ if the camera wil work he have some faults now ] and also a big clean up in my room . so much to sort out of the part,s [ like fueltank,s - wheel,s and tyre,s - suspensions , - engine,s and a big pile of transkits , i didnt know that i have such big pile of it - if i see more than 50 you think that i am crazy ] and a lot of kit,s from AMT - ITALERI , REVELL ETC ETC about 350 boxes so ppfff now a put the european on one side and usa on the other but thats a terrible job but i love it to see what i have also a bunch of trailers and car,s and the worst must stil come , about more than 1000 diecast model,s from scale 1:43 and 1:50 and 1:87 to sort out jacobus
×
×
  • Create New...