Ron Hamilton Posted March 23, 2015 Share Posted March 23, 2015 I built this one when Revell brought this kit out the first time several years ago. I used a hardtop from the AMT "Prestige" 1963 Corvette Roadster. It fit prettty good, except that the front edge is just a little bit off, but I think it came out fine, as I wanted a hardtop on it. I built this one before I discovered MCW paints. It's painted with a Testors' Model Master Dark Red Metallic Enamel, cleared with their "High Gloss Lacquer Clear, and rubbed out. This one is one of my favorite cars in the one-to-one world. I wanted something other than Bright Red, or Blue, besides, I have a Marina Blue Fastback to go with it. Quote Link to comment Share on other sites More sharing options...
chunkypeanutbutter Posted March 23, 2015 Share Posted March 23, 2015 Slick Vettes. Love the removable hardtop. Quote Link to comment Share on other sites More sharing options...
Ramfins59 Posted March 23, 2015 Share Posted March 23, 2015 Those are nice looking Vettes Ron. Quote Link to comment Share on other sites More sharing options...
hacked Posted March 23, 2015 Share Posted March 23, 2015 ''very nice'' Quote Link to comment Share on other sites More sharing options...
Monty Posted March 23, 2015 Share Posted March 23, 2015 Beautiful work on those two, Ron. Love the color choices, too. You nailed the Marina Blue, and the red looks like Marlboro Maroon, which was also a '67 color. Couple questions for ya: 1) Do you have the Testors part number for Model Master Dark Red Metallic Enamel? 2) What's the secret to making the stinger stripe work with the crossed flags on the nose? Quote Link to comment Share on other sites More sharing options...
Dave Darby Posted March 23, 2015 Share Posted March 23, 2015 Is the blue one a Revell also? Quote Link to comment Share on other sites More sharing options...
slusher Posted March 23, 2015 Share Posted March 23, 2015 Two beautiful models Ron, i love the dark red. Quote Link to comment Share on other sites More sharing options...
charlie8575 Posted March 23, 2015 Share Posted March 23, 2015 Very nice work on both of these. Charlie Larkin Quote Link to comment Share on other sites More sharing options...
Danno Posted March 23, 2015 Share Posted March 23, 2015 Gorgeous! Quote Link to comment Share on other sites More sharing options...
Guest Posted March 23, 2015 Share Posted March 23, 2015 Both are stunners Ron. Quote Link to comment Share on other sites More sharing options...
vintagercr Posted March 23, 2015 Share Posted March 23, 2015 Beautiful! Quote Link to comment Share on other sites More sharing options...
taaron76 Posted March 23, 2015 Share Posted March 23, 2015 Very nice, Ron! Tim Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted March 23, 2015 Author Share Posted March 23, 2015 Beautiful work on those two, Ron. Love the color choices, too. You nailed the Marina Blue, and the red looks like Marlboro Maroon, which was also a '67 color. Couple questions for ya: 1) Do you have the Testors part number for Model Master Dark Red Metallic Enamel? 2) What's the secret to making the stinger stripe work with the crossed flags on the nose? Unfortnately, Testors does not make that particular paint any more. If I remember right, it was in the Car Colors line they did back in the 90's. At the time I built the roadster, I was a little apprehensive about using lacquer on a styrene model, as I have had many a fried body from the lacquer burn. As a matter of fact, my first air brush jobs were done with Tamiya Acrylics thinned with their thinner, custom mixed to my eye. I liked that Testors color better than the actual Marlboro Maroon, as it seems to be more red than silver. On the red Corvette, I "Bare Metaled" and paint detailed the flags, and trimmed the trimmed the stinger decals where the flags were moulded in, and installed them. On the blue car, I used the Model Car Garage photoetch set. I removed the flags and scripts from the car, painted and decaled the car, then I added the photetch after I paint detailed them on the sprue. I have learned a lot of tricks over the 50+ years I have been doing this, but unfortunately, my best modeling is behind me. I still enjoy it, but my physical limitations are catching up to me. Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted March 23, 2015 Author Share Posted March 23, 2015 Is the blue one a Revell also? Yes, I built it to represent a L-88 Coupe. The red roadster build was so enjoyable to me that when I did the coupe, I added detail that was not available to me at the time. I opened up the side gills, added various pieces of the MCG Photo-etch for the '66-67 Corvette, the MCW Marina Blue lacquer, A real Wood Steering Wheel from Replicas and Miniatures, Detail Master Aluminum Disc Brakes, a set of American Torque Thrust Wheels and Good Year Blue Streaks from the Revell 32 Ford 3-Window, and a homemade L-88 air cleaner made from sprue. I consider this one one of my best builds. Quote Link to comment Share on other sites More sharing options...
mustang1989 Posted March 23, 2015 Share Posted March 23, 2015 Nailed 'em both!! They look great Ron! Quote Link to comment Share on other sites More sharing options...
catpack68 Posted March 23, 2015 Share Posted March 23, 2015 both look great ron,but I really like the 67 coupe Quote Link to comment Share on other sites More sharing options...
bbowser Posted March 23, 2015 Share Posted March 23, 2015 both look great ron,but I really like the 67 coupe X2! Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted March 24, 2015 Author Share Posted March 24, 2015 both look great ron,but I really like the 67 coupe The '67 Coupe came out great, and I love it, as well as the roadster. Wait until you see the next Corvette on my bench. I am not telling what I am going to build, but trust me, it will be every bit as good in its own right. And it's ready for paint!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.