Jump to content
Model Cars Magazine Forum

Recommended Posts

I don't get on here as often as I'd like, and been asked about engines that I've been developing, but I realize not everyone is on FB either to see pics there ...so here are some pics of my most recent Monsters :)

This is a major revamp of the Revell 1:25 Hemi LX V8, with most obvious addition of Supercharger, but the changes go much deeper, every single component has been modified and enhanced in some way, or else scratch built ...even the plain oil filter was replaced with a more detailed piece

The poorly kit (plain blank) heads were completely redone, with casting details, and proper separate Hemi LX valve covers made from scratch, including bolts and twin spark plugs

Proper coil-on-plug ignition coil packs were made, and cast separately also

The supercharger with bespoke intake manifold is full of detailing, separate throttle body was scratch built, with tight fitting intake tube + cone filter (actually fits under kit hood), fuel rail and injector detail, and Hemi specific "through manifold" oil filler + cap

Even the engine accessory plate is more detailed, with proper radiator hose spouts in place, and more detailing, with of course new serpentine belt + tensioner set-up for the supercharger

Automatic VAG1 transmission still fits, but I adapted the T56 6 speed to fit now (as shown)

I'm pretty proud of how this newest engine set turned out :)

11403213_843156752444702_736130274404907

This is the supercharged (C6) LS V8 engine build

Lots of hidden detailing improvements on this baby also, and of course the most obvious, supercharger ;)

10372540_766806733413038_341429683744571

Another LS project, just finishing up this one, a truly unique (since IRL never existed, that we know of?) and fun ...monster 9.45L V12 engine set :) transmission is a Tremec 6060 6 speed, and fully detailed block, heads, intake and simpler accessory belt system (A/C and P/S delete) with low hung Alternator, block hugger tri-Y headers, and tight fitting intake snorkel with cone filter (due to engines length), to (try) fit some hot rod engine bays?! LOL

11535729_845057795587931_922013926495075

Edited by Jeremy Jon
Link to comment
Share on other sites

That is really cool. I am wondering about the bluish color. I presume it is clay you used to hold it together to photograph it?

I believe I saw him mention on Facebook that it's a dye he uses in the resin to make it easily identifiable as a Clearly Scale product,pretty clever if you ask me.

Link to comment
Share on other sites

Thanks for the kind words, Fred, Andy, Greg, Derrick & Austin :)

Feel free to PM me here, and I can give you my contact info

The very light green tint is actually part of the liquid plastic resin, which I have custom mixed for me by the manufacturer, along with other specific properties I've requested of them, making for much better quality result, in combination with my new pressure casting method.

Austin is right, that is why I requested the colour added, to make it unique visually as my product :) but also a slight colouring allows one better ability to prep the surfaces, and also spot any flaws in the production process.

Edited by Jeremy Jon
Link to comment
Share on other sites

Here's another engine set WIP, not really a monster, but not otherwise available in the scale market, a highly detailed VW 16V engine & transaxle set.

Unlike my other engine sets of 1:25 scale, this one in proper 1:24 scale, fitting specifically for the Revell Mk1 Golf chassis, which is also the base of my pending Mk1 Scirocco kit ;)

11207362_825505437543167_716374126646752

11209747_825505154209862_591363068461685

Edited by Jeremy Jon
Link to comment
Share on other sites

That VW 16V is pretty interesting, I may have to find something to put that in when you release it. Any plans for a rotary? I've got a mint Monogram rx-7 I'd be willing to crack open and send you the engine from if you'd cast it. I've got more than a few builds I'd love to throw a rotary in but just not enough engines.

Link to comment
Share on other sites

Hey J/C, thank you! :)

Thanks Nick Sorry, no I don't , they aren't really my genre.

Thanks Austin I'm not really into Japanese cars/engines, as you can probably tell, so I don't have any Rotary stuff sorry.

Thanks JB Actually it'll be a full kit, but unlike the old AMT Mk1 Scirocco (early style), this will be a proper 1:24 scale (I'm modifying it all up from 1:25) and the later Mk1 Scirocco body style. Also it's using some Revell Mk1 Golf chassis as basis (starting point/donor) ...so the 16V engine I'm developing, will fit directly into both the 1:24 Revell Mk1 kit, and my coming Mk1 Scirocco kit :)

Link to comment
Share on other sites

I believe I saw him mention on Facebook that it's a dye he uses in the resin to make it easily identifiable as a Clearly Scale product,pretty clever if you ask me.

http://smcbofphx.proboards.com/thread/1987/marshall-guitar-amplifier-badge

OH....OK I thought it might be like the glow in the dark dye I used to make this really cool Marshall guitar amplifier badge. I thought it would sell well on Fleebay but nobody bit. I gave this one away but I could make another one.

Greg

Link to comment
Share on other sites

  • 5 weeks later...

Couple more interesting Monsters under development, in fact I nicknamed one "Monstercharged"  (because it's fun to say)  :D

First is a revamp of my GM LS V8 engine, into a version of the GM performance crate LSX454 engine, carbureted version, features my 3 piece 4bbl street carb, simplified belt drive set-up and custom deep filter in triangular shape I scratch built for this engine  ...now I just need to make up some valve cover decals & proper 4L60E transmission for it  ;)

10407414_868302833263427_867249365857615 11825750_867186320041745_330722791927639

 

Second is the "Monstercharged" Ford DOHC 5.7L (351 cu.in.) V8, just a first casting, visible are the dual supercharger units opposed orientation and central structure, in which the single center shaft runs to rear where an external mini-belt drive (not visible in these pics) connects dual S/C units drive pulleys. 

Many changes to make yet, but can you say +1000 bhp  :D   making this one for fun factor, like the GM LS V12 engine set, is fictitious too, but that's the fun of our hobby,  being able to create something by your own hands, which is exciting & fun IMHO

11694001_866777546749289_516886934862216

 

Speaking of the GM LS V12, it's completed ...and it "just" barely fits a C6 'vette engine bay!

Maybe we'll learn someday in the future, that there was a top secret C6 ZR1 'vette prototype with LS V12 built for consideration ?!?  :huh:  :D

11742970_862498580510519_387777761083911

11252348_862488797178164_415978668743224

 

 

Edited by Jeremy Jon
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...