jbattersby Posted July 26, 2015 Share Posted July 26, 2015 (edited) I bought this kit for 2 Euro at a flea market last summer. Somebody had started to build it, so a couple things were messed up but all the parts were there. I definitely had to get rid of the gold though. A good portion of the model was gold plated so I had to strip everything down to the plastic and start fresh. The white wall tires came from another kit I had, I figured they would be better then the 70's wire wheel/fat rear wheel combo. Whoever started the model actually glued the cylinder heads upside down, so the V8 looks a bit strange, but I couldn't rip them off without destroying the engine block. Since some of my other projects are taking long, I did this as a quick build on the side. The colors I went with are: Exterior Paint Revell Enamel 93 - Interior Paint Revell Enamel SM 378. I hope you guys like it so far, she should be done very soon! Edited July 26, 2015 by jbattersby Quote Link to comment Share on other sites More sharing options...
cobraman Posted July 26, 2015 Share Posted July 26, 2015 Nice start. Keep er' goin' . Quote Link to comment Share on other sites More sharing options...
jbattersby Posted July 26, 2015 Author Share Posted July 26, 2015 Nice start. Keep er' goin' .Thanks! Quote Link to comment Share on other sites More sharing options...
slusher Posted July 27, 2015 Share Posted July 27, 2015 Looking really good... Quote Link to comment Share on other sites More sharing options...
vintagercr Posted July 28, 2015 Share Posted July 28, 2015 Looks good! Quote Link to comment Share on other sites More sharing options...
superbike-shaun Posted July 28, 2015 Share Posted July 28, 2015 Hey J great use of shading & colors !superbike-shaun Quote Link to comment Share on other sites More sharing options...
rsxse240 Posted July 28, 2015 Share Posted July 28, 2015 (edited) I love the way this is going. The valve covers seem to be awkwardly positioned, I think something might be installed improperly. Is it possible the cylinder heads are on backwards? Like the intake side was inadvertently placed where the exhaust should go.Keep up the good work, I can't wait to see how this turns out. The colors look great and your photography is really well done. Edited July 28, 2015 by rsxse240 Quote Link to comment Share on other sites More sharing options...
jbattersby Posted July 28, 2015 Author Share Posted July 28, 2015 I love the way this is going. The valve covers seem to be awkwardly positioned, I think something might be installed improperly. Is it possible the cylinder heads are on backwards? Like the intake side was inadvertently placed where the exhaust should go.Keep up the good work, I can't wait to see how this turns out. The colors look great and your photography is really well done.Yes they are, I wrote at the beginning of the post that whoever started the model actually glued the cylinder heads upside down, so the V8 looks a bit strange, but I couldn't rip them off without destroying the engine block. I paid 2 Euro for the kit, so I left it as is, she'll still look good once everything is together. Quote Link to comment Share on other sites More sharing options...
rsxse240 Posted July 31, 2015 Share Posted July 31, 2015 wow, now I feel really smart. lolwords tell things? when did that start happening? hahahaI'm a picture looker. lol I still think it looks good! Quote Link to comment Share on other sites More sharing options...
horsepower Posted August 1, 2015 Share Posted August 1, 2015 A little work with a razor saw could remove the heads cleanly enough to reuse without any problems. I've had pretty fair luck just scoring a line with a saw or the back of a #11 blade along the glue joints then flowing some liquid cement along the lines and letting them soak for awhile, usually then they can often be removed at the original glue joints. A little bit of information for the next time. Quote Link to comment Share on other sites More sharing options...
jbattersby Posted August 3, 2015 Author Share Posted August 3, 2015 A little work with a razor saw could remove the heads cleanly enough to reuse without any problems. I've had pretty fair luck just scoring a line with a saw or the back of a #11 blade along the glue joints then flowing some liquid cement along the lines and letting them soak for awhile, usually then they can often be removed at the original glue joints. A little bit of information for the next time.Thanks for the tip! Quote Link to comment Share on other sites More sharing options...
jbattersby Posted August 20, 2015 Author Share Posted August 20, 2015 Finally an update on my Copper T. I had to lower the front of end of the chassis in order to give it the right stance. The first pic is before I lowered the front, I was just mocking up the front wheels/suspension to see how it would look. Since I'm using a different wheel/tire combination then the kit came with I had to do a bit of work to get that front end low enough that the car retains it's aggressive stance. In the second pic I had just attached the exhaust, which I wrapped with white tape to mimic header wrapping to cover the hot metal where you might burn your leg while getting in and out of the car. Not sure if that would really help in reality but I figured the exhaust needed a bit of detail. Only pieces left now are the grill and some paint touch ups on the front suspension. Enjoy! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.