Perspective Customs Posted July 26, 2015 Share Posted July 26, 2015 Here's my latest project. Hopefully I'll finish it before the A.D.D. kicks in. Taking the AMT 96 Chevy Tahoe Snap kit & converting it to the 2 door version. I've seen a couple of people here do this in the past Here's what I started with and where I am so far. I removed the step below the doors and cut the b-pillars just behind the front doors back to the c-pillars. I'll move the c-pillars up to the front doors then cut about 6 scale inches vertically from the rear doors and about 5 scale inches vertically between the rear wheel openings and the taillights. The leading edge of the blue tape is where I plan to cut the 11 inches out of the roof & move it forward. Once the body's done I'll focus on the interior tub & chassis. Quote Link to comment Share on other sites More sharing options...
hooknladderno1 Posted July 26, 2015 Share Posted July 26, 2015 Nice start Jay! I had begun a similar project several years ago, but like many - set it aside. Look forward to following your build! David Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted July 26, 2015 Author Share Posted July 26, 2015 (edited) This is the look I'm aiming for... Thanks David. I've been thinking about it for a few years myself. Finally got around to getting it started. Edited July 26, 2015 by Perspective Customs Quote Link to comment Share on other sites More sharing options...
cobraman Posted July 26, 2015 Share Posted July 26, 2015 Cool project. Good luck ! Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted July 27, 2015 Share Posted July 27, 2015 HMMMMM! Interesting project here! not one I would embark on. But this thread has captured my attention. Be Well Gator Quote Link to comment Share on other sites More sharing options...
JJ Deuce Posted July 27, 2015 Share Posted July 27, 2015 Awesome! I've always loved those trucks. Looking forward to seeing how it turns out Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted July 27, 2015 Author Share Posted July 27, 2015 Thanks guys. It's actually going smoother than I thought. Dissected! Now to remove the extra inches from the roof, rear doors & behind the wheel openings. As long as I remember to measure (at least) twice & cut once, I should be OK. Thanks for tuning in. Keeps me inspired. Quote Link to comment Share on other sites More sharing options...
kelson Posted July 28, 2015 Share Posted July 28, 2015 Cool idea!,i'm going to be following this one. Quote Link to comment Share on other sites More sharing options...
slusher Posted July 29, 2015 Share Posted July 29, 2015 Great looking project. You have my attention... Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted August 2, 2015 Share Posted August 2, 2015 Great looking project. You have my attention...x 2 Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted August 2, 2015 Author Share Posted August 2, 2015 Thanks guys! Just a quick update. Soaked in Purple Power and removed the lower body side moldings. Next is to even up the cuts, glue it together, primer, filler and sanding. Quote Link to comment Share on other sites More sharing options...
dieseldawg142 Posted August 2, 2015 Share Posted August 2, 2015 (edited) ....... Edited May 11, 2018 by dieseldawg142 Quote Link to comment Share on other sites More sharing options...
mikemopar70 Posted August 4, 2015 Share Posted August 4, 2015 Interesting, good work!Keep it going... Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted August 5, 2015 Author Share Posted August 5, 2015 Getting there... 1 Quote Link to comment Share on other sites More sharing options...
jeffs396 Posted August 5, 2015 Share Posted August 5, 2015 Looking GOOD so far! Quote Link to comment Share on other sites More sharing options...
dieseldawg142 Posted August 5, 2015 Share Posted August 5, 2015 (edited) ..... Edited May 11, 2018 by dieseldawg142 Quote Link to comment Share on other sites More sharing options...
hjracing Posted August 5, 2015 Share Posted August 5, 2015 Great job! Some time ago I think on do this convertion myself, I really like the 2drs more than the 4drs! Quote Link to comment Share on other sites More sharing options...
Maindrian Pace Posted August 6, 2015 Share Posted August 6, 2015 Very nice, proportions are right on the money. Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted August 7, 2015 Author Share Posted August 7, 2015 (edited) nice chop Jay! you going to have to make your own 3/4 windows? Thanks Dan and yeah, those windows are going to be a challenge with the curve at the roof line. I'm sure I'll go through a lot of clear plastic to get 'em right. Still a few spots to clean up but this is where we are. The wheels and tires are not what I'll be using, just trying to get an idea of the stance. I sent an email to Alan at Ma's Resin a few days ago but haven't heard back yet. I'm open to suggestions on the wheels & tires. Edited August 7, 2015 by Perspective Customs Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted August 7, 2015 Share Posted August 7, 2015 Looking Very Good!! I always liked the two doors! Quote Link to comment Share on other sites More sharing options...
hooknladderno1 Posted August 7, 2015 Share Posted August 7, 2015 Jay,She's looking great! David Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted August 9, 2015 Author Share Posted August 9, 2015 Starting on the interior. Not going to put too much detail into it since I plan on tinting the windows. I just cut a section out of the tub and chopped the rear seat down a bit. Quote Link to comment Share on other sites More sharing options...
hgbben Posted August 9, 2015 Share Posted August 9, 2015 Great work Jay Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted August 10, 2015 Share Posted August 10, 2015 Your project reminds me of a story! Many years ago my family and my wife's brothers family decided to go to Wildwood, NJ together and stay at a beachfront hotel. This was a hotel built in the 1950s, six stories with all the room facing the water, with common balconies and entry doors off that balcony walkway. We are asleep at about 5:30am, and all of a sudden my wife is shaking me because there are sirens blaring everywhere. She thinks the hotel is on fire. I investigate and see it's all police activity on the beach. The streets dead end at the beach with a barricade of closely spaced sawed of telephone poles, and then a severe drop down onto the beach. Right next to our hotel is your Tahoe, a white one that has managed to blow through the barricade and is sitting nose deep into the sand, with it's rear still up on the wall. It's almost daylight and cops are swarming all over the beach with flash lights.I head downstairs and find out that some clown robbed a local convenience store in the stolen Tahoe, and led cops on a chase through the narrow streets of this beach resort town. He made a wrong turn down a dead end and landed on the beach. He ran off. We make some coffee and continue to watch the spectacle from our balcony, as is just about everyone else in our hotel. Eventually two cops come walking from the beach, one carrying a boot and the other carrying a garbage bag full of money. My bro-in-law and I ask a cop if they caught the guy, nope he got away with one shoe and no money. We head back upstairs and our wives ask us if they got the guy, We tell them, "Yup, they caught him a few blocks down the beach." The women are relieved and go about their day. We lied? Yea, we knew this guy was as far away from there as he could get and wouldn't be an issue. But to tell our wives he was still out there would have meant instant packing and heading home! Quote Link to comment Share on other sites More sharing options...
Perspective Customs Posted August 22, 2015 Author Share Posted August 22, 2015 Ha! Funny story Tom. I guess the facts were changed to protect the innocent.Haven't worked on the Tahoe in a while. Not A.D.D. this time, had to finish the H2 and my laptop crashed. Now that the Hummer's done and I was able to remember by login password I'll get back to finishing the Tahoe project and post my progress. Stay tuned. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.