Tom Geiger Posted August 3, 2015 Share Posted August 3, 2015 (edited) I've always said that diecast vehicles are nothing more than a starting point for a model I want to build. So whenever I see a decent diecast truck that isn't available in plastic, I grab it up. It can be displayed as-is for now, but is always available to me as something to be stripped down and done as a truck I want for my shelf! Many of these are currently in storage, so I may have the manufacturers wrong, so feel free to correct me! I believe this is a Jada. I have two of this original issue, that has all the stock parts. I've taken a blue one apart for parts, the entire bed assembly is plastic and will appear on a model. I had sent off the factory correct wheels / tires to Al Raab for casting. 1941 Plymouth Pickup - This one has appeared under a couple of different company names, most recently as a Motormax Walmart special along with a plastic camper shell that looks totally wrong on this truck. This no doubt was copied from the Danbury Mint vehicle. 1941 Dodge panel van - Johnny Lightning Release, I believe our friend Art had a hand in this one. Look twice on the above two photos... they are not the same vehicle. We didn't get the second generation Chrysler minivans in plastic, but we did get them in scale! One is a Dodge Caravan and the other is a Plymouth Voyager. 1950 Ford Step Van.... was produced with many different company colors. The year of this van can be changed by simply changing the grill. I'm planning on one of these becoming a 1953 model. Modern cars really didn't get kitted often, so here's a pair of diecast Pontiac Vibes by Road Signature. I got the blue one at Good Will for $2 And would you believe that two different companies went after the mid 50s Internationals? The van is a FIrst Gear, which also did a window van, while the pickup was done by Liberty Classics. I can just hear the, "No thanks! I'll wait for plastic!" Yea, that'll be some wait. And here's the pair First Gear did for NAPA, an International Metro van! Just a few of the many diecast in my collection that we probably will never see as a plastic kit. So why not buy them, either display them or pry them apart as the basis for your next model project. Note that the entire model car hobby got started by a few guys who were prying open 1950s promotional models, so the hobby has come full circle! Edited August 3, 2015 by Tom Geiger Quote Link to comment Share on other sites More sharing options...
Harry P. Posted August 3, 2015 Share Posted August 3, 2015 Those are all really cool!Too bad some people don't consider diecasts to be "real" models. Their loss... they have no idea what a wide variety of cool subjects are available. Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 3, 2015 Share Posted August 3, 2015 (edited) Those are all really cool!Too bad some people don't consider diecasts to be "real" models. Their loss... they have no idea what a wide variety of cool subjects are available.You are correct Harry. I'm one of the serious diecast fans and actually get more enjoyment altering one than building a kit from start. With about 40000 pcs, I have plenty to play with. At least a few of the resin bodies out there have been cast off of diecast models. Tom, I think the Chevy wrecker is Saico. I have a couple stashed here somewhere for the beds. Like you I also have a few of the panels and step vans. The First Gear trucks are real nice. I saw a 1960 Ranchero today by MoterMax that looked pretty good. It measured about 8in long. Edited February 15, 2016 by AzTom Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted August 4, 2015 Author Share Posted August 4, 2015 (edited) Here's a pair of metal Explorers we never got in plastic... I believe these were Maisto. The Ironsides Ford van.. only NOT in 1/20 scale. These appeared at Walmart for a blink of the eye! And a pair of Jeeps! I bid low on two at the same time and got lucky. I reasoned that I'd resell one... then I got them and loved the colors! And while on the subject of Jeep... a decent starting point for any Jeep model. I believe this one is Ertl. While not light commercial, I liked this one a whole lot. I believe it's Maisto. And for $10 I had to have it. If car companies were doing promotional models today, they'd look like this! Highly detailed diecast, it's the available technology. And since we have driven this train off track from light commercial, I'll share this trio. It's a Pontiac Solstace, Saturn Sky and Opel GT, the version GM sold in Europe. Yup, the only Opel ever made in the USA and shipped off to Europe! Edited August 4, 2015 by Tom Geiger Quote Link to comment Share on other sites More sharing options...
Ramfins59 Posted August 4, 2015 Share Posted August 4, 2015 I've bought about 15 diecast cars so far to fill in "holes" in my 1950's car collection for cars that aren't or weren't made in kit form, and there are quite a few that I still want to get as funds permit. I haven't put my own "personal touch" on all of them yet but will eventually get around to doing that. In some cases I've picked up diecasts of cars that I really didn't have a desire to build a kit of..... yeah, you can call it "cheating"...... so shoot me. Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 4, 2015 Share Posted August 4, 2015 More nice ones Tom. I think the Jeep is Spec-Cast. They did a panel also. Here's you a very nice Chevy van in 1/25 by Diecast Promotions. Dodge Power Wagon 1/25 by Ertl Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 4, 2015 Share Posted August 4, 2015 Tom, I hope it's ok post these here while on the subject. how can you not love a 47 Studebaker by Ertl in 1/25 Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted August 4, 2015 Author Share Posted August 4, 2015 Perfectly fine to post more diecast vehicles in this thread! Post on! Quote Link to comment Share on other sites More sharing options...
RandyEarle Posted August 4, 2015 Share Posted August 4, 2015 I have recently picked up the Jada IH rollback in 1/25. I also have a First Gear NAPA Mack wrecker, and several of the Chevy tow trucks in the first post. The Plymouth pickup is nice. Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 4, 2015 Share Posted August 4, 2015 Welcome back Randy! These were made by Yorkshire in 1/25 Diecast 1917 Ford 1927 Ford Cherry Picker Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted August 4, 2015 Author Share Posted August 4, 2015 Ah the Yorkshire BTL trucks! The Bell Telephone Pioneers Club was a group of retirees who did social services. My wife worked for AT&T and the Pioneers often had tables of items for sale as fund raisers, and they had Yorkshire do the series of trucks for them. So I believe I have the whole set, as my wife would bring me home the new ones as they came out around Christmas time, kinda like Hess Trucks. Hosted on Fotki They called this the delivery truck, first of the series in 1983. Here's the Lineman Model A. This was number 2 in the series, dated 1984. Pole digger Dodge Power Wagon. Number 3 dated 1985 This one is a bit small. Guess they did it box scale. The Model T platform truck Tom Az showed was Number 4 dated 1986. The platform actually telescoped on this one. This and the Power Wagon were the coolest of the series. This is pretty much the same as your covered truck with the side curtains, but issued as Number 5 in 1987, your truck was Number 6 in 1988. And I believe that was the end of the line. The BTL Pioneers also commissioned Ertl to do that Bell Telephone version of the old Model T van with the black and white image on the box. Lore is that the people who did the order for the Pioneers didn't understand it was a kit, and Ertl got stuck with a bunch of them. Which is why those are plentiful to this day. Some or all (I don't know) were also done in red paint for Bell Canada. I've seen them but don't own any. Yorkshire also did... (I'm not sure if these were done as fund raisers or just for public sale) Model A mail truck. Hosted on Fotki Model TT Tank Truck. This one is generic and the box is marked "Ninth Edition" so who knows how many Yorkshire models I've missed. A few words. These are a bit crude both in casting and finish, but are cool in their own right. Don't be spending big money on these, they appear regularly on eBay pretty cheap... they also appear at $50 or more! And a reward for those who stuck with us... bit-0-trivia... our own Dean Milano once worked for Yorkshire! Quote Link to comment Share on other sites More sharing options...
Chuck Most Posted August 5, 2015 Share Posted August 5, 2015 I took the Maisto 2010 F-150 XLT and "downgraded" it to a base-model XL. I used wheels and tires from the Revell Expedition SSV... incorrect for that application, but just the ticket here, and a scratchbuilt center bench. The untouched factory example is on the left in this pic- Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 5, 2015 Share Posted August 5, 2015 Nice job Chuck. Tom, I think I had them all as well plus a white one that had no markings. I sold most of them off, being lucky to get $15.00ea. As crude as they are they were considered pretty good back in the day. How about a big truck. Ertl 1/25 1/25 Dually. I think this one is Brookfield SpecCast 1/25 F-350 Ford SpecCast 34 Ford in 1/25 ScecCast 1/25 57 Chevy stake, came with a lawn tractor Quote Link to comment Share on other sites More sharing options...
Harry P. Posted August 6, 2015 Share Posted August 6, 2015 Once again... people who dismiss diecasts as "unworthy" are missing out on a treasure trove of fine models... most of which they will never see in plastic kit form. Their loss. BTW... Chuck, your "downgraded" F150 will be in a future edition of the mag... Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 7, 2015 Share Posted August 7, 2015 And, you could have a lot of fun with the old Hubley kits in 1/20 scale. Quote Link to comment Share on other sites More sharing options...
hooknladderno1 Posted August 7, 2015 Share Posted August 7, 2015 I have long been a believer in diecast conversion, especially where no subject exists in plastic or resin. Here is a Matchbox Collectables 1946 Dodge Power Wagon My hometown had a 1927 American La France pumper. As there were no kits available, I took a 1/24 Yat Ming diecast and modified it. This is early on in the project. A twin replica is being constructed as a gift to the fire company who celebrates their 125th anniversary this year! I have several more that I will post in separate threads... David Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 25, 2015 Share Posted August 25, 2015 Another First Gear Metro van in 1/25 with opening side and rear doors. This is like the Mack Roadrunner mentioned. First Gear in 1/25 scale with opening hood and doors. Dodge van by First Gear in 1/25 scale. You can click on the photos to go to my fotki page and see more photos of these trucks. Quote Link to comment Share on other sites More sharing options...
Yenkocamaro Posted August 25, 2015 Share Posted August 25, 2015 Tom, loving that tow truck, wish someone would do a modern light duty tow truck in 1/18. Cheers,Lance Quote Link to comment Share on other sites More sharing options...
Longbox55 Posted August 25, 2015 Share Posted August 25, 2015 You certainly will not hear any gripes about die cast from me! I have a pretty extensive collection myself, mostly tractors and ag equipment, but I also have plenty of trucks and Nascar also. A work in progress combining a Jada tow truck bed and an Ertl '57 Chevy 2 ton truck Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 27, 2015 Share Posted August 27, 2015 Tom, loving that tow truck, wish someone would do a modern light duty tow truck in 1/18. Cheers,LanceI would be all over that one. I have most all the HW61 trucks in 1/16 but they are just too big next to the 1/18 cars. Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 27, 2015 Share Posted August 27, 2015 Bill, Those Olivers are my favorite. You know Scale Models made the one you have in 1/25 also. I like the tow truck. Would like to see a WIP here on that one. Here's one I did several years ago. This on is 1/34. The bed is First Gear and the truck is SpecCast. Quote Link to comment Share on other sites More sharing options...
spencer1984 Posted August 27, 2015 Share Posted August 27, 2015 (edited) Some very cool subjects here, count me among those happy to have certain subjects regardless of what the material is. Here are a few that I've modified: Edited August 27, 2015 by spencer1984 Quote Link to comment Share on other sites More sharing options...
Yenkocamaro Posted August 27, 2015 Share Posted August 27, 2015 Some very cool subjects here, count me among those happy to have certain subjects regardless of what the material is. Here are a few that I've modified: Bill, are these all 1/25th scale? Cheers, Lance Quote Link to comment Share on other sites More sharing options...
Longbox55 Posted August 27, 2015 Share Posted August 27, 2015 I might have to see if I can find one of those 1/25 Olivers. Finding any 1/25 scale tractor is hard enough, I'm more than willing to use die cast if I have to.The tow truck is somewhat stalled at the moment, other projects have taken priority. It is currently sitting in primer, and I have modified the bed so it sits better on the chassis. Quote Link to comment Share on other sites More sharing options...
AzTom Posted August 29, 2015 Share Posted August 29, 2015 Bill, Here is one of the 1/25 Olivers. They were also made as a shelf model, same but no inscription. I also have a White Oliver in red and a Minneapolis Moline on my fokti page. Just click on the photo. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.