1/16th Amt 1984 Petty Grand Prix

22 posts in this topic

Posted

I always wondered how the amt 1/16th kits were. This one was sent by the same client I did the 73 1/16th charger for... This kit was pure hassle from the time I opened the box! Lots of mods to make it look "decent" especially the stance. Built boxstock with PPG Petty blue, sem stoplight red, and dupont clear with slixx decals........ glad it is done!!

DaveT

P1010057-vi.jpg

P1010058-vi.jpg

P1010059-vi.jpg

P1010060-vi.jpg

P1010061-vi.jpg

P1010062-vi.jpg

P1010063-vi.jpg

P1010064-vi.jpg

P1010056-vi.jpg

Share this post


Link to post
Share on other sites

Posted

Wow! It turned out really nice! I didn't even know they made these. Great job.

Share this post


Link to post
Share on other sites

Posted

I was just asking you about this one Dave! Looks great! Funny you mentioned the suspension because I was nervous about that. I was thinking of building mine with the wheels off and detailing the brakes and such, just to avoid the ride height!

Yours, as always, looks top notch!!!

Jamie

Share this post


Link to post
Share on other sites

Posted

Thanks Guys....

Jamie...... its quite an undertaking to get the stance right.. I would like to pick up the T-bird just out of curiosity.....

Man this part of this board is FREAKIN DEAD!!!!! Guess I better get on my 49 merc...... ;)

DaveT

Share this post


Link to post
Share on other sites

Posted (edited)

Thanks Guys....

Jamie...... its quite an undertaking to get the stance right.. I would like to pick up the T-bird just out of curiosity.....

Man this part of this board is FREAKIN DEAD!!!!! Guess I better get on my 49 merc...... ;)

DaveT

HAHAHA! Yeah I was thinking of brushing off my Rat Rod the other day. A nice shade of primer should get them looking here... ;)

I'm really tempted to get the Ford too......But I bought a set of Wrangler Decals off that site I told you about. $44.... But they are in scale and I REALLY didn't feel like building a STP car. No offense...lol

Edited by jamie

Share this post


Link to post
Share on other sites

Posted (edited)

HAHAHA! Yeah I was thinking of brushing off my Rat Rod the other day. A nice shade of primer should get them looking here... ;)

I'm really tempted to get the Ford too......But I bought a set of Wrangler Decals off that site I told you about. $44.... But they are in scale and I REALLY didn't feel like building a STP car. No offense...lol

BELIEVE ME, I am all STP'ed out!!! ;)

I hope they dont bleed too bad on you... good luck dude!!! An earnhardt build on that thing should look sick!!

Edited by David Thibodeau

Share this post


Link to post
Share on other sites

Posted

That's a beauty Dave!! Despite all the hassles, it came out perfect man!

You guys are right too....this place is deader than Casey Atwood's career!

Share this post


Link to post
Share on other sites

Posted

That looks great, Dave, as usual. About 2 years ago I was given a Ford that's complete, but I have no usuable decals to put on it....been wanting to build it since. Way back on BAD when I was looking for photos of the #64 Sunny King Ford car, I had a guy that was supposedly willing to make me some decals, but never heard from him again.

Share this post


Link to post
Share on other sites

Posted

You guys are right too....this place is deader than Casey Atwood's career!

:o:o:o:o

Share this post


Link to post
Share on other sites

Posted

I don't know if anyone is even reading or responding to this thread anymore, but I was just able to score all 4 of the AMT 1/16 NASCAR kits on eBay for $100 (with free shipping). Each was factory sealed and I'm still surprised that I was the only one to bid on them! That aside, I'd love to know what specifically causes the ride height issues and what I should focus on to try to correct them. Thanks!

- Dan

Share this post


Link to post
Share on other sites

Posted

I don't know if anyone is even reading or responding to this thread anymore, but I was just able to score all 4 of the AMT 1/16 NASCAR kits on eBay for $100 (with free shipping). Each was factory sealed and I'm still surprised that I was the only one to bid on them! That aside, I'd love to know what specifically causes the ride height issues and what I should focus on to try to correct them. Thanks!

- Dan

You will have to work the front suspesion components to lower the stance, also the roll cage assembly have to be worked over not only to get the correct fit, but also profile inside the body. The body on these kits are usualy thick, and the contours usualy have to be massage to get a more correct look. The Petty car you see at the thread had a TON and half of work done to it to make it look that good, out of the box/built stock these models look more like toys than scale model cars, but with work...a LOT of work they do have potential as evidence of the great Petty/STP model shown here.

Share this post


Link to post
Share on other sites

Posted

Thanks for the response. I saw a build up of the same car on another site and the ride height was terrible. At least now I know what to look out for.

You will have to work the front suspesion components to lower the stance, also the roll cage assembly have to be worked over not only to get the correct fit, but also profile inside the body. The body on these kits are usualy thick, and the contours usualy have to be massage to get a more correct look. The Petty car you see at the thread had a TON and half of work done to it to make it look that good, out of the box/built stock these models look more like toys than scale model cars, but with work...a LOT of work they do have potential as evidence of the great Petty/STP model shown here.

You will have to work the front suspesion components to lower the stance, also the roll cage assembly have to be worked over not only to get the correct fit, but also profile inside the body. The body on these kits are usualy thick, and the contours usualy have to be massage to get a more correct look. The Petty car you see at the thread had a TON and half of work done to it to make it look that good, out of the box/built stock these models look more like toys than scale model cars, but with work...a LOT of work they do have potential as evidence of the great Petty/STP model shown here.

Share this post


Link to post
Share on other sites

Posted

Oops, I was logged in under a profile that I never use and created in error. Thanks for the info, Fred. Do you know if the same problems exist with the two Thunderbird kits?

Share this post


Link to post
Share on other sites

Posted

Very nice build...looks great..!

Share this post


Link to post
Share on other sites

Posted

First time I've seen this post. Also the first time I've seen this brick actually look like a race car.  Great work.

Share this post


Link to post
Share on other sites

Posted

Oops, I was logged in under a profile that I never use and created in error. Thanks for the info, Fred. Do you know if the same problems exist with the two Thunderbird kits?

Yes, you will have more or less the same problems with the Fords kits. in fact the body will need a LOT of attention  to get a correct....in my VERY personal opinion...profile and look. The Thunderbird I did years ago had a lot of flash oh the rollcage pieces and some pieces where warped, and those are quite thick! Again this is my very personal opinion and experience building...long ago...these kits, but I belive every kit have potential so with patience and work they can look very nice as a representative piece.

Share this post


Link to post
Share on other sites

Posted

Yes, you will have more or less the same problems with the Fords kits. in fact the body will need a LOT of attention  to get a correct....in my VERY personal opinion...profile and look. The Thunderbird I did years ago had a lot of flash oh the rollcage pieces and some pieces where warped, and those are quite thick! Again this is my very personal opinion and experience building...long ago...these kits, but I belive every kit have potential so with patience and work they can look very nice as a representative piece.

Well, I'll be going in prepared now, so hopefully I can overcome these issues. I like the large scale and clearly, if the kit is done right, it makes a nice looking model. Thanks for the info!

Share this post


Link to post
Share on other sites

Posted

Fantastic build! I may have to find one.

Share this post


Link to post
Share on other sites

Posted

excellent as always.

Share this post


Link to post
Share on other sites

Posted

It might have been a PIA, but it sure looks good built.

 

 

Share this post


Link to post
Share on other sites

Posted

Great build..

Share this post


Link to post
Share on other sites

Posted

Great looking model sir .......... your building and painting talents are displayed very well B)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now