gotnitro? Posted November 23, 2015 Share Posted November 23, 2015 This build was inspired by the custom truck designers like Randy Grubb's Pissed off Pete, Tom Daniels show rods, and wandering thru the rat rod area of the local Syracuse Nats car show.I had a few trucks parts laying around, and after chatting w a model buddy..he prodded me to build our version of a show rod. The plan was to combine the Lil Tanker barrel, Pete 359 cab, and a HUGE Detriot 12V71 for wicked power ....follow along! I started w a vintage Pete 359..the one w the odd green glass no less! I wanted an aggressive chop , so out came the tape and marked out the sections to remove. After careful testing, a few small corrections..and slowly gluing things back together..we had a proper wedge chop.. An aggressive truck like this needed a scratchbuilt frame to keep the rod look..evergreen tubing was used for the frame, z'd the front, and c notched the rears Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 23, 2015 Author Share Posted November 23, 2015 I wanted the body laying frame..so a custom rear suspension would be needed. The straw poll all said BAG IT !!! I took a few O rings and attached to a spare Lonestar Axle..and built a semi 4 link rear end. Mock up time !!! I wanted the semi truck theme throughout the build so a set of Mobuis wheels were used..the huge rear tires were sourced from evil bay The back was looking good so far..but what about the front? Several ideas tossed around..radius rods, hairpins, etc...I settled on unequal length radius rods. Now i needed "batwings" huh??? Speeedway catalog arrrived, and the muddy waters cleared!! stay tuned.. Quote Link to comment Share on other sites More sharing options...
Petetrucker07 Posted November 23, 2015 Share Posted November 23, 2015 Oh my, your makin me blush. This is gonna be a sexy beast! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 23, 2015 Author Share Posted November 23, 2015 My buddy had a 1/16 scale Bob Daudek machined metal axle perfect for this build. The larger scale would keep the scale fidelity of the semi truck appearance. Taking his advice, I pinned a few plastic rods together and did a front mockup. All the plastic tubing would eventually be swapped over to polished Albion Alloys tube.. There's more to come..enjoy! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 23, 2015 Author Share Posted November 23, 2015 K, last one for tonite! The kit grill from the Pete wrecker was too wide for the rod chassis..so the center was removed. The width of the pete emblem was about right. The emblem would be replaced later using the "foil casting " method ...another new skill to learn! The grill also needed surgery for he new height, so emergency gastric bypass removed the unnecessary belly fat. I loved the slats the pissed off pete had on its grill, so plastic strip was chosen for mine. Thanks for watching ! Quote Link to comment Share on other sites More sharing options...
72 Charger Posted November 23, 2015 Share Posted November 23, 2015 Great work Jeff . That frame is really nice to . I have a Rat Rig planned but I was stuck on how to do the frame . Yours is very close to what I was after. So thanks for the unintended help Nice work on the slatted grille too keep it up Quote Link to comment Share on other sites More sharing options...
blackbeard Posted November 23, 2015 Share Posted November 23, 2015 x2 Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 23, 2015 Author Share Posted November 23, 2015 (edited) Doobie- glad my unintended help was helpful! The frame was really simple using hot rod chassis for ideas!hope ya decide to build one, it's very addicting. If there's any area ya want more pics of ask..I have a bunch of mock up pics .More tonite! Oh...spoiler alert..if you happen to wander into the pics of the Fulton truck show this wknd, you'll see the finished build! Edited November 23, 2015 by gotnitro? Quote Link to comment Share on other sites More sharing options...
tbill Posted November 23, 2015 Share Posted November 23, 2015 yes indeed, this is another killer build off your bench glad to see you got the picture thing sorted out. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 23, 2015 Author Share Posted November 23, 2015 Thanks Tom! I had to wrap these builds up after hearing some fantastic news !! I figured I better show a picture that inspired this build Heres the finished grill after foil casting..a VERY useful technique..and adding my signature light bulbs.The headlights were so big, they actually show under the lenses! Rod turned using my motor tool.. after all the mock ups it was off to paint!! My buddy advised the combo, and it was perfect for the rod. Testors Blazing Back lower, and White lightning Pearl for the roof. the frame was Gloss Black from the can too. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 23, 2015 Author Share Posted November 23, 2015 (edited) I went old school for the interior, wanting to try painting a convincing heavy, knotty wood grain. The dash was painted in several sessions, layering colors like weathering armor. The roof headliner trim received the same treatment. The actual headliner was a wrapper from a very tasty popular ice cream bar!! The steering wheel was painted Phonetian cream..keeping the retro theme going While the cab was drying, the plastic rods used during mock up were replaced w polished 2mm aluminum rod from Albion Alloys.The rod ends and hardware are from rb motion, close up of the bat wings.. everything attached to the fantastic machined axle from Bob Daudek Thanks for looking ! Edited November 23, 2015 by gotnitro? Quote Link to comment Share on other sites More sharing options...
purepmd Posted November 24, 2015 Share Posted November 24, 2015 Pretty slick! Great build quality! Going to follow this one, closely. Very cool. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 25, 2015 Author Share Posted November 25, 2015 (edited) Finishing up the build here..time for those sick, smoothy headers! I used silver solder for the headers, rolled over pvc pipe to prevent dings, and mounted in holes pre drilled in the "buzzin dozen". Looking at pics of the "32 Ford, the quintessential and most recognized hot rod ever, I wanted to pay homage to the body mounted pitman, and long drag link. This also kept my headers even on both sides. Tying the headers to the exhaust stacks( KS tubing) , I used another hot rod theme..lake pipe!I The lettering was model RR waterslides, the name you wonder??? What else would a hot rod Pete carry in that tank ?/ lol!! Any questions or comment welcome! Jeff Edited November 25, 2015 by gotnitro? Quote Link to comment Share on other sites More sharing options...
Petetrucker07 Posted November 26, 2015 Share Posted November 26, 2015 This is awesome. It definitely looks pissed off. I like the little tank on there. Quote Link to comment Share on other sites More sharing options...
Old Buckaroo Posted November 26, 2015 Share Posted November 26, 2015 Jeff - really impressive scratch building, reminds me of old custom rods from another era. I would figure that tank is full of Diesel to fuel that thirsty engine ! Quote Link to comment Share on other sites More sharing options...
Crazy Ed Posted November 26, 2015 Share Posted November 26, 2015 Excellent build Jeff. Holding to the detail all the way to the Insturment Panel. The tank needs to be marked Pure Corn Quote Link to comment Share on other sites More sharing options...
blackbeard Posted November 26, 2015 Share Posted November 26, 2015 x2 Quote Link to comment Share on other sites More sharing options...
kilrathy10 Posted November 26, 2015 Share Posted November 26, 2015 That is nothing short of awesome..... Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted November 26, 2015 Share Posted November 26, 2015 This is killer. Quote Link to comment Share on other sites More sharing options...
gino Posted November 26, 2015 Share Posted November 26, 2015 wow ! awesome work ! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 26, 2015 Author Share Posted November 26, 2015 (edited) Thanks for all the comments !! This build so much fun , breaking all the normal "rules" and just allowing the model to express its attitude. Part of modeling for me is learning about real trucks, chassis, and such.I ve watched everyone use these skills here everyday, I just borrowed a few Since the bird is cooking, a few quick outside pics were in order. enjoy! Hope I dont get banned for the license plate Edited November 26, 2015 by gotnitro? Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted November 26, 2015 Author Share Posted November 26, 2015 Happy Thanksgiving everyone Quote Link to comment Share on other sites More sharing options...
wrecker388 Posted November 26, 2015 Share Posted November 26, 2015 That is awesome! Quote Link to comment Share on other sites More sharing options...
blackbeard Posted November 26, 2015 Share Posted November 26, 2015 x2 Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted November 26, 2015 Share Posted November 26, 2015 That is way cool! You did a really fine job on this unique build. Be Well Gator Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.