sflam123 Posted February 8, 2016 Share Posted February 8, 2016 I'll start this by making sure everyone knows that I am not bashing Slixx decals!! I love their product. With that said, I need some help from the forum members. I have been having difficulty with some Slixx sheets that I bought directly from Slixx about a year ago. The decals are literally "shattering" when I get them wet and before they even loosen from the paper. I have used Slixx decals for several years, and I've not had this problem before, so it is probably something I'm doing, but for the life of me I can't figure out what or why. Here is my procedure: I run some warm (not hot) water in a glass bowl (cereal sized). I cut the decal as close to the actual decal as possible from the sheet, place it in the water for about 10-15 seconds (until it is good and wet) place it on a paper towel (face up) for about 2-3 minutes and then check to see if it has loosened from the paper. This has worked fine for all waterslide decals for years, but the last three Slixx decal sheets I've used the decal will break in to multiple pieces within in a minute or so of me placing it on the paper towel. I'm open to all thoughts, ideas, criticisms, whatever. I just want to solve my issue Thanks in advance for the help!! Quote Link to comment Share on other sites More sharing options...
High octane Posted February 8, 2016 Share Posted February 8, 2016 If you're having problems like that with your decals, I suggest that you spray the decal sheets with a couple light coats of clear lacquer and let them dry for 24 hours before using them. This should cure the problem I hope. Quote Link to comment Share on other sites More sharing options...
Pete J. Posted February 8, 2016 Share Posted February 8, 2016 If you're having problems like that with your decals, I suggest that you spray the decal sheets with a couple light coats of clear lacquer and let them dry for 24 hours before using them. This should cure the problem I hope.x2 Quote Link to comment Share on other sites More sharing options...
TomZ Posted February 8, 2016 Share Posted February 8, 2016 I use Krylon Krystal Klear to overcoat questionable decals. Seems to work pretty well. Quote Link to comment Share on other sites More sharing options...
Dave Van Posted February 9, 2016 Share Posted February 9, 2016 Slixx had a bad batch of decals a number of years ago......are your new issue decals or older items. You are doing nothing wrong....the clear carrier was applied wrong....to thick, thin or an issue with type of carrier. If you just bought them I'd check with Slixx. I've manufactured decals for almost 40 years....happens to the best. Quote Link to comment Share on other sites More sharing options...
sflam123 Posted February 9, 2016 Author Share Posted February 9, 2016 Mr. Van, the decals that I'm having problems with are about a year old, plus or minus a couple of months. I ordered several in the fall of 2014 approx. So not new, but not old either. Quote Link to comment Share on other sites More sharing options...
Daddyfink Posted February 9, 2016 Share Posted February 9, 2016 I would first contact Gene at Slixx before doing anything to the decals and let him know, he took care of me when I had the same problem a few years back. Quote Link to comment Share on other sites More sharing options...
Chris in Berwyn Posted February 9, 2016 Share Posted February 9, 2016 Agree about contacting Gene. They sent a few new sets altho they cracked too. They said to use water out of the tap as hot as possible. At least with the extra sets I had somewhat better luck. Quote Link to comment Share on other sites More sharing options...
Truck parts Posted February 10, 2016 Share Posted February 10, 2016 I had the same problem years ago ,and. they sent me a new set without a charge to me Quote Link to comment Share on other sites More sharing options...
sflam123 Posted February 11, 2016 Author Share Posted February 11, 2016 Thanks for all the responses. I appreciate them! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.