Tyler62990 Posted February 25, 2016 Share Posted February 25, 2016 This is my take on the Revell '37 Ford Pickup 2n1. The carbs were lost to the sink drain before this build even began. They were substituted with two of the very nice Strombergs from the new Revell '29 Model A kit. The stacks are aluminum tubing. Throttle linkage and fuel lines were made from solder. The radiator supports are music wire and 15/0 seed beads at the firewall. The radiator had no detail on the front side, so a piece of screen patterned fabric was used to busy it up a bit. The beer keg was made from a ceiling fan pull switch, sheet plastic, plastic tubing, necklace chain and a filler neck from an AMT 40 Ford. Paint is Rustoleum red and black primer, and Model Master Olive Drab. The rust is Sophisticated Finishes Rusting System, topped with some Tamiya weathering powders. Thanks for looking! Quote Link to comment Share on other sites More sharing options...
Tyler62990 Posted February 25, 2016 Author Share Posted February 25, 2016 Quote Link to comment Share on other sites More sharing options...
Tyler62990 Posted February 25, 2016 Author Share Posted February 25, 2016 Quote Link to comment Share on other sites More sharing options...
bondo bill Posted February 25, 2016 Share Posted February 25, 2016 very kool build Quote Link to comment Share on other sites More sharing options...
Daxman Posted February 25, 2016 Share Posted February 25, 2016 Very nice! I like this a lot. Quote Link to comment Share on other sites More sharing options...
Greg Pugh Posted February 25, 2016 Share Posted February 25, 2016 That's pretty darn cool! Nice job! Quote Link to comment Share on other sites More sharing options...
Davewilly Posted February 26, 2016 Share Posted February 26, 2016 Looks Great...I like the license plates as door panels..nice touch! Quote Link to comment Share on other sites More sharing options...
Jantrix Posted February 26, 2016 Share Posted February 26, 2016 Very nicely done. It's got a cool authentic look that I like a lot. Quote Link to comment Share on other sites More sharing options...
68shortfleet Posted February 26, 2016 Share Posted February 26, 2016 Well done. Quote Link to comment Share on other sites More sharing options...
Sixties Sam Posted February 26, 2016 Share Posted February 26, 2016 Very good work on this truck! The weathering is just right. The beer keg tank is a great touch!Sam Quote Link to comment Share on other sites More sharing options...
afx Posted February 26, 2016 Share Posted February 26, 2016 The patina is nicely done. Quote Link to comment Share on other sites More sharing options...
JTalmage Posted February 26, 2016 Share Posted February 26, 2016 Great work! Quote Link to comment Share on other sites More sharing options...
Tommy Isbister Posted February 26, 2016 Share Posted February 26, 2016 You nailed the rust and faded door lettering. I admire a builder who goes after it and nails it like you did. Great job! Quote Link to comment Share on other sites More sharing options...
ChrisR Posted February 27, 2016 Share Posted February 27, 2016 Looks great! Quote Link to comment Share on other sites More sharing options...
hgbben Posted February 27, 2016 Share Posted February 27, 2016 Very well executed Quote Link to comment Share on other sites More sharing options...
V8 Trucker Posted February 29, 2016 Share Posted February 29, 2016 flashy model of, great made! Quote Link to comment Share on other sites More sharing options...
wayne swayze Posted February 29, 2016 Share Posted February 29, 2016 Nicely done! Quote Link to comment Share on other sites More sharing options...
1930fordpickup Posted February 29, 2016 Share Posted February 29, 2016 Looks like a real one. Good job. Quote Link to comment Share on other sites More sharing options...
Intmd8r Posted February 29, 2016 Share Posted February 29, 2016 Nice work!I love this kit - builds real nice, rusty or shinny. Quote Link to comment Share on other sites More sharing options...
carrucha Posted March 1, 2016 Share Posted March 1, 2016 Neat beater truck. Good job. Quote Link to comment Share on other sites More sharing options...
slusher Posted March 1, 2016 Share Posted March 1, 2016 Awesome build.. Quote Link to comment Share on other sites More sharing options...
vintagercr Posted March 1, 2016 Share Posted March 1, 2016 That's pretty cool! Quote Link to comment Share on other sites More sharing options...
Tyler62990 Posted March 3, 2016 Author Share Posted March 3, 2016 Thanks a lot guys! Always appreciated Quote Link to comment Share on other sites More sharing options...
kilrathy10 Posted March 3, 2016 Share Posted March 3, 2016 This is a good build, Man....Very nice work....I like the weathering, for sure.....Great job.... Quote Link to comment Share on other sites More sharing options...
DumpyDan Posted March 5, 2016 Share Posted March 5, 2016 Now this looks sweet, nice work Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.